All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Vinod Koul <vkoul@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Nathan Chancellor <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	Tom Rix <trix@redhat.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-phy@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<llvm@lists.linux.dev>, Eddie Hung <eddie.hung@mediatek.com>,
	Tianping Fang <tianping.fang@mediatek.com>
Subject: [PATCH v4 3/3] phy: mediatek: tphy: add debugfs files
Date: Thu, 10 Nov 2022 21:27:16 +0800	[thread overview]
Message-ID: <20221110132716.12294-3-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <20221110132716.12294-1-chunfeng.yun@mediatek.com>

These debugfs files are mainly used to make eye diagram test easier,
especially helpful to do HQA test for a new IC without efuse enabled.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v4: fix build warning of sometimes uninitialized variable

v3: fix typo of "debugfs" suggested by AngeloGioacchino

v2: add CONFIG_PHY_MTK_TPHY_DEBUGFS suggested by AngeloGioacchino
---
 drivers/phy/mediatek/Kconfig        |   5 +
 drivers/phy/mediatek/phy-mtk-tphy.c | 405 +++++++++++++++++++++++++++-
 2 files changed, 409 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 3125ecb5d119..e9fdfe9f519f 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -27,6 +27,11 @@ config PHY_MTK_TPHY
 	  multi-ports is first version, otherwise is second version,
 	  so you can easily distinguish them by banks layout.
 
+config PHY_MTK_TPHY_DEBUGFS
+	bool "Add T-PHY Debugfs Files"
+	help
+	  Say Y here to add debugfs files mainly for T-PHY HQA test.
+
 config PHY_MTK_UFS
 	tristate "MediaTek UFS M-PHY driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index e906a82791bd..f220a9a409bf 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/phy/phy.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 #include <linux/mfd/syscon.h>
@@ -264,6 +265,8 @@
 
 #define TPHY_CLKS_CNT	2
 
+#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
+
 enum mtk_phy_version {
 	MTK_PHY_V1 = 1,
 	MTK_PHY_V2,
@@ -310,6 +313,7 @@ struct mtk_phy_instance {
 	struct clk_bulk_data clks[TPHY_CLKS_CNT];
 	u32 index;
 	u32 type;
+	struct dentry *dbgfs;
 	struct regmap *type_sw;
 	u32 type_sw_reg;
 	u32 type_sw_index;
@@ -332,10 +336,391 @@ struct mtk_tphy {
 	const struct mtk_phy_pdata *pdata;
 	struct mtk_phy_instance **phys;
 	int nphys;
+	struct dentry *dbgfs_root;
 	int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
 	int src_coef; /* coefficient for slew rate calibrate */
 };
 
