From: Michael Riesch <michael.riesch@wolfvision.net>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Sandy Huang <hjc@rock-chips.com>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Sascha Hauer <sha@pengutronix.de>,
Michael Riesch <michael.riesch@wolfvision.net>
Subject: [PATCH 0/5] drm/rockchip: vop2: add support for the rgb output block
Date: Wed, 30 Nov 2022 15:02:12 +0100 [thread overview]
Message-ID: <20221130140217.3196414-1-michael.riesch@wolfvision.net> (raw)
Hi all,
This series adds support for the RGB output block that can be found in the
Rockchip Video Output Processor (VOP) 2.
Patches 1-2 prepare the RGB part, which has been used only with the VOP(1)
so far.
Patch 3 is a cleanup patch and aims to make the creation and destruction of
the CRTCs and planes more readable.
Patch 4 activates the support for the RGB output block in the VOP2 driver.
Patch 5 adds pinctrls for the 16-bit and 18-bit RGB data lines.
Tested on a custom board featuring the RK3568 SoC with a 18-bit RGB
display.
Looking forward to your comments!
Best regards,
Michael
Michael Riesch (5):
drm/rockchip: rgb: embed drm_encoder into rockchip_encoder
drm/rockchip: rgb: add video_port parameter to init function
drm/rockchip: vop2: use symmetric function pair
vop2_{create,destroy}_crtcs
drm/rockchip: vop2: add support for the rgb output block
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to
rk356x
.../boot/dts/rockchip/rk3568-pinctrl.dtsi | 94 +++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 50 +++++++---
drivers/gpu/drm/rockchip/rockchip_rgb.c | 21 +++--
drivers/gpu/drm/rockchip/rockchip_rgb.h | 6 +-
5 files changed, 147 insertions(+), 26 deletions(-)
base-commit: b7b275e60bcd5f89771e865a8239325f86d9927d
--
2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Michael Riesch <michael.riesch@wolfvision.net>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Sandy Huang <hjc@rock-chips.com>,
Rob Herring <robh+dt@kernel.org>,
Michael Riesch <michael.riesch@wolfvision.net>,
Sascha Hauer <sha@pengutronix.de>
Subject: [PATCH 0/5] drm/rockchip: vop2: add support for the rgb output block
Date: Wed, 30 Nov 2022 15:02:12 +0100 [thread overview]
Message-ID: <20221130140217.3196414-1-michael.riesch@wolfvision.net> (raw)
Hi all,
This series adds support for the RGB output block that can be found in the
Rockchip Video Output Processor (VOP) 2.
Patches 1-2 prepare the RGB part, which has been used only with the VOP(1)
so far.
Patch 3 is a cleanup patch and aims to make the creation and destruction of
the CRTCs and planes more readable.
Patch 4 activates the support for the RGB output block in the VOP2 driver.
Patch 5 adds pinctrls for the 16-bit and 18-bit RGB data lines.
Tested on a custom board featuring the RK3568 SoC with a 18-bit RGB
display.
Looking forward to your comments!
Best regards,
Michael
Michael Riesch (5):
drm/rockchip: rgb: embed drm_encoder into rockchip_encoder
drm/rockchip: rgb: add video_port parameter to init function
drm/rockchip: vop2: use symmetric function pair
vop2_{create,destroy}_crtcs
drm/rockchip: vop2: add support for the rgb output block
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to
rk356x
.../boot/dts/rockchip/rk3568-pinctrl.dtsi | 94 +++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 50 +++++++---
drivers/gpu/drm/rockchip/rockchip_rgb.c | 21 +++--
drivers/gpu/drm/rockchip/rockchip_rgb.h | 6 +-
5 files changed, 147 insertions(+), 26 deletions(-)
base-commit: b7b275e60bcd5f89771e865a8239325f86d9927d
--
2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Michael Riesch <michael.riesch@wolfvision.net>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Sandy Huang <hjc@rock-chips.com>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Sascha Hauer <sha@pengutronix.de>,
Michael Riesch <michael.riesch@wolfvision.net>
Subject: [PATCH 0/5] drm/rockchip: vop2: add support for the rgb output block
Date: Wed, 30 Nov 2022 15:02:12 +0100 [thread overview]
Message-ID: <20221130140217.3196414-1-michael.riesch@wolfvision.net> (raw)
Hi all,
This series adds support for the RGB output block that can be found in the
Rockchip Video Output Processor (VOP) 2.
Patches 1-2 prepare the RGB part, which has been used only with the VOP(1)
so far.
Patch 3 is a cleanup patch and aims to make the creation and destruction of
the CRTCs and planes more readable.
Patch 4 activates the support for the RGB output block in the VOP2 driver.
Patch 5 adds pinctrls for the 16-bit and 18-bit RGB data lines.
Tested on a custom board featuring the RK3568 SoC with a 18-bit RGB
display.
Looking forward to your comments!
