[PATCH v3 02/15] arm64: dts: qcom: qcs404: align CDSP PAS node with bindings

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

The QCS404 CDSP remote processor can be brought to life using two
different bindings:
1. qcom,qcs404-cdsp-pas - currently used in DTSI.
2. qcom,qcs404-cdsp-pil.

Comment out the properties related to qcom,qcs404-cdsp-pil
(qcom,halt-regs, resets and additional clocks), to silence DT schema
warnings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. New patch.
---
 arch/arm64/boot/dts/qcom/qcs404.dtsi | 46 +++++++++++++++-------------
 1 file changed, 25 insertions(+), 21 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index a5324eecb50a..78a8ab29a0a9 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -485,27 +485,31 @@ remoteproc_cdsp: remoteproc@b00000 {
 			interrupt-names = "wdog", "fatal", "ready",
 					  "handover", "stop-ack";
 
-			clocks = <&xo_board>,
-				 <&gcc GCC_CDSP_CFG_AHB_CLK>,
-				 <&gcc GCC_CDSP_TBU_CLK>,
-				 <&gcc GCC_BIMC_CDSP_CLK>,
-				 <&turingcc TURING_WRAPPER_AON_CLK>,
-				 <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
-				 <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
-				 <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
-			clock-names = "xo",
-				      "sway",
-				      "tbu",
-				      "bimc",
-				      "ahb_aon",
-				      "q6ss_slave",
-				      "q6ss_master",
-				      "q6_axim";
-
-			resets = <&gcc GCC_CDSP_RESTART>;
-			reset-names = "restart";
-
-			qcom,halt-regs = <&tcsr 0x19004>;
+			clocks = <&xo_board>;
+			clock-names = "xo";
+
+			/*
+			 * If the node was using the PIL binding, then include properties:
+			 * clocks = <&xo_board>,
+			 *          <&gcc GCC_CDSP_CFG_AHB_CLK>,
+			 *          <&gcc GCC_CDSP_TBU_CLK>,
+			 *          <&gcc GCC_BIMC_CDSP_CLK>,
+			 *          <&turingcc TURING_WRAPPER_AON_CLK>,
+			 *          <&turingcc TURING_Q6SS_AHBS_AON_CLK>,
+			 *          <&turingcc TURING_Q6SS_AHBM_AON_CLK>,
+			 *          <&turingcc TURING_Q6SS_Q6_AXIM_CLK>;
+			 * clock-names = "xo",
+			 *               "sway",
+			 *               "tbu",
+			 *               "bimc",
+			 *               "ahb_aon",
+			 *               "q6ss_slave",
+			 *               "q6ss_master",
+			 *               "q6_axim";
+			 * resets = <&gcc GCC_CDSP_RESTART>;
+			 * reset-names = "restart";
+			 * qcom,halt-regs = <&tcsr 0x19004>;
+			 */
 
 			memory-region = <&cdsp_fw_mem>;
 
-- 
2.34.1