+#if IS_ENABLED(CONFIG_PHY_MTK_TPHY_DEBUGFS)
+
+enum u2_phy_params {
+	U2P_EYE_VRT = 0,
+	U2P_EYE_TERM,
+	U2P_EFUSE_EN,
+	U2P_EFUSE_INTR,
+	U2P_DISCTH,
+	U2P_PRE_EMPHASIS,
+};
+
+enum u3_phy_params {
+	U3P_EFUSE_EN = 0,
+	U3P_EFUSE_INTR,
+	U3P_EFUSE_TX_IMP,
+	U3P_EFUSE_RX_IMP,
+};
+
+static const char *const u2_phy_files[] = {
+	[U2P_EYE_VRT] = "vrt",
+	[U2P_EYE_TERM] = "term",
+	[U2P_EFUSE_EN] = "efuse",
+	[U2P_EFUSE_INTR] = "intr",
+	[U2P_DISCTH] = "discth",
+	[U2P_PRE_EMPHASIS] = "preemph",
+};
+
+static const char *const u3_phy_files[] = {
+	[U3P_EFUSE_EN] = "efuse",
+	[U3P_EFUSE_INTR] = "intr",
+	[U3P_EFUSE_TX_IMP] = "tx-imp",
+	[U3P_EFUSE_RX_IMP] = "rx-imp",
+};
+
+static int u2_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 max = 0;
+	u32 tmp = 0;
+	u32 val = 0;
+	int ret;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_VRT_SEL);
+		break;
+
+	case U2P_EYE_TERM:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_TERM_SEL);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc) {
+			tmp = readl(u2_banks->misc + U3P_MISC_REG1);
+			max = 1;
+		}
+
+		val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
+		break;
+
+	case U2P_EFUSE_INTR:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
+		max = FIELD_MAX(PA1_RG_INTR_CAL);
+		break;
+
+	case U2P_DISCTH:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
+		max = FIELD_MAX(PA6_RG_U2_DISCTH);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
+		max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u2_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u2_phy_params_show, inode->i_private);
+}
+
+static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val);
+		break;
+
+	case U2P_EYE_TERM:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc)
+			mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1,
+					     MR1_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U2P_EFUSE_INTR:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val);
+		break;
+
+	case U2P_DISCTH:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u2_phy_fops = {
+	.open = u2_phy_params_open,
+	.write = u2_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u2_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u2_phy_files[i], 0644, inst->dbgfs, inst, &u2_phy_fops);
+}
+
+static int u3_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	u32 val = 0;
+	u32 max = 0;
+	u32 tmp;
+	int ret;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
+		val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
+		max = 1;
+		break;
+
+	case U3P_EFUSE_INTR:
+		tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+		val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
+		max = FIELD_MAX(P3A_RG_IEXT_INTR);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+		val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+		val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_RX_IMPEL);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u3_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u3_phy_params_show, inode->i_private);
+}
+
+static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	void __iomem *phyd = u3_banks->phyd;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
+				     P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U3P_EFUSE_INTR:
+		mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR, val);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u3_phy_fops = {
+	.open = u3_phy_params_open,
+	.write = u3_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u3_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u3_phy_files[i], 0644, inst->dbgfs, inst, &u3_phy_fops);
+}
+
+static int tphy_type_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *type;
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		type = "USB2";
+		break;
+	case PHY_TYPE_USB3:
+		type = "USB3";
+		break;
+	case PHY_TYPE_PCIE:
+		type = "PCIe";
+		break;
+	case PHY_TYPE_SGMII:
+		type = "SGMII";
+		break;
+	case PHY_TYPE_SATA:
+		type = "SATA";
+		break;
+	default:
+		type = "";
+	}
+
+	seq_printf(sf, "%s\n", type);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(tphy_type);
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{
+	char name[16];
+
+	snprintf(name, sizeof(name) - 1, "phy.%d", inst->index);
+	inst->dbgfs = debugfs_create_dir(name, tphy->dbgfs_root);
+
+	debugfs_create_file("type", 0444, inst->dbgfs, inst, &tphy_type_fops);
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		u2_phy_dbgfs_files_create(inst);
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		u3_phy_dbgfs_files_create(inst);
+		break;
+	default:
+		break;
+	}
+}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{
+	debugfs_remove_recursive(inst->dbgfs);
+	inst->dbgfs = NULL;
+}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{
+	tphy->dbgfs_root = debugfs_create_dir(dev_name(tphy->dev), phy_debug_root);
+}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{
+	debugfs_remove_recursive(tphy->dbgfs_root);
+	tphy->dbgfs_root = NULL;
+}
+
+#else
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{}
+
+#endif
+
 static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
 	struct mtk_phy_instance *instance)
 {
@@ -1032,6 +1417,8 @@ static int mtk_phy_init(struct phy *phy)
 		return -EINVAL;
 	}
 
+	tphy_debugfs_init(tphy, instance);
+
 	return 0;
 }
 
@@ -1068,6 +1455,8 @@ static int mtk_phy_exit(struct phy *phy)
 	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
 	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
 
+	tphy_debugfs_exit(instance);
+
 	if (instance->type == PHY_TYPE_USB2)
 		u2_phy_instance_exit(tphy, instance);
 
@@ -1295,15 +1684,29 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 	}
 
 	provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
+	if (IS_ERR(provider))
+		return dev_err_probe(dev, PTR_ERR(provider), "probe failed\n");
+
+	tphy_debugfs_root_create(tphy);
+	return 0;
 
-	return PTR_ERR_OR_ZERO(provider);
 put_child:
 	of_node_put(child_np);
 	return retval;
 }
 
