All of lore.kernel.org
 help / color / mirror / Atom feed
From: Yinbo Zhu <zhuyinbo@loongson.cn>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Arnd Bergmann <arnd@arndb.de>, Hector Martin <marcan@marcan.st>,
	Lubomir Rintel <lkundrak@v3.sk>,
	Conor Dooley <conor.dooley@microchip.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Hitomi Hasegawa <hasegawa-hitomi@fujitsu.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Brian Norris <briannorris@chromium.org>,
	Sven Peter <sven@svenpeter.dev>,
	loongarch@lists.linux.dev, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, soc@kernel.org,
	Yinbo Zhu <zhuyinbo@loongson.cn>
Subject: [PATCH v7 1/2] soc: loongson: add GUTS driver for loongson-2 platforms
Date: Fri, 11 Nov 2022 13:42:00 +0800	[thread overview]
Message-ID: <20221111054201.18528-1-zhuyinbo@loongson.cn> (raw)

The global utilities block controls PCIE device enabling, alternate
function selection for multiplexed signals, consistency of HDA, USB
and PCIE, configuration of memory controller, rtc controller, lio
controller, and clock control.

This patch adds a driver to manage and access global utilities block
for LoongArch architecture Loongson-2 SoCs. Initially only reading SVR
and registering soc device are supported. Other guts accesses, such
as reading firmware configuration by default, should eventually be
added into this driver as well.

Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
---
Change in v7:
		1. Replace LA/loongarch with LoongArch.
		2. Replace PMON with firmware.
		3. Add MODULE_LICENSE and MODULE_DESCRIPTION in driver ending.
Change in v6:
		1. Add full name spelling about GUTS in Kconfig.
		2. Add reviewed-by information.
Change in v5:
		1. Add all history change log information.
Change in v4:
		1. Remove menu information in Kconfig.
Change in v3:
		1. Replace string loongson2/Loongson2 with Loongson-2/loongson-2
	           in commit message, Kconfig, Makefile file.
		2. Replace string LOONGSON2 with LOONGSON-2.
Change in v2:
		1. Add architecture support commit log description.
		2. Add other guts accesses plan commit log description.
		3. Add "depends on LOONGARCH || COMPILE_TEST" for
		   LOONGSON2_GUTS in Kconfig.
		4. Move the scfg_guts to .c file from .h and delete .h.
		5. Remove __packed on scfg_guts.

 MAINTAINERS                           |   6 +
 drivers/soc/Kconfig                   |   1 +
 drivers/soc/Makefile                  |   1 +
 drivers/soc/loongson/Kconfig          |  18 +++
 drivers/soc/loongson/Makefile         |   6 +
 drivers/soc/loongson/loongson2_guts.c | 192 ++++++++++++++++++++++++++
 6 files changed, 224 insertions(+)
 create mode 100644 drivers/soc/loongson/Kconfig
 create mode 100644 drivers/soc/loongson/Makefile
 create mode 100644 drivers/soc/loongson/loongson2_guts.c

diff --git a/MAINTAINERS b/MAINTAINERS
index c4fc50eb260b..99aa2cb9c80a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12044,6 +12044,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pinctrl/loongson,ls2k-pinctrl.yaml
 F:	drivers/pinctrl/pinctrl-loongson2.c
 
