From: Michael Walle <michael@walle.cc> To: Jonathan Corbet <corbet@lwn.net>, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, Miquel Raynal <miquel.raynal@bootlin.com>, Rob Herring <robh+dt@kernel.org>, Frank Rowand <frowand.list@gmail.com>, Sascha Hauer <s.hauer@pengutronix.de> Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Michael Walle <michael@walle.cc> Subject: [PATCH v4 09/20] nvmem: core: add nvmem_add_one_cell() Date: Wed, 23 Nov 2022 19:01:40 +0100 [thread overview] Message-ID: <20221123180151.2160033-10-michael@walle.cc> (raw) In-Reply-To: <20221123180151.2160033-1-michael@walle.cc> Add a new function to add exactly one cell. This will be used by the nvmem layout drivers to add custom cells. In contrast to the nvmem_add_cells(), this has the advantage that we don't have to assemble a list of cells on runtime. Signed-off-by: Michael Walle <michael@walle.cc> --- changes since v3: - none changes since v2: - add EXPORT_SYMBOL_GPL() changes since v1: - none drivers/nvmem/core.c | 59 ++++++++++++++++++++-------------- include/linux/nvmem-provider.h | 8 +++++ 2 files changed, 43 insertions(+), 24 deletions(-) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 7c76e0e0072e..cb25bf29dea7 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -501,6 +501,36 @@ static int nvmem_cell_info_to_nvmem_cell_entry(struct nvmem_device *nvmem, return 0; } +/** + * nvmem_add_one_cell() - Add one cell information to an nvmem device + * + * @nvmem: nvmem device to add cells to. + * @info: nvmem cell info to add to the device + * + * Return: 0 or negative error code on failure. + */ +int nvmem_add_one_cell(struct nvmem_device *nvmem, + const struct nvmem_cell_info *info) +{ + struct nvmem_cell_entry *cell; + int rval; + + cell = kzalloc(sizeof(*cell), GFP_KERNEL); + if (!cell) + return -ENOMEM; + + rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, info, cell); + if (rval) { + kfree(cell); + return rval; + } + + nvmem_cell_entry_add(cell); + + return 0; +} +EXPORT_SYMBOL_GPL(nvmem_add_one_cell); + /** * nvmem_add_cells() - Add cell information to an nvmem device * @@ -514,34 +544,15 @@ static int nvmem_add_cells(struct nvmem_device *nvmem, const struct nvmem_cell_info *info, int ncells) { - struct nvmem_cell_entry **cells; - int i, rval = 0; - - cells = kcalloc(ncells, sizeof(*cells), GFP_KERNEL); - if (!cells) - return -ENOMEM; + int i, rval; for (i = 0; i < ncells; i++) { - cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL); - if (!cells[i]) { - rval = -ENOMEM; - goto out; - } - - rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, &info[i], cells[i]); - if (rval) { - kfree(cells[i]); - goto out; - } - - nvmem_cell_entry_add(cells[i]); + rval = nvmem_add_one_cell(nvmem, &info[i]); + if (rval) + return rval; } -out: - /* remove tmp array */ - kfree(cells); - - return rval; + return 0; } /** diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h index 14a32a1bc249..385d29168008 100644 --- a/include/linux/nvmem-provider.h +++ b/include/linux/nvmem-provider.h @@ -155,6 +155,9 @@ struct nvmem_device *devm_nvmem_register(struct device *dev, void nvmem_add_cell_table(struct nvmem_cell_table *table); void nvmem_del_cell_table(struct nvmem_cell_table *table); +int nvmem_add_one_cell(struct nvmem_device *nvmem, + const struct nvmem_cell_info *info); + #else static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c) @@ -172,6 +175,11 @@ devm_nvmem_register(struct device *dev, const struct nvmem_config *c) static inline void nvmem_add_cell_table(struct nvmem_cell_table *table) {} static inline void nvmem_del_cell_table(struct nvmem_cell_table *table) {} +static inline int nvmem_add_one_cell(struct nvmem_device *nvmem, + const struct nvmem_cell_info *info) +{ + return -EOPNOTSUPP; +} #endif /* CONFIG_NVMEM */ #endif /* ifndef _LINUX_NVMEM_PROVIDER_H */ -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc> To: Jonathan Corbet <corbet@lwn.net>, Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, Miquel Raynal <miquel.raynal@bootlin.com>, Rob Herring <robh+dt@kernel.org>, Frank Rowand <frowand.list@gmail.com>, Sascha Hauer <s.hauer@pengutronix.de> Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Michael Walle <michael@walle.cc> Subject: [PATCH v4 09/20] nvmem: core: add nvmem_add_one_cell() Date: Wed, 23 Nov 2022 19:01:40 +0100 [thread overview] Message-ID: <20221123180151.2160033-10-michael@walle.cc> (raw) In-Reply-To: <20221123180151.2160033-1-michael@walle.cc> Add a new function to add exactly one cell. This will be used by the nvmem layout drivers to add custom cells. In contrast to the nvmem_add_cells(), this has the advantage that we don't have to assemble a list of cells on runtime. Signed-off-by: Michael Walle <michael@walle.cc> --- changes since v3: - none changes since v2: - add EXPORT_SYMBOL_GPL() changes since v1: - none drivers/nvmem/core.c | 59 ++++++++++++++++++++-------------- include/linux/nvmem-provider.h | 8 +++++ 2 files changed, 43 insertions(+), 24 deletions(-) diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c index 7c76e0e0072e..cb25bf29dea7 100644 --- a/drivers/nvmem/core.c +++ b/drivers/nvmem/core.c @@ -501,6 +501,36 @@ static int nvmem_cell_info_to_nvmem_cell_entry(struct nvmem_device *nvmem, return 0; } +/** + * nvmem_add_one_cell() - Add one cell information to an nvmem device + * + * @nvmem: nvmem device to add cells to. + * @info: nvmem cell info to add to the device + * + * Return: 0 or negative error code on failure. + */ +int nvmem_add_one_cell(struct