+static int mtk_tphy_remove(struct platform_device *pdev)
+{
+	struct mtk_tphy *tphy;
+
+	tphy = platform_get_drvdata(pdev);
+	tphy_debugfs_root_remove(tphy);
+	return 0;
+}
+
 static struct platform_driver mtk_tphy_driver = {
 	.probe		= mtk_tphy_probe,
+	.remove		= mtk_tphy_remove,
 	.driver		= {
 		.name	= "mtk-tphy",
 		.of_match_table = mtk_tphy_id_table,
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Vinod Koul <vkoul@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Nathan Chancellor <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	Tom Rix <trix@redhat.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-phy@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<llvm@lists.linux.dev>, Eddie Hung <eddie.hung@mediatek.com>,
	Tianping Fang <tianping.fang@mediatek.com>
Subject: [PATCH v4 3/3] phy: mediatek: tphy: add debugfs files
Date: Thu, 10 Nov 2022 21:27:16 +0800	[thread overview]
Message-ID: <20221110132716.12294-3-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <20221110132716.12294-1-chunfeng.yun@mediatek.com>

These debugfs files are mainly used to make eye diagram test easier,
especially helpful to do HQA test for a new IC without efuse enabled.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v4: fix build warning of sometimes uninitialized variable

v3: fix typo of "debugfs" suggested by AngeloGioacchino

v2: add CONFIG_PHY_MTK_TPHY_DEBUGFS suggested by AngeloGioacchino
---
 drivers/phy/mediatek/Kconfig        |   5 +
 drivers/phy/mediatek/phy-mtk-tphy.c | 405 +++++++++++++++++++++++++++-
 2 files changed, 409 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 3125ecb5d119..e9fdfe9f519f 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -27,6 +27,11 @@ config PHY_MTK_TPHY
 	  multi-ports is first version, otherwise is second version,
 	  so you can easily distinguish them by banks layout.
 
+config PHY_MTK_TPHY_DEBUGFS
+	bool "Add T-PHY Debugfs Files"
+	help
+	  Say Y here to add debugfs files mainly for T-PHY HQA test.
+
 config PHY_MTK_UFS
 	tristate "MediaTek UFS M-PHY driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index e906a82791bd..f220a9a409bf 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/phy/phy.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 #include <linux/mfd/syscon.h>
@@ -264,6 +265,8 @@
 
 #define TPHY_CLKS_CNT	2
 
+#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
+
 enum mtk_phy_version {
 	MTK_PHY_V1 = 1,
 	MTK_PHY_V2,
@@ -310,6 +313,7 @@ struct mtk_phy_instance {
 	struct clk_bulk_data clks[TPHY_CLKS_CNT];
 	u32 index;
 	u32 type;
+	struct dentry *dbgfs;
 	struct regmap *type_sw;
 	u32 type_sw_reg;
 	u32 type_sw_index;
@@ -332,10 +336,391 @@ struct mtk_tphy {
 	const struct mtk_phy_pdata *pdata;
 	struct mtk_phy_instance **phys;
 	int nphys;
+	struct dentry *dbgfs_root;
 	int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
 	int src_coef; /* coefficient for slew rate calibrate */
 };
 