+LOONGSON-2 SOC SERIES GUTS DRIVER
+M:	Yinbo Zhu <zhuyinbo@loongson.cn>
+L:	loongarch@lists.linux.dev
+S:	Maintained
+F:	drivers/soc/loongson/loongson2_guts.c
+
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
 M:	Sathya Prakash <sathya.prakash@broadcom.com>
 M:	Sreekanth Reddy <sreekanth.reddy@broadcom.com>
diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
index e461c071189b..5dbb09f843f7 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -13,6 +13,7 @@ source "drivers/soc/fujitsu/Kconfig"
 source "drivers/soc/imx/Kconfig"
 source "drivers/soc/ixp4xx/Kconfig"
 source "drivers/soc/litex/Kconfig"
+source "drivers/soc/loongson/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/microchip/Kconfig"
 source "drivers/soc/pxa/Kconfig"
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 69ba6508cf2c..fff513bd522d 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -18,6 +18,7 @@ obj-y				+= imx/
 obj-y				+= ixp4xx/
 obj-$(CONFIG_SOC_XWAY)		+= lantiq/
 obj-$(CONFIG_LITEX_SOC_CONTROLLER) += litex/
+obj-y				+= loongson/
 obj-y				+= mediatek/
 obj-y				+= microchip/
 obj-y				+= pxa/
diff --git a/drivers/soc/loongson/Kconfig b/drivers/soc/loongson/Kconfig
new file mode 100644
index 000000000000..707f56358dc4
--- /dev/null
+++ b/drivers/soc/loongson/Kconfig
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Loongson-2 series SoC drivers
+#
+
+config LOONGSON2_GUTS
+	tristate "Loongson-2 SoC Global UtiliTieS (GUTS) register block"
+	depends on LOONGARCH || COMPILE_TEST
+	select SOC_BUS
+	help
+	 The global utilities block controls PCIE device enabling, alternate
+	 function selection for multiplexed signals, consistency of HDA, USB
+	 and PCIE, configuration of memory controller, rtc controller, lio
+	 controller, and clock control. This patch adds a driver to manage
+	 and access global utilities block for LoongArch architecture Loongson-2
+	 SoCs. Initially only reading SVR and registering soc device are
+	 supported. Other guts accesses, such as reading firmware configuration
+	 by default, should eventually be added into this driver as well.
diff --git a/drivers/soc/loongson/Makefile b/drivers/soc/loongson/Makefile
new file mode 100644
index 000000000000..263c486df638
--- /dev/null
+++ b/drivers/soc/loongson/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Makefile for the Linux Kernel SoC Loongson-2 specific device drivers
+#
+
+obj-$(CONFIG_LOONGSON2_GUTS)		+= loongson2_guts.o
diff --git a/drivers/soc/loongson/loongson2_guts.c b/drivers/soc/loongson/loongson2_guts.c
new file mode 100644
index 000000000000..bace4bc8e03b
--- /dev/null
+++ b/drivers/soc/loongson/loongson2_guts.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Author: Yinbo Zhu <zhuyinbo@loongson.cn>
+ * Copyright (C) 2022-2023 Loongson Technology Corporation Limited
+ */
+
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/of_fdt.h>
+#include <linux/sys_soc.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+static struct soc_device_attribute soc_dev_attr;
+static struct soc_device *soc_dev;
+
+/*
+ * Global Utility Registers.
+ *
+ * Not all registers defined in this structure are available on all chips, so
+ * you are expected to know whether a given register actually exists on your
+ * chip before you access it.
+ *
+ * Also, some registers are similar on different chips but have slightly
+ * different names.  In these cases, one name is chosen to avoid extraneous
+ * #ifdefs.
+ */
+struct scfg_guts {
+	u32     svr;            /* Version Register */
+	u8      res0[4];
+	u16     feature;        /* Feature Register */
+	u32     vendor;         /* Vendor Register */
+	u8      res1[6];
+	u32     id;
+	u8      res2[0x3ff8 - 0x18];
+	u32     chip;
+};
+
+static struct guts {
+	struct scfg_guts __iomem *regs;
+	bool little_endian;
+} *guts;
+
+struct loongson2_soc_die_attr {
+	char	*die;
+	u32	svr;
+	u32	mask;
+};
+
+/* SoC die attribute definition for Loongson-2 platform */
+static const struct loongson2_soc_die_attr loongson2_soc_die[] = {
+
+	/*
+	 * LoongArch-based SoCs Loongson-2 Series
+	 */
+
+	/* Die: 2k1000, SoC: 2k1000 */
+	{ .die		= "2K1000",
+	  .svr		= 0x00000013,
+	  .mask		= 0x000000ff,
+	},
+	{ },
+};
+
+static const struct loongson2_soc_die_attr *loongson2_soc_die_match(
+	u32 svr, const struct loongson2_soc_die_attr *matches)
