All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jiantao Zhang <water.zhangjiantao@huawei.com>
To: <gregkh@linuxfoundation.org>, <stern@rowland.harvard.edu>,
	<jakobkoschel@gmail.com>, <geert+renesas@glider.be>,
	<water.zhangjiantao@huawei.com>, <colin.i.king@gmail.com>,
	<xuetao09@huawei.com>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Cc: <caiyadong@huawei.com>, <xuhaiyang5@hisilicon.com>
Subject: [PATCH v4] USB: gadget: Fix use-after-free during usb config switch
Date: Mon, 21 Nov 2022 13:08:05 +0000	[thread overview]
Message-ID: <20221121130805.10735-1-water.zhangjiantao@huawei.com> (raw)

In the process of switching USB config from rndis to other config,
if the hardware does not support the ->pullup callback, or the
hardware encounters a low probability fault, both of them may cause
the ->pullup callback to fail, which will then cause a system panic
(use after free).

The gadget drivers sometimes need to be unloaded regardless of the
hardware's behavior.

Analysis as follows:
=======================================================================
(1) write /config/usb_gadget/g1/UDC "none"

gether_disconnect+0x2c/0x1f8
rndis_disable+0x4c/0x74
composite_disconnect+0x74/0xb0
configfs_composite_disconnect+0x60/0x7c
usb_gadget_disconnect+0x70/0x124
usb_gadget_unregister_driver+0xc8/0x1d8
gadget_dev_desc_UDC_store+0xec/0x1e4

(2) rm /config/usb_gadget/g1/configs/b.1/f1

rndis_deregister+0x28/0x54
rndis_free+0x44/0x7c
usb_put_function+0x14/0x1c
config_usb_cfg_unlink+0xc4/0xe0
configfs_unlink+0x124/0x1c8
vfs_unlink+0x114/0x1dc

(3) rmdir /config/usb_gadget/g1/functions/rndis.gs4

panic+0x1fc/0x3d0
do_page_fault+0xa8/0x46c
do_mem_abort+0x3c/0xac
el1_sync_handler+0x40/0x78
0xffffff801138f880
rndis_close+0x28/0x34
eth_stop+0x74/0x110
dev_close_many+0x48/0x194
rollback_registered_many+0x118/0x814
unregister_netdev+0x20/0x30
gether_cleanup+0x1c/0x38
rndis_attr_release+0xc/0x14
kref_put+0x74/0xb8
configfs_rmdir+0x314/0x374

If gadget->ops->pullup() return an error, function rndis_close() will be
called, then it will causes a use-after-free problem.
=======================================================================

Fixes: 0a55187a1ec8 ("USB: gadget core: Issue ->disconnect() callback from usb_gadget_disconnect()")
Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
Signed-off-by: TaoXue <xuetao09@huawei.com>
---
V3 -> V4: Solved format and mailbox configuration issues.
V2 -> V3: Solved the format issues of Fixes and backtraces.
V1 -> V2: V1 will affect the original function, V2 just move 
the callback after "if" statement, so that the original function 
will not be affected. And fixed formatting issues.

 drivers/usb/gadget/udc/core.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index c63c0c2cf649..bf9878e1a72a 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -734,13 +734,13 @@ int usb_gadget_disconnect(struct usb_gadget *gadget)
 	}
 
 	ret = gadget->ops->pullup(gadget, 0);
-	if (!ret) {
+	if (!ret)
 		gadget->connected = 0;
-		mutex_lock(&udc_lock);
-		if (gadget->udc->driver)
-			gadget->udc->driver->disconnect(gadget);
-		mutex_unlock(&udc_lock);
-	}
+
+	mutex_lock(&udc_lock);
+	if (gadget->udc->driver)
+		gadget->udc->driver->disconnect(gadget);
+	mutex_unlock(&udc_lock);
 
 out:
 	trace_usb_gadget_disconnect(gadget, ret);
-- 
2.17.1


                 reply	other threads:[~2022-11-21 13:08 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221121130805.10735-1-water.zhangjiantao@huawei.com \
    --to=water.zhangjiantao@huawei.com \
    --cc=caiyadong@huawei.com \
    --cc=colin.i.king@gmail.com \
    --cc=geert+renesas@glider.be \
    --cc=gregkh@linuxfoundation.org \
    --cc=jakobkoschel@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=xuetao09@huawei.com \
    --cc=xuhaiyang5@hisilicon.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.