+#if IS_ENABLED(CONFIG_PHY_MTK_TPHY_DEBUGFS)
+
+enum u2_phy_params {
+	U2P_EYE_VRT = 0,
+	U2P_EYE_TERM,
+	U2P_EFUSE_EN,
+	U2P_EFUSE_INTR,
+	U2P_DISCTH,
+	U2P_PRE_EMPHASIS,
+};
+
+enum u3_phy_params {
+	U3P_EFUSE_EN = 0,
+	U3P_EFUSE_INTR,
+	U3P_EFUSE_TX_IMP,
+	U3P_EFUSE_RX_IMP,
+};
+
+static const char *const u2_phy_files[] = {
+	[U2P_EYE_VRT] = "vrt",
+	[U2P_EYE_TERM] = "term",
+	[U2P_EFUSE_EN] = "efuse",
+	[U2P_EFUSE_INTR] = "intr",
+	[U2P_DISCTH] = "discth",
+	[U2P_PRE_EMPHASIS] = "preemph",
+};
+
+static const char *const u3_phy_files[] = {
+	[U3P_EFUSE_EN] = "efuse",
+	[U3P_EFUSE_INTR] = "intr",
+	[U3P_EFUSE_TX_IMP] = "tx-imp",
+	[U3P_EFUSE_RX_IMP] = "rx-imp",
+};
+
+static int u2_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 max = 0;
+	u32 tmp = 0;
+	u32 val = 0;
+	int ret;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_VRT_SEL);
+		break;
+
+	case U2P_EYE_TERM:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_TERM_SEL);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc) {
+			tmp = readl(u2_banks->misc + U3P_MISC_REG1);
+			max = 1;
+		}
+
+		val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
+		break;
+
+	case U2P_EFUSE_INTR:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
+		max = FIELD_MAX(PA1_RG_INTR_CAL);
+		break;
+
+	case U2P_DISCTH:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
+		max = FIELD_MAX(PA6_RG_U2_DISCTH);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
+		max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u2_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u2_phy_params_show, inode->i_private);
+}
+
+static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val);
+		break;
+
+	case U2P_EYE_TERM:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc)
+			mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1,
+					     MR1_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U2P_EFUSE_INTR:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val);
+		break;
+
+	case U2P_DISCTH:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u2_phy_fops = {
+	.open = u2_phy_params_open,
+	.write = u2_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u2_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u2_phy_files[i], 0644, inst->dbgfs, inst, &u2_phy_fops);
+}
+
+static int u3_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	u32 val = 0;
+	u32 max = 0;
+	u32 tmp;
+	int ret;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
+		val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
+		max = 1;
+		break;
+
+	case U3P_EFUSE_INTR:
+		tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+		val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
+		max = FIELD_MAX(P3A_RG_IEXT_INTR);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+		val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+		val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_RX_IMPEL);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u3_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u3_phy_params_show, inode->i_private);
+}
+
+static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	void __iomem *phyd = u3_banks->phyd;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
+				     P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U3P_EFUSE_INTR:
+		mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR, val);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u3_phy_fops = {
+	.open = u3_phy_params_open,
+	.write = u3_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u3_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u3_phy_files[i], 0644, inst->dbgfs, inst, &u3_phy_fops);
+}
+
+static int tphy_type_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *type;
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		type = "USB2";
+		break;
+	case PHY_TYPE_USB3:
+		type = "USB3";
+		break;
+	case PHY_TYPE_PCIE:
+		type = "PCIe";
+		break;
+	case PHY_TYPE_SGMII:
+		type = "SGMII";
+		break;
+	case PHY_TYPE_SATA:
+		type = "SATA";
+		break;
+	default:
+		type = "";
+	}
+
+	seq_printf(sf, "%s\n", type);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(tphy_type);
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{
+	char name[16];
+
+	snprintf(name, sizeof(name) - 1, "phy.%d", inst->index);
+	inst->dbgfs = debugfs_create_dir(name, tphy->dbgfs_root);
+
+	debugfs_create_file("type", 0444, inst->dbgfs, inst, &tphy_type_fops);
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		u2_phy_dbgfs_files_create(inst);
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		u3_phy_dbgfs_files_create(inst);
+		break;
+	default:
+		break;
+	}
+}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{
+	debugfs_remove_recursive(inst->dbgfs);
+	inst->dbgfs = NULL;
+}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{
+	tphy->dbgfs_root = debugfs_create_dir(dev_name(tphy->dev), phy_debug_root);
+}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{
+	debugfs_remove_recursive(tphy->dbgfs_root);
+	tphy->dbgfs_root = NULL;
+}
+
+#else
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{}
+
+#endif
+
 static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
 	struct mtk_phy_instance *instance)
 {
@@ -1032,6 +1417,8 @@ static int mtk_phy_init(struct phy *phy)
 		return -EINVAL;
 	}
 
+	tphy_debugfs_init(tphy, instance);
+
 	return 0;
 }
 
@@ -1068,6 +1455,8 @@ static int mtk_phy_exit(struct phy *phy)
 	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
 	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
 
+	tphy_debugfs_exit(instance);
+
 	if (instance->type == PHY_TYPE_USB2)
 		u2_phy_instance_exit(tphy, instance);
 
@@ -1295,15 +1684,29 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 	}
 
 	provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
+	if (IS_ERR(provider))
+		return dev_err_probe(dev, PTR_ERR(provider), "probe failed\n");
+
+	tphy_debugfs_root_create(tphy);
+	return 0;
 
-	return PTR_ERR_OR_ZERO(provider);
 put_child:
 	of_node_put(child_np);
 	return retval;
 }
 
