[PATCH v8 14/17] hw/pci-bridge/pcie_pci_bridge: Omit errp for pci_add_capability

[Akihiko Odaki <akihiko.odaki@daynix.com>]

Omitting errp for pci_add_capability() causes it to abort if
capabilities overlap. This behavior is appropriate heare because all of
the capabilities set in this device are defined in the program and
their overlap should not happen unless there is a programming error.

Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
---
 hw/pci-bridge/pcie_pci_bridge.c | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

diff --git a/hw/pci-bridge/pcie_pci_bridge.c b/hw/pci-bridge/pcie_pci_bridge.c
index 99778e3e24..1b839465e7 100644
--- a/hw/pci-bridge/pcie_pci_bridge.c
+++ b/hw/pci-bridge/pcie_pci_bridge.c
@@ -35,7 +35,7 @@ static void pcie_pci_bridge_realize(PCIDevice *d, Error **errp)
 {
     PCIBridge *br = PCI_BRIDGE(d);
     PCIEPCIBridge *pcie_br = PCIE_PCI_BRIDGE_DEV(d);
-    int rc, pos;
+    int rc;
 
     pci_bridge_initfn(d, TYPE_PCI_BUS);
 
@@ -49,12 +49,8 @@ static void pcie_pci_bridge_realize(PCIDevice *d, Error **errp)
 
     pcie_cap_init(d, 0, PCI_EXP_TYPE_PCI_BRIDGE, 0);
 
-    pos = pci_add_capability(d, PCI_CAP_ID_PM, 0, PCI_PM_SIZEOF, errp);
-    if (pos < 0) {
-        goto pm_error;
-    }
-    d->exp.pm_cap = pos;
-    pci_set_word(d->config + pos + PCI_PM_PMC, 0x3);
+    d->exp.pm_cap = pci_add_capability(d, PCI_CAP_ID_PM, 0, PCI_PM_SIZEOF);
+    pci_set_word(d->config + d->exp.pm_cap + PCI_PM_PMC, 0x3);
 
     pcie_cap_arifwd_init(d);
     pcie_cap_deverr_init(d);
@@ -85,7 +81,6 @@ static void pcie_pci_bridge_realize(PCIDevice *d, Error **errp)
 msi_error:
     pcie_aer_exit(d);
 aer_error:
-pm_error:
     pcie_cap_exit(d);
     shpc_cleanup(d, &pcie_br->shpc_bar);
 error:
-- 
2.38.1