All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bryan Brattlof <bb@ti.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amitk@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>
Cc: Keerthy <j-keerthy@ti.com>, Linux PM <linux-pm@vger.kernel.org>,
	Device Trees <devicetree@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	LKML ARM <linux-arm-kernel@lists.infradead.org>,
	Bryan Brattlof <bb@ti.com>
Subject: [PATCH v3 08/11] arm64: dts: ti: k3-am62-wakeup: add VTM node
Date: Mon, 31 Oct 2022 18:26:59 -0500	[thread overview]
Message-ID: <20221031232702.10339-9-bb@ti.com> (raw)
In-Reply-To: <20221031232702.10339-1-bb@ti.com>

The am62x supports a single Voltage and Thermal Management (VTM) module
located in the wakeup domain with two associated temperature monitors
located in hot spots of the die.

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi | 33 +++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi  |  8 +++++
 arch/arm64/boot/dts/ti/k3-am62.dtsi         |  7 ++++-
 3 files changed, 47 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi

diff --git a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
new file mode 100644
index 0000000000000..1819a6948b19d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 4090134676cf6..3954a73a33f35 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -38,4 +38,12 @@ wkup_i2c0: i2c@2b200000 {
 		clocks = <&k3_clks 107 4>;
 		clock-names = "fck";
 	};
+
+	vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index 37fcbe7a3c336..1795f3ee534e0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -80,6 +80,7 @@ cbass_main: bus@f0000 {
 			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
 
 			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
 			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 
@@ -94,10 +95,14 @@ cbass_wakeup: bus@2b000000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges = <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
 				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 		};
 	};
+
+	#include "k3-am62-thermal.dtsi"
+
 };
 
 /* Now include the peripherals for each bus segments */
-- 
2.38.1


WARNING: multiple messages have this Message-ID (diff)
From: Bryan Brattlof <bb@ti.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amitk@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>
Cc: Keerthy <j-keerthy@ti.com>, Linux PM <linux-pm@vger.kernel.org>,
	Device Trees <devicetree@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>,
	LKML ARM <linux-arm-kernel@lists.infradead.org>,
	Bryan Brattlof <bb@ti.com>
Subject: [PATCH v3 08/11] arm64: dts: ti: k3-am62-wakeup: add VTM node
Date: Mon, 31 Oct 2022 18:26:59 -0500	[thread overview]
Message-ID: <20221031232702.10339-9-bb@ti.com> (raw)
In-Reply-To: <20221031232702.10339-1-bb@ti.com>

The am62x supports a single Voltage and Thermal Management (VTM) module
located in the wakeup domain with two associated temperature monitors
located in hot spots of the die.

Signed-off-by: Bryan Brattlof <bb@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi | 33 +++++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi  |  8 +++++
 arch/arm64/boot/dts/ti/k3-am62.dtsi         |  7 ++++-
 3 files changed, 47 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi

diff --git a/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
new file mode 100644
index 0000000000000..1819a6948b19d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-thermal.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/thermal/thermal.h>
+
+thermal_zones: thermal-zones {
+	main0_thermal: main0-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&vtm0 0>;
+
+		trips {
+			main0_crit: main0-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+
+	main1_thermal: main1-thermal {
+		polling-delay-passive = <250>;	/* milliSeconds */
+		polling-delay = <500>;		/* milliSeconds */
+		thermal-sensors = <&vtm0 1>;
+
+		trips {
+			main1_crit: main1-crit {
+				temperature = <105000>;	/* milliCelsius */
+				hysteresis = <2000>;	/* milliCelsius */
+				type = "critical";
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 4090134676cf6..3954a73a33f35 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -38,4 +38,12 @@ wkup_i2c0: i2c@2b200000 {
 		clocks = <&k3_clks 107 4>;
 		clock-names = "fck";
 	};
+
+	vtm0: temperature-sensor@b00000 {
+		compatible = "ti,j7200-vtm";
+		reg = <0x00 0xb00000 0x00 0x400>,
+		      <0x00 0xb01000 0x00 0x400>;
+		power-domains = <&k3_pds 95 TI_SCI_PD_EXCLUSIVE>;
+		#thermal-sensor-cells = <1>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62.dtsi b/arch/arm64/boot/dts/ti/k3-am62.dtsi
index 37fcbe7a3c336..1795f3ee534e0 100644
--- a/arch/arm64/boot/dts/ti/k3-am62.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62.dtsi
@@ -80,6 +80,7 @@ cbass_main: bus@f0000 {
 			 <0x00 0x04000000 0x00 0x04000000 0x00 0x01ff1400>,
 