+static int mtk_tphy_remove(struct platform_device *pdev)
+{
+	struct mtk_tphy *tphy;
+
+	tphy = platform_get_drvdata(pdev);
+	tphy_debugfs_root_remove(tphy);
+	return 0;
+}
+
 static struct platform_driver mtk_tphy_driver = {
 	.probe		= mtk_tphy_probe,
+	.remove		= mtk_tphy_remove,
 	.driver		= {
 		.name	= "mtk-tphy",
 		.of_match_table = mtk_tphy_id_table,
-- 
2.18.0


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
To: Vinod Koul <vkoul@kernel.org>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Nathan Chancellor <nathan@kernel.org>,
	Nick Desaulniers <ndesaulniers@google.com>,
	Tom Rix <trix@redhat.com>,
	AngeloGioacchino Del Regno
	<angelogioacchino.delregno@collabora.com>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-phy@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<llvm@lists.linux.dev>, Eddie Hung <eddie.hung@mediatek.com>,
	Tianping Fang <tianping.fang@mediatek.com>
Subject: [PATCH v4 3/3] phy: mediatek: tphy: add debugfs files
Date: Thu, 10 Nov 2022 21:27:16 +0800	[thread overview]
Message-ID: <20221110132716.12294-3-chunfeng.yun@mediatek.com> (raw)
In-Reply-To: <20221110132716.12294-1-chunfeng.yun@mediatek.com>

These debugfs files are mainly used to make eye diagram test easier,
especially helpful to do HQA test for a new IC without efuse enabled.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v4: fix build warning of sometimes uninitialized variable

v3: fix typo of "debugfs" suggested by AngeloGioacchino

v2: add CONFIG_PHY_MTK_TPHY_DEBUGFS suggested by AngeloGioacchino
---
 drivers/phy/mediatek/Kconfig        |   5 +
 drivers/phy/mediatek/phy-mtk-tphy.c | 405 +++++++++++++++++++++++++++-
 2 files changed, 409 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 3125ecb5d119..e9fdfe9f519f 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -27,6 +27,11 @@ config PHY_MTK_TPHY
 	  multi-ports is first version, otherwise is second version,
 	  so you can easily distinguish them by banks layout.
 
+config PHY_MTK_TPHY_DEBUGFS
+	bool "Add T-PHY Debugfs Files"
+	help
+	  Say Y here to add debugfs files mainly for T-PHY HQA test.
+
 config PHY_MTK_UFS
 	tristate "MediaTek UFS M-PHY driver"
 	depends on ARCH_MEDIATEK || COMPILE_TEST
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index e906a82791bd..f220a9a409bf 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/phy/phy.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/iopoll.h>
 #include <linux/mfd/syscon.h>
@@ -264,6 +265,8 @@
 
 #define TPHY_CLKS_CNT	2
 
+#define USER_BUF_LEN(count) min_t(size_t, 8, (count))
+
 enum mtk_phy_version {
 	MTK_PHY_V1 = 1,
 	MTK_PHY_V2,
@@ -310,6 +313,7 @@ struct mtk_phy_instance {
 	struct clk_bulk_data clks[TPHY_CLKS_CNT];
 	u32 index;
 	u32 type;
+	struct dentry *dbgfs;
 	struct regmap *type_sw;
 	u32 type_sw_reg;
 	u32 type_sw_index;
@@ -332,10 +336,391 @@ struct mtk_tphy {
 	const struct mtk_phy_pdata *pdata;
 	struct mtk_phy_instance **phys;
 	int nphys;
+	struct dentry *dbgfs_root;
 	int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
 	int src_coef; /* coefficient for slew rate calibrate */
 };
 