+{
+	while (matches->svr) {
+		if (matches->svr == (svr & matches->mask))
+			return matches;
+		matches++;
+	};
+
+	return NULL;
+}
+
+static u32 loongson2_guts_get_svr(void)
+{
+	u32 svr = 0;
+
+	if (!guts || !guts->regs)
+		return svr;
+
+	if (guts->little_endian)
+		svr = ioread32(&guts->regs->svr);
+	else
+		svr = ioread32be(&guts->regs->svr);
+
+	return svr;
+}
+
+static int loongson2_guts_probe(struct platform_device *pdev)
+{
+	struct device_node *root, *np = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	const struct loongson2_soc_die_attr *soc_die;
+	const char *machine;
+	u32 svr;
+
+	/* Initialize guts */
+	guts = devm_kzalloc(dev, sizeof(*guts), GFP_KERNEL);
+	if (!guts)
+		return -ENOMEM;
+
+	guts->little_endian = of_property_read_bool(np, "little-endian");
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	guts->regs = ioremap(res->start, res->end - res->start + 1);
+	if (IS_ERR(guts->regs))
+		return PTR_ERR(guts->regs);
+
+	/* Register soc device */
+	root = of_find_node_by_path("/");
+	if (of_property_read_string(root, "model", &machine))
+		of_property_read_string_index(root, "compatible", 0, &machine);
+	of_node_put(root);
+	if (machine)
+		soc_dev_attr.machine = devm_kstrdup(dev, machine, GFP_KERNEL);
+
+	svr = loongson2_guts_get_svr();
+	soc_die = loongson2_soc_die_match(svr, loongson2_soc_die);
+	if (soc_die) {
+		soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL,
+						     "Loongson %s", soc_die->die);
+	} else {
+		soc_dev_attr.family = devm_kasprintf(dev, GFP_KERNEL, "Loongson");
+	}
+	if (!soc_dev_attr.family)
+		return -ENOMEM;
+	soc_dev_attr.soc_id = devm_kasprintf(dev, GFP_KERNEL,
+					     "svr:0x%08x", svr);
+	if (!soc_dev_attr.soc_id)
+		return -ENOMEM;
+	soc_dev_attr.revision = devm_kasprintf(dev, GFP_KERNEL, "%d.%d",
+					       (svr >>  4) & 0xf, svr & 0xf);
+	if (!soc_dev_attr.revision)
+		return -ENOMEM;
+
+	soc_dev = soc_device_register(&soc_dev_attr);
+	if (IS_ERR(soc_dev))
+		return PTR_ERR(soc_dev);
+
+	pr_info("Machine: %s\n", soc_dev_attr.machine);
+	pr_info("SoC family: %s\n", soc_dev_attr.family);
+	pr_info("SoC ID: %s, Revision: %s\n",
+		soc_dev_attr.soc_id, soc_dev_attr.revision);
+
+	return 0;
+}
+
+static int loongson2_guts_remove(struct platform_device *dev)
+{
+	soc_device_unregister(soc_dev);
+
+	return 0;
+}
+
+/*
+ * Table for matching compatible strings, for device tree
+ * guts node, for Loongson-2 SoCs.
+ */
+static const struct of_device_id loongson2_guts_of_match[] = {
+	{ .compatible = "loongson,ls2k-chipid", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, loongson2_guts_of_match);
+
+static struct platform_driver loongson2_guts_driver = {
+	.driver = {
+		.name = "loongson2-guts",
+		.of_match_table = loongson2_guts_of_match,
+	},
+	.probe = loongson2_guts_probe,
+	.remove = loongson2_guts_remove,
+};
+
+static int __init loongson2_guts_init(void)
+{
+	return platform_driver_register(&loongson2_guts_driver);
+}
+core_initcall(loongson2_guts_init);
+
+static void __exit loongson2_guts_exit(void)
+{
+	platform_driver_unregister(&loongson2_guts_driver);
+}
+module_exit(loongson2_guts_exit);
+
+MODULE_DESCRIPTION("Loongson2 GUTS driver");
+MODULE_LICENSE("GPL");
-- 
2.20.1


             reply	other threads:[~2022-11-11  5:42 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-11  5:42 Yinbo Zhu [this message]
2022-11-11  5:42 ` [PATCH v7 2/2] dt-bindings: soc: add loongson-2 chipid Yinbo Zhu
2022-11-14 15:30 ` [PATCH v7 1/2] soc: loongson: add GUTS driver for loongson-2 platforms patchwork-bot+linux-soc
2022-11-14 15:37   ` Arnd Bergmann
2022-11-15  1:11     ` Yinbo Zhu
2022-11-15  1:16     ` Yinbo Zhu
2022-11-15  2:59     ` Yinbo Zhu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221111054201.18528-1-zhuyinbo@loongson.cn \
    --to=zhuyinbo@loongson.cn \
    --cc=arnd@arndb.de \
    --cc=briannorris@chromium.org \
    --cc=conor.dooley@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hasegawa-hitomi@fujitsu.com \
    --cc=heiko@sntech.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lkundrak@v3.sk \
    --cc=loongarch@lists.linux.dev \
    --cc=marcan@marcan.st \
    --cc=robh+dt@kernel.org \
    --cc=soc@kernel.org \
    --cc=sven@svenpeter.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.