From: Shawn Guo <shawnguo@kernel.org> To: soc@kernel.org, arm@kernel.org Cc: Fabio Estevam <festevam@gmail.com>, Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>, kernel@pengutronix.de, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [GIT PULL] i.MX fixes for 6.1 Date: Tue, 1 Nov 2022 11:15:47 +0800 [thread overview] Message-ID: <20221101031547.GB125525@dragon> (raw) The following changes since commit 9abf2313adc1ca1b6180c508c25f22f9395cc780: Linux 6.1-rc1 (2022-10-16 15:36:24 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.1 for you to fetch changes up to d5c921a53c80dfa942f6dff36253db5a50775a5f: arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers (2022-10-29 20:31:24 +0800) ---------------------------------------------------------------- i.MX fixes for 6.1: - Fix imx93-pd driver to release resources when error occurs in probe. - A series from Ioana Ciornei to add missing clock frequencies for MDIO controllers on LayerScape SoCs, so that the kernel driver can work independently from bootloader. - A series from Li Jun to fix USB power domain setup in i.MX8MM/N device trees. - Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering with CPLD power off functionality. - Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board. - Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device tree. - Fix up gpcv2 DT bindings to have an optional `power-domains` property. - A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges of GPIO controllers. - Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to work around a hardware design flaw in supply voltage distribution. - Fix user push-button GPIO offset on imx6qdl-gw59 boards. ---------------------------------------------------------------- Christophe JAILLET (1): soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe() Ioana Ciornei (3): arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers Li Jun (4): arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsio arm64: dts: imx8mm: correct usb power domains arm64: dts: imx8mn: remove otg1 power domain dependency on hsio arm64: dts: imx8mn: Correct the usb power domain Marek Vasut (1): arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo Max Krummenacher (1): arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci Peng Fan (4): arm64: dts: imx8: correct clock order dt-bindings: power: gpcv2: add power-domains property arm64: dts: imx93: correct s4mu interrupt names arm64: dts: imx93: correct gpio-ranges Petr Benes (1): ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP Tim Harvey (1): ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset .../devicetree/bindings/power/fsl,imx-gpcv2.yaml | 3 +++ arch/arm/boot/dts/imx6q-yapp4-crux.dts | 4 ++++ arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 2 +- arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 ++++++ arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 ++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 ++++++ arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 18 +++++++++--------- arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 16 ++++++++-------- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 8 ++++---- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 4 ++-- arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 20 ++++++++++---------- arch/arm64/boot/dts/freescale/imx93.dtsi | 11 ++++++----- drivers/soc/imx/imx93-pd.c | 17 +++++++++++++++-- 15 files changed, 85 insertions(+), 42 deletions(-)
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org> To: soc@kernel.org, arm@kernel.org Cc: Fabio Estevam <festevam@gmail.com>, Stefan Agner <stefan@agner.ch>, Li Yang <leoyang.li@nxp.com>, kernel@pengutronix.de, linux-imx@nxp.com, linux-arm-kernel@lists.infradead.org Subject: [GIT PULL] i.MX fixes for 6.1 Date: Tue, 1 Nov 2022 11:15:47 +0800 [thread overview] Message-ID: <20221101031547.GB125525@dragon> (raw) The following changes since commit 9abf2313adc1ca1b6180c508c25f22f9395cc780: Linux 6.1-rc1 (2022-10-16 15:36:24 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git tags/imx-fixes-6.1 for you to fetch changes up to d5c921a53c80dfa942f6dff36253db5a50775a5f: arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers (2022-10-29 20:31:24 +0800) ---------------------------------------------------------------- i.MX fixes for 6.1: - Fix imx93-pd driver to release resources when error occurs in probe. - A series from Ioana Ciornei to add missing clock frequencies for MDIO controllers on LayerScape SoCs, so that the kernel driver can work independently from bootloader. - A series from Li Jun to fix USB power domain setup in i.MX8MM/N device trees. - Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering with CPLD power off functionality. - Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board. - Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device tree. - Fix up gpcv2 DT bindings to have an optional `power-domains` property. - A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges of GPIO controllers. - Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to work around a hardware design flaw in supply voltage distribution. - Fix user push-button GPIO offset on imx6qdl-gw59 boards. ---------------------------------------------------------------- Christophe JAILLET (1): soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe() Ioana Ciornei (3): arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers Li Jun (4): arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsio arm64: dts: imx8mm: correct usb power domains arm64: dts: imx8mn: remove otg1 power domain dependency on hsio arm64: dts: imx8mn: Correct the usb power domain Marek Vasut (1): arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo Max Krummenacher (1): arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci Peng Fan (4): arm64: dts: imx8: correct clock order dt-bindings: power: gpcv2: add power-domains property arm64: dts: imx93: correct s4mu interrupt names arm64: dts: imx93: correct gpio-ranges Petr Benes (1): ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP Tim Harvey (1): ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset .../devicetree/bindings/power/fsl,imx-gpcv2.yaml | 3 +++ arch/arm/boot/dts/imx6q-yapp4-crux.dts | 4 ++++ arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 2 +- arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts | 4 ++++ arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 6 ++++++ arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 6 ++++++ arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 6 ++++++ arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 18 +++++++++--------- arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts | 16 ++++++++-------- arch/arm64/boot/dts/freescale/imx8mm.dtsi | 8 ++++---- arch/arm64/boot/dts/freescale/imx8mn.dtsi | 4 ++-- arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 20 ++++++++++---------- arch/arm64/boot/dts/freescale/imx93.dtsi | 11 ++++++----- drivers/soc/imx/imx93-pd.c | 17 +++++++++++++++-- 15 files changed, 85 insertions(+), 42 deletions(-) _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-11-01 3:15 UTC|newest] Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-01 3:15 Shawn Guo [this message] 2022-11-01 3:15 ` [GIT PULL] i.MX fixes for 6.1 Shawn Guo 2022-11-01 11:30 ` patchwork-bot+linux-soc
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221101031547.GB125525@dragon \ --to=shawnguo@kernel.org \ --cc=arm@kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=leoyang.li@nxp.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=soc@kernel.org \ --cc=stefan@agner.ch \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.