+#if IS_ENABLED(CONFIG_PHY_MTK_TPHY_DEBUGFS)
+
+enum u2_phy_params {
+	U2P_EYE_VRT = 0,
+	U2P_EYE_TERM,
+	U2P_EFUSE_EN,
+	U2P_EFUSE_INTR,
+	U2P_DISCTH,
+	U2P_PRE_EMPHASIS,
+};
+
+enum u3_phy_params {
+	U3P_EFUSE_EN = 0,
+	U3P_EFUSE_INTR,
+	U3P_EFUSE_TX_IMP,
+	U3P_EFUSE_RX_IMP,
+};
+
+static const char *const u2_phy_files[] = {
+	[U2P_EYE_VRT] = "vrt",
+	[U2P_EYE_TERM] = "term",
+	[U2P_EFUSE_EN] = "efuse",
+	[U2P_EFUSE_INTR] = "intr",
+	[U2P_DISCTH] = "discth",
+	[U2P_PRE_EMPHASIS] = "preemph",
+};
+
+static const char *const u3_phy_files[] = {
+	[U3P_EFUSE_EN] = "efuse",
+	[U3P_EFUSE_INTR] = "intr",
+	[U3P_EFUSE_TX_IMP] = "tx-imp",
+	[U3P_EFUSE_RX_IMP] = "rx-imp",
+};
+
+static int u2_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	u32 max = 0;
+	u32 tmp = 0;
+	u32 val = 0;
+	int ret;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_VRT_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_VRT_SEL);
+		break;
+
+	case U2P_EYE_TERM:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_TERM_SEL, tmp);
+		max = FIELD_MAX(PA1_RG_TERM_SEL);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc) {
+			tmp = readl(u2_banks->misc + U3P_MISC_REG1);
+			max = 1;
+		}
+
+		val = !!(tmp & MR1_EFUSE_AUTO_LOAD_DIS);
+		break;
+
+	case U2P_EFUSE_INTR:
+		tmp = readl(com + U3P_USBPHYACR1);
+		val = FIELD_GET(PA1_RG_INTR_CAL, tmp);
+		max = FIELD_MAX(PA1_RG_INTR_CAL);
+		break;
+
+	case U2P_DISCTH:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_DISCTH, tmp);
+		max = FIELD_MAX(PA6_RG_U2_DISCTH);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		tmp = readl(com + U3P_USBPHYACR6);
+		val = FIELD_GET(PA6_RG_U2_PRE_EMP, tmp);
+		max = FIELD_MAX(PA6_RG_U2_PRE_EMP);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u2_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u2_phy_params_show, inode->i_private);
+}
+
+static ssize_t u2_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u2phy_banks *u2_banks = &inst->u2_banks;
+	void __iomem *com = u2_banks->com;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u2_phy_files, ARRAY_SIZE(u2_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U2P_EYE_VRT:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_VRT_SEL, val);
+		break;
+
+	case U2P_EYE_TERM:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_TERM_SEL, val);
+		break;
+
+	case U2P_EFUSE_EN:
+		if (u2_banks->misc)
+			mtk_phy_update_field(u2_banks->misc + U3P_MISC_REG1,
+					     MR1_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U2P_EFUSE_INTR:
+		mtk_phy_update_field(com + U3P_USBPHYACR1, PA1_RG_INTR_CAL, val);
+		break;
+
+	case U2P_DISCTH:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_DISCTH, val);
+		break;
+
+	case U2P_PRE_EMPHASIS:
+		mtk_phy_update_field(com + U3P_USBPHYACR6, PA6_RG_U2_PRE_EMP, val);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u2_phy_fops = {
+	.open = u2_phy_params_open,
+	.write = u2_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u2_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u2_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u2_phy_files[i], 0644, inst->dbgfs, inst, &u2_phy_fops);
+}
+
+static int u3_phy_params_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *fname = file_dentry(sf->file)->d_iname;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	u32 val = 0;
+	u32 max = 0;
+	u32 tmp;
+	int ret;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_RSV);
+		val = !!(tmp & P3D_RG_EFUSE_AUTO_LOAD_DIS);
+		max = 1;
+		break;
+
+	case U3P_EFUSE_INTR:
+		tmp = readl(u3_banks->phya + U3P_U3_PHYA_REG0);
+		val = FIELD_GET(P3A_RG_IEXT_INTR, tmp);
+		max = FIELD_MAX(P3A_RG_IEXT_INTR);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL0);
+		val = FIELD_GET(P3D_RG_TX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		tmp = readl(u3_banks->phyd + U3P_U3_PHYD_IMPCAL1);
+		val = FIELD_GET(P3D_RG_RX_IMPEL, tmp);
+		max = FIELD_MAX(P3D_RG_RX_IMPEL);