 			 /* Wakeup Domain Range */
+			 <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
 			 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>,
 			 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 
@@ -94,10 +95,14 @@ cbass_wakeup: bus@2b000000 {
 			compatible = "simple-bus";
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges = <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
+			ranges = <0x00 0x00b00000 0x00 0x00b00000 0x00 0x00002400>, /* VTM */
+				 <0x00 0x2b000000 0x00 0x2b000000 0x00 0x00300400>, /* Peripheral Window */
 				 <0x00 0x43000000 0x00 0x43000000 0x00 0x00020000>;
 		};
 	};
+
+	#include "k3-am62-thermal.dtsi"
+
 };
 
 /* Now include the peripherals for each bus segments */
-- 
2.38.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-10-31 23:27 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-10-31 23:26 [PATCH v3 00/11] enable VTM node for all TI's K3 SoCs Bryan Brattlof
2022-10-31 23:26 ` Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 01/11] thermal: k3_j72xx_bandgap: simplify k3_thermal_get_temp() function Bryan Brattlof
2022-10-31 23:26   ` Bryan Brattlof
2022-12-09 15:26   ` [thermal: thermal/next] thermal/drivers/k3_j72xx_bandgap: Simplify " thermal-bot for Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 02/11] thermal: k3_j72xx_bandgap: use bool for i2128 erratum flag Bryan Brattlof
2022-10-31 23:26   ` Bryan Brattlof
2022-12-09 15:26   ` [thermal: thermal/next] thermal/drivers/k3_j72xx_bandgap: Use " thermal-bot for Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 03/11] thermal: k3_j72xx_bandgap: remove fuse_base from structure Bryan Brattlof
2022-10-31 23:26   ` Bryan Brattlof
2022-12-09 15:26   ` [thermal: thermal/next] thermal/drivers/k3_j72xx_bandgap: Remove " thermal-bot for Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 04/11] thermal: k3_j72xx_bandgap: map fuse_base only for erratum workaround Bryan Brattlof
2022-10-31 23:26   ` Bryan Brattlof
2022-12-09 15:26   ` [thermal: thermal/next] thermal/drivers/k3_j72xx_bandgap: Map " thermal-bot for Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 05/11] dt-bindings: thermal: k3-j72xx: elaborate on binding description Bryan Brattlof
2022-10-31 23:26   ` Bryan Brattlof
2022-12-09 15:26   ` [thermal: thermal/next] " thermal-bot for Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 06/11] dt-bindings: thermal: k3-j72xx: conditionally require efuse reg range Bryan Brattlof
2022-10-31 23:26   ` Bryan Brattlof
2022-12-09 15:26   ` [thermal: thermal/next] " thermal-bot for Bryan Brattlof
2022-10-31 23:26 ` [PATCH v3 07/11] arm64: dts: ti: k3-am64-main: add VTM node Bryan Brattlof
2022-10-31 23:26   ` Bryan Brattlof
2022-10-31 23:26 ` Bryan Brattlof [this message]
2022-10-31 23:26   ` [PATCH v3 08/11] arm64: dts: ti: k3-am62-wakeup: " Bryan Brattlof
2022-10-31 23:27 ` [PATCH v3 09/11] arm64: dts: ti: k3-j721e-mcu-wakeup: " Bryan Brattlof
2022-10-31 23:27   ` Bryan Brattlof
2022-10-31 23:27 ` [PATCH v3 10/11] arm64: dts: ti: k3-j721s2-mcu-wakeup: " Bryan Brattlof
2022-10-31 23:27   ` Bryan Brattlof
2022-10-31 23:27 ` [PATCH v3 11/11] arm64: dts: ti: k3-j7200-mcu-wakeup: " Bryan Brattlof
2022-10-31 23:27   ` Bryan Brattlof
2022-12-06 17:02 ` [PATCH v3 00/11] enable VTM node for all TI's K3 SoCs Daniel Lezcano
2022-12-06 17:02   ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221031232702.10339-9-bb@ti.com \
    --to=bb@ti.com \
    --cc=amitk@kernel.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=j-keerthy@ti.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.