nvmem_device *nvmem, + const struct nvmem_cell_info *info) +{ + struct nvmem_cell_entry *cell; + int rval; + + cell = kzalloc(sizeof(*cell), GFP_KERNEL); + if (!cell) + return -ENOMEM; + + rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, info, cell); + if (rval) { + kfree(cell); + return rval; + } + + nvmem_cell_entry_add(cell); + + return 0; +} +EXPORT_SYMBOL_GPL(nvmem_add_one_cell); + /** * nvmem_add_cells() - Add cell information to an nvmem device * @@ -514,34 +544,15 @@ static int nvmem_add_cells(struct nvmem_device *nvmem, const struct nvmem_cell_info *info, int ncells) { - struct nvmem_cell_entry **cells; - int i, rval = 0; - - cells = kcalloc(ncells, sizeof(*cells), GFP_KERNEL); - if (!cells) - return -ENOMEM; + int i, rval; for (i = 0; i < ncells; i++) { - cells[i] = kzalloc(sizeof(**cells), GFP_KERNEL); - if (!cells[i]) { - rval = -ENOMEM; - goto out; - } - - rval = nvmem_cell_info_to_nvmem_cell_entry(nvmem, &info[i], cells[i]); - if (rval) { - kfree(cells[i]); - goto out; - } - - nvmem_cell_entry_add(cells[i]); + rval = nvmem_add_one_cell(nvmem, &info[i]); + if (rval) + return rval; } -out: - /* remove tmp array */ - kfree(cells); - - return rval; + return 0; } /** diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h index 14a32a1bc249..385d29168008 100644 --- a/include/linux/nvmem-provider.h +++ b/include/linux/nvmem-provider.h @@ -155,6 +155,9 @@ struct nvmem_device *devm_nvmem_register(struct device *dev, void nvmem_add_cell_table(struct nvmem_cell_table *table); void nvmem_del_cell_table(struct nvmem_cell_table *table); +int nvmem_add_one_cell(struct nvmem_device *nvmem, + const struct nvmem_cell_info *info); + #else static inline struct nvmem_device *nvmem_register(const struct nvmem_config *c) @@ -172,6 +175,11 @@ devm_nvmem_register(struct device *dev, const struct nvmem_config *c) static inline void nvmem_add_cell_table(struct nvmem_cell_table *table) {} static inline void nvmem_del_cell_table(struct nvmem_cell_table *table) {} +static inline int nvmem_add_one_cell(struct nvmem_device *nvmem, + const struct nvmem_cell_info *info) +{ + return -EOPNOTSUPP; +} #endif /* CONFIG_NVMEM */ #endif /* ifndef _LINUX_NVMEM_PROVIDER_H */ -- 2.30.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-11-23 18:04 UTC|newest] Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-11-23 18:01 [PATCH v4 00/20] nvmem: core: introduce NVMEM layouts Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 01/20] net: add helper eth_addr_add() Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 02/20] of: base: add of_parse_phandle_with_optional_args() Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 03/20] of: property: make #.*-cells optional for simple props Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-30 0:45 ` Rob Herring 2022-11-30 0:45 ` Rob Herring 2022-11-23 18:01 ` [PATCH v4 04/20] of: property: add #nvmem-cell-cells property Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-30 0:45 ` Rob Herring 2022-11-30 0:45 ` Rob Herring 2022-11-23 18:01 ` [PATCH v4 05/20] nvmem: core: fix device node refcounting Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 06/20] nvmem: core: add an index parameter to the cell Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 07/20] nvmem: core: move struct nvmem_cell_info to nvmem-provider.h Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 08/20] nvmem: core: drop the removal of the cells in nvmem_add_cells() Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` Michael Walle [this message] 2022-11-23 18:01 ` [PATCH v4 09/20] nvmem: core: add nvmem_add_one_cell() Michael Walle 2022-11-23 18:01 ` [PATCH v4 10/20] nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 11/20] nvmem: core: introduce NVMEM layouts Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 12/20] nvmem: core: add per-cell post processing Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 13/20] nvmem: core: allow to modify a cell before adding it Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 14/20] nvmem: imx-ocotp: replace global post processing with layouts Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 15/20] nvmem: cell: drop global cell_post_process Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 16/20] nvmem: core: provide own priv pointer in post process callback Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 17/20] nvmem: layouts: add sl28vpd layout Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 18/20] MAINTAINERS: add myself as sl28vpd nvmem layout driver Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 19/20] nvmem: layouts: Add ONIE tlv " Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-11-23 18:01 ` [PATCH v4 20/20] MAINTAINERS: Add myself as ONIE tlv NVMEM layout maintainer Michael Walle 2022-11-23 18:01 ` Michael Walle 2022-12-02 16:45 [PATCH v4 10/20] nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of() kernel test robot 2022-12-03 8:30 ` Dan Carpenter 2022-12-03 8:30 ` Dan Carpenter 2022-12-05 8:45 ` Michael Walle 2022-12-05 8:45 ` Michael Walle
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221123180151.2160033-10-michael@walle.cc \ --to=michael@walle.cc \ --cc=corbet@lwn.net \ --cc=devicetree@vger.kernel.org \ --cc=frowand.list@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-doc@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=miquel.raynal@bootlin.com \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=srinivas.kandagatla@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.