+		break;
+
+	default:
+		seq_printf(sf, "invalid, %d\n", ret);
+		break;
+	}
+
+	seq_printf(sf, "%s : %d [0, %d]\n", fname, val, max);
+
+	return 0;
+}
+
+static int u3_phy_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, u3_phy_params_show, inode->i_private);
+}
+
+static ssize_t u3_phy_params_write(struct file *file, const char __user *ubuf,
+				   size_t count, loff_t *ppos)
+{
+	const char *fname = file_dentry(file)->d_iname;
+	struct seq_file *sf = file->private_data;
+	struct mtk_phy_instance *inst = sf->private;
+	struct u3phy_banks *u3_banks = &inst->u3_banks;
+	void __iomem *phyd = u3_banks->phyd;
+	ssize_t rc;
+	u32 val;
+	int ret;
+
+	rc = kstrtouint_from_user(ubuf, USER_BUF_LEN(count), 0, &val);
+	if (rc)
+		return rc;
+
+	ret = match_string(u3_phy_files, ARRAY_SIZE(u3_phy_files), fname);
+	if (ret < 0)
+		return (ssize_t)ret;
+
+	switch (ret) {
+	case U3P_EFUSE_EN:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_RSV,
+				     P3D_RG_EFUSE_AUTO_LOAD_DIS, !!val);
+		break;
+
+	case U3P_EFUSE_INTR:
+		mtk_phy_update_field(u3_banks->phya + U3P_U3_PHYA_REG0, P3A_RG_IEXT_INTR, val);
+		break;
+
+	case U3P_EFUSE_TX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_TX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL0, P3D_RG_FORCE_TX_IMPEL);
+		break;
+
+	case U3P_EFUSE_RX_IMP:
+		mtk_phy_update_field(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_RX_IMPEL, val);
+		mtk_phy_set_bits(phyd + U3P_U3_PHYD_IMPCAL1, P3D_RG_FORCE_RX_IMPEL);
+		break;
+
+	default:
+		break;
+	}
+
+	return count;
+}
+
+static const struct file_operations u3_phy_fops = {
+	.open = u3_phy_params_open,
+	.write = u3_phy_params_write,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+};
+
+static void u3_phy_dbgfs_files_create(struct mtk_phy_instance *inst)
+{
+	u32 count = ARRAY_SIZE(u3_phy_files);
+	int i;
+
+	for (i = 0; i < count; i++)
+		debugfs_create_file(u3_phy_files[i], 0644, inst->dbgfs, inst, &u3_phy_fops);
+}
+
+static int tphy_type_show(struct seq_file *sf, void *unused)
+{
+	struct mtk_phy_instance *inst = sf->private;
+	const char *type;
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		type = "USB2";
+		break;
+	case PHY_TYPE_USB3:
+		type = "USB3";
+		break;
+	case PHY_TYPE_PCIE:
+		type = "PCIe";
+		break;
+	case PHY_TYPE_SGMII:
+		type = "SGMII";
+		break;
+	case PHY_TYPE_SATA:
+		type = "SATA";
+		break;
+	default:
+		type = "";
+	}
+
+	seq_printf(sf, "%s\n", type);
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(tphy_type);
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{
+	char name[16];
+
+	snprintf(name, sizeof(name) - 1, "phy.%d", inst->index);
+	inst->dbgfs = debugfs_create_dir(name, tphy->dbgfs_root);
+
+	debugfs_create_file("type", 0444, inst->dbgfs, inst, &tphy_type_fops);
+
+	switch (inst->type) {
+	case PHY_TYPE_USB2:
+		u2_phy_dbgfs_files_create(inst);
+		break;
+	case PHY_TYPE_USB3:
+	case PHY_TYPE_PCIE:
+		u3_phy_dbgfs_files_create(inst);
+		break;
+	default:
+		break;
+	}
+}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{
+	debugfs_remove_recursive(inst->dbgfs);
+	inst->dbgfs = NULL;
+}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{
+	tphy->dbgfs_root = debugfs_create_dir(dev_name(tphy->dev), phy_debug_root);
+}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{
+	debugfs_remove_recursive(tphy->dbgfs_root);
+	tphy->dbgfs_root = NULL;
+}
+
+#else
+
+static void tphy_debugfs_init(struct mtk_tphy *tphy, struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_exit(struct mtk_phy_instance *inst)
+{}
+
+static void tphy_debugfs_root_create(struct mtk_tphy *tphy)
+{}
+
+static void tphy_debugfs_root_remove(struct mtk_tphy *tphy)
+{}
+
+#endif
+
 static void hs_slew_rate_calibrate(struct mtk_tphy *tphy,
 	struct mtk_phy_instance *instance)
 {
@@ -1032,6 +1417,8 @@ static int mtk_phy_init(struct phy *phy)
 		return -EINVAL;
 	}
 