Best regards,
Michael
Michael Riesch (5):
drm/rockchip: rgb: embed drm_encoder into rockchip_encoder
drm/rockchip: rgb: add video_port parameter to init function
drm/rockchip: vop2: use symmetric function pair
vop2_{create,destroy}_crtcs
drm/rockchip: vop2: add support for the rgb output block
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to
rk356x
.../boot/dts/rockchip/rk3568-pinctrl.dtsi | 94 +++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 50 +++++++---
drivers/gpu/drm/rockchip/rockchip_rgb.c | 21 +++--
drivers/gpu/drm/rockchip/rockchip_rgb.h | 6 +-
5 files changed, 147 insertions(+), 26 deletions(-)
base-commit: b7b275e60bcd5f89771e865a8239325f86d9927d
--
2.30.2
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Michael Riesch <michael.riesch@wolfvision.net>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Sandy Huang <hjc@rock-chips.com>,
David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
Sascha Hauer <sha@pengutronix.de>,
Michael Riesch <michael.riesch@wolfvision.net>
Subject: [PATCH 0/5] drm/rockchip: vop2: add support for the rgb output block
Date: Wed, 30 Nov 2022 15:02:12 +0100 [thread overview]
Message-ID: <20221130140217.3196414-1-michael.riesch@wolfvision.net> (raw)
Hi all,
This series adds support for the RGB output block that can be found in the
Rockchip Video Output Processor (VOP) 2.
Patches 1-2 prepare the RGB part, which has been used only with the VOP(1)
so far.
Patch 3 is a cleanup patch and aims to make the creation and destruction of
the CRTCs and planes more readable.
Patch 4 activates the support for the RGB output block in the VOP2 driver.
Patch 5 adds pinctrls for the 16-bit and 18-bit RGB data lines.
Tested on a custom board featuring the RK3568 SoC with a 18-bit RGB
display.
Looking forward to your comments!
Best regards,
Michael
Michael Riesch (5):
drm/rockchip: rgb: embed drm_encoder into rockchip_encoder
drm/rockchip: rgb: add video_port parameter to init function
drm/rockchip: vop2: use symmetric function pair
vop2_{create,destroy}_crtcs
drm/rockchip: vop2: add support for the rgb output block
arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to
rk356x
.../boot/dts/rockchip/rk3568-pinctrl.dtsi | 94 +++++++++++++++++++
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +-
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 50 +++++++---
drivers/gpu/drm/rockchip/rockchip_rgb.c | 21 +++--
drivers/gpu/drm/rockchip/rockchip_rgb.h | 6 +-
5 files changed, 147 insertions(+), 26 deletions(-)
base-commit: b7b275e60bcd5f89771e865a8239325f86d9927d
--
2.30.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-11-30 14:03 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-30 14:02 Michael Riesch [this message]
2022-11-30 14:02 ` [PATCH 0/5] drm/rockchip: vop2: add support for the rgb output block Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` [PATCH 1/5] drm/rockchip: rgb: embed drm_encoder into rockchip_encoder Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-12-07 6:45 ` Sascha Hauer
2022-12-07 6:45 ` Sascha Hauer
2022-12-07 6:45 ` Sascha Hauer
2022-12-07 6:45 ` Sascha Hauer
2023-01-19 12:56 ` Michael Riesch
2023-01-19 12:56 ` Michael Riesch
2023-01-19 12:56 ` Michael Riesch
2023-01-19 12:56 ` Michael Riesch
2022-11-30 14:02 ` [PATCH 2/5] drm/rockchip: rgb: add video_port parameter to init function Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` [PATCH 3/5] drm/rockchip: vop2: use symmetric function pair vop2_{create,destroy}_crtcs Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` [PATCH 3/5] drm/rockchip: vop2: use symmetric function pair vop2_{create, destroy}_crtcs Michael Riesch
2022-11-30 14:02 ` [PATCH 4/5] drm/rockchip: vop2: add support for the rgb output block Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-12-07 6:51 ` Sascha Hauer
2022-12-07 6:51 ` Sascha Hauer
2022-12-07 6:51 ` Sascha Hauer
2022-12-07 6:51 ` Sascha Hauer
2022-11-30 14:02 ` [PATCH 5/5] arm64: dts: rockchip: add pinctrls for 16-bit/18-bit rgb interface to rk356x Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2022-11-30 14:02 ` Michael Riesch
2023-01-19 12:01 ` Michael Riesch
2023-01-19 12:01 ` Michael Riesch
2023-01-19 12:01 ` Michael Riesch
2023-01-19 12:01 ` Michael Riesch
2022-12-31 20:47 [PATCH 3/5] drm/rockchip: vop2: use symmetric function pair vop2_{create,destroy}_crtcs kernel test robot
2023-01-03 8:07 ` Dan Carpenter
2023-01-03 8:07 ` Dan Carpenter
2023-01-03 8:07 ` Dan Carpenter
2023-01-03 8:07 ` Dan Carpenter
2023-01-19 9:41 ` Michael Riesch
2023-01-19 9:41 ` Michael Riesch
2023-01-19 9:41 ` Michael Riesch
2023-01-19 9:41 ` Michael Riesch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221130140217.3196414-1-michael.riesch@wolfvision.net \
--to=michael.riesch@wolfvision.net \
--cc=airlied@gmail.com \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=heiko@sntech.de \
--cc=hjc@rock-chips.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=sha@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.