All of lore.kernel.org
 help / color / mirror / Atom feed
From: Luca Weiss <luca@z3ntu.xyz>
To: linux-arm-msm@vger.kernel.org
Cc: ~postmarketos/upstreaming@lists.sr.ht,
	phone-devel@vger.kernel.org,
	Gabriela David <ultracoolguy@disroot.org>,
	Luca Weiss <luca@z3ntu.xyz>, Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Kees Cook <keescook@chromium.org>,
	Tony Luck <tony.luck@intel.com>,
	"Guilherme G. Piccoli" <gpiccoli@igalia.com>,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-hardening@vger.kernel.org
Subject: [PATCH v2 9/9] arm64: dts: qcom: sdm632: Add device tree for Motorola G7 Power
Date: Sat, 19 Nov 2022 21:37:50 +0100	[thread overview]
Message-ID: <20221119203758.888207-10-luca@z3ntu.xyz> (raw)
In-Reply-To: <20221119203758.888207-1-luca@z3ntu.xyz>

From: Gabriela David <ultracoolguy@disroot.org>

Add device tree for the Motorola G7 Power (ocean) smartphone. This
device is based on Snapdragon 632 (sdm632) SoC which is a variant of
MSM8953.

Signed-off-by: Gabriela David <ultracoolguy@disroot.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
Changes in v2:
* address review comments from v1

 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/sdm632-motorola-ocean.dts   | 291 ++++++++++++++++++
 2 files changed, 292 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 817738043ebd..dda4bd773142 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -131,6 +131,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-discovery.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-pioneer.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm630-sony-xperia-nile-voyager.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-fairphone-fp3.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
new file mode 100644
index 000000000000..380a0c49a141
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Gabriela David
+ */
+/dts-v1/;
+
+#include "sdm632.dtsi"
+#include "pm8953.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Motorola G7 Power";
+	compatible = "motorola,ocean", "qcom,sdm632";
+	chassis-type = "handset";
+	qcom,msm-id = <349 0>;
+	qcom,board-id = <0x141 0xc100>;
+	qcom,pmic-id = <0x10016 0x25 0x00 0x00>;
+
+	backlight: backlight {
+		compatible = "led-backlight";
+		leds = <&led>;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (720 * 1520 * 3)>;
+
+			width = <720>;
+			height = <1520>;
+			stride = <(720 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_key_default>;
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84300000 {
+			reg = <0x0 0x84300000 0x0 0x2000000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>;
+			no-map;
+		};
+
+		reserved@eefa1800 {
+			reg = <0x00 0xeefa1800 0x00 0x5e800>;
+			no-map;
+		};
+
+		ramoops@ef000000 {
+			compatible = "ramoops";
+			reg = <0x0 0xef000000 0x0 0xbf800>;
+			console-size = <0x40000>;
+			pmsg-size = <0x40000>;
+			record-size = <0x3f800>;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&i2c_3 {
+	status = "okay";
+
+	touchscreen@41 {
+		compatible = "ilitek,ili2117";
+		reg = <0x41>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-inverted-x;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	led-controller@36 {
+		compatible = "ti,lm3697";
+		reg = <0x36>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led: led@1 {
+			reg = <1>;
+			default-trigger = "backlight";
+			function = LED_FUNCTION_BACKLIGHT;
+			led-sources = <0 1 2>;
+		};
+	};
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <984000>;
+			regulator-max-microvolt = <1240000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1036000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1175000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l18: l18 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-always-on;
+			regulator-boot-on;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <96 4>;
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
-- 
2.38.1


  parent reply	other threads:[~2022-11-19 20:39 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-19 20:37 [PATCH v2 0/9] Add a bunch of msm8953 dts files Luca Weiss
2022-11-19 20:37 ` [PATCH v2 1/9] dt-bindings: arm: qcom: document new msm8953-family devices Luca Weiss
2022-11-21  9:15   ` Krzysztof Kozlowski
2022-11-19 20:37 ` [PATCH v2 2/9] arm64: dts: qcom: msm8953: Adjust reserved-memory nodes Luca Weiss
2022-11-21 11:15   ` Konrad Dybcio
2022-11-19 20:37 ` [PATCH v2 3/9] arm64: dts: qcom: sdm450: Add device tree for Motorola Moto G6 Luca Weiss
2022-11-21 11:16   ` Konrad Dybcio
2022-11-19 20:37 ` [PATCH v2 4/9] arm64: dts: qcom: msm8953: Add device tree for Motorola G5 Plus Luca Weiss
2022-11-21 11:17   ` Konrad Dybcio
2022-11-19 20:37 ` [PATCH v2 5/9] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Mi A2 Lite Luca Weiss
2022-11-21 11:17   ` Konrad Dybcio
2022-11-19 20:37 ` [PATCH v2 6/9] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi Note 4X Luca Weiss
2022-11-21 11:18   ` Konrad Dybcio
2022-11-19 20:37 ` [PATCH v2 7/9] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Mi A1 Luca Weiss
2022-11-21 11:18   ` Konrad Dybcio
2022-11-19 20:37 ` [PATCH v2 8/9] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi 5 Plus Luca Weiss
2022-11-21 11:19   ` Konrad Dybcio
2022-11-19 20:37 ` Luca Weiss [this message]
2022-11-21 11:20   ` [PATCH v2 9/9] arm64: dts: qcom: sdm632: Add device tree for Motorola G7 Power Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221119203758.888207-10-luca@z3ntu.xyz \
    --to=luca@z3ntu.xyz \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gpiccoli@igalia.com \
    --cc=keescook@chromium.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-hardening@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=phone-devel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tony.luck@intel.com \
    --cc=ultracoolguy@disroot.org \
    --cc=~postmarketos/upstreaming@lists.sr.ht \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.