+	tphy_debugfs_init(tphy, instance);
+
 	return 0;
 }
 
@@ -1068,6 +1455,8 @@ static int mtk_phy_exit(struct phy *phy)
 	struct mtk_phy_instance *instance = phy_get_drvdata(phy);
 	struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
 
+	tphy_debugfs_exit(instance);
+
 	if (instance->type == PHY_TYPE_USB2)
 		u2_phy_instance_exit(tphy, instance);
 
@@ -1295,15 +1684,29 @@ static int mtk_tphy_probe(struct platform_device *pdev)
 	}
 
 	provider = devm_of_phy_provider_register(dev, mtk_phy_xlate);
+	if (IS_ERR(provider))
+		return dev_err_probe(dev, PTR_ERR(provider), "probe failed\n");
+
+	tphy_debugfs_root_create(tphy);
+	return 0;
 
-	return PTR_ERR_OR_ZERO(provider);
 put_child:
 	of_node_put(child_np);
 	return retval;
 }
 
+static int mtk_tphy_remove(struct platform_device *pdev)
+{
+	struct mtk_tphy *tphy;
+
+	tphy = platform_get_drvdata(pdev);
+	tphy_debugfs_root_remove(tphy);
+	return 0;
+}
+
 static struct platform_driver mtk_tphy_driver = {
 	.probe		= mtk_tphy_probe,
+	.remove		= mtk_tphy_remove,
 	.driver		= {
 		.name	= "mtk-tphy",
 		.of_match_table = mtk_tphy_id_table,
-- 
2.18.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-11-10 13:27 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-10 13:27 [PATCH v4 1/3] phy: mediatek: fix build warning caused by clang for powerpc Chunfeng Yun
2022-11-10 13:27 ` Chunfeng Yun
2022-11-10 13:27 ` Chunfeng Yun
2022-11-10 13:27 ` [PATCH v4 2/3] phy: core: add debugfs root Chunfeng Yun
2022-11-10 13:27   ` Chunfeng Yun
2022-11-10 13:27   ` Chunfeng Yun
2022-11-24 17:39   ` Vinod Koul
2022-11-24 17:39     ` Vinod Koul
2022-11-24 17:39     ` Vinod Koul
2022-11-28  7:00     ` Chunfeng Yun (云春峰)
2022-11-28  7:00       ` Chunfeng Yun (云春峰)
2022-11-28  7:00       ` Chunfeng Yun (云春峰)
2022-11-10 13:27 ` Chunfeng Yun [this message]
2022-11-10 13:27   ` [PATCH v4 3/3] phy: mediatek: tphy: add debugfs files Chunfeng Yun
2022-11-10 13:27   ` Chunfeng Yun
2022-11-24 17:47   ` Vinod Koul
2022-11-24 17:47     ` Vinod Koul
2022-11-24 17:47     ` Vinod Koul
2022-11-28  7:26     ` Chunfeng Yun (云春峰)
2022-11-28  7:26       ` Chunfeng Yun (云春峰)
2022-11-28  7:26       ` Chunfeng Yun (云春峰)
2022-11-28 14:00       ` Andrew Lunn
2022-11-28 14:00         ` Andrew Lunn
2022-11-28 14:00         ` Andrew Lunn
2022-12-03 14:53         ` Chunfeng Yun (云春峰)
2022-12-03 14:53           ` Chunfeng Yun (云春峰)
2022-12-03 14:53           ` Chunfeng Yun (云春峰)
2022-12-03 15:38           ` Andrew Lunn
2022-12-03 15:38             ` Andrew Lunn
2022-12-03 15:38             ` Andrew Lunn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221110132716.12294-3-chunfeng.yun@mediatek.com \
    --to=chunfeng.yun@mediatek.com \
    --cc=angelogioacchino.delregno@collabora.com \
    --cc=eddie.hung@mediatek.com \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=llvm@lists.linux.dev \
    --cc=matthias.bgg@gmail.com \
    --cc=nathan@kernel.org \
    --cc=ndesaulniers@google.com \
    --cc=tianping.fang@mediatek.com \
    --cc=trix@redhat.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.