From: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
To: davem@davemloft.net, kuba@kernel.org
Cc: linux-bluetooth@vger.kernel.org, netdev@vger.kernel.org
Subject: pull request: bluetooth-next 2022-12-12
Date: Mon, 12 Dec 2022 14:23:22 -0800 [thread overview]
Message-ID: <20221212222322.1690780-1-luiz.dentz@gmail.com> (raw)
The following changes since commit 15eb1621762134bd3a0f81020359b0c7745d1080:
dt-bindings: net: Convert Socionext NetSec Ethernet to DT schema (2022-12-12 13:03:45 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next.git tags/for-net-next-2022-12-12
for you to fetch changes up to 7aca0ac4792e6cb0f35ef97bfcb39b1663a92fb7:
Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete (2022-12-12 14:19:26 -0800)
----------------------------------------------------------------
bluetooth-next pull request for net-next:
- Add a new VID/PID 0489/e0f2 for MT7922
- Add Realtek RTL8852BE support ID 0x0cb8:0xc559
- Add a new PID/VID 13d3/3549 for RTL8822CU
- Add support for broadcom BCM43430A0 & BCM43430A1
- Add CONFIG_BT_HCIBTUSB_POLL_SYNC
- Add CONFIG_BT_LE_L2CAP_ECRED
- Add support for CYW4373A0
- Add support for RTL8723DS
- Add more device IDs for WCN6855
- Add Broadcom BCM4377 family PCIe Bluetooth
----------------------------------------------------------------
Andy Chi (1):
Bluetooth: btusb: Add a new VID/PID 0489/e0f2 for MT7922
Archie Pusaka (2):
Bluetooth: btusb: Introduce generic USB reset
Bluetooth: hci_sync: cancel cmd_timer if hci_open failed
Artem Lukyanov (1):
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0cb8:0xc559
Chethan Tumkur Narayan (1):
btusb: Avoid reset of ISOC endpoint alt settings to zero
Christophe JAILLET (1):
Bluetooth: Fix EALREADY and ELOOP cases in bt_status()
Gongwei Li (1):
Bluetooth: btusb: Add a new PID/VID 13d3/3549 for RTL8822CU
Hilda Wu (2):
Bluetooth: btrtl: Add btrealtek data struct
Bluetooth: btusb: Ignore zero length of USB packets on ALT 6 for specific chip
Igor Skalkin (1):
virtio_bt: Fix alignment in configuration struct
Inga Stotland (1):
Bluetooth: MGMT: Fix error report for ADD_EXT_ADV_PARAMS
Jiapeng Chong (1):
Bluetooth: Use kzalloc instead of kmalloc/memset
Kang Minchul (1):
Bluetooth: Use kzalloc instead of kmalloc/memset
Luca Weiss (1):
dt-bindings: bluetooth: broadcom: add BCM43430A0 & BCM43430A1
Luiz Augusto von Dentz (11):
Bluetooth: hci_sync: Fix not setting static address
Bluetooth: hci_sync: Fix not able to set force_static_address
Bluetooth: btusb: Add CONFIG_BT_HCIBTUSB_POLL_SYNC
Bluetooth: btusb: Default CONFIG_BT_HCIBTUSB_POLL_SYNC=y
Bluetooth: Add CONFIG_BT_LE_L2CAP_ECRED
Bluetooth: btusb: Fix new sparce warnings
Bluetooth: btusb: Fix existing sparce warning
Bluetooth: btintel: Fix existing sparce warnings
Bluetooth: hci_conn: Fix crash on hci_create_cis_sync
Bluetooth: ISO: Avoid circular locking dependency
Bluetooth: Wait for HCI_OP_WRITE_AUTH_PAYLOAD_TO to complete
Marek Vasut (2):
dt-bindings: net: broadcom-bluetooth: Add CYW4373A0 DT binding
Bluetooth: hci_bcm: Add CYW4373A0 support
Michael S. Tsirkin (1):
Bluetooth: virtio_bt: fix device removal
Nicolas Cavallari (1):
Bluetooth: Work around SCO over USB HCI design defect
Pauli Virtanen (1):
Bluetooth: hci_conn: use HCI dst_type values also for BIS
Raman Varabets (1):
Bluetooth: btusb: Add Realtek 8761BUV support ID 0x2B89:0x8761
Samuel Holland (1):
dt-bindings: net: realtek-bluetooth: Add RTL8723DS
Shengyu Qu (1):
Bluetooth: btusb: Add more device IDs for WCN6855
Sven Peter (7):
dt-bindings: net: Add generic Bluetooth controller
dt-bindings: net: Add Broadcom BCM4377 family PCIe Bluetooth
arm64: dts: apple: t8103: Add Bluetooth controller
Bluetooth: hci_event: Ignore reserved bits in LE Extended Adv Report
Bluetooth: Add quirk to disable extended scanning
Bluetooth: Add quirk to disable MWS Transport Configuration
Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCIe boards
Wang ShaoBo (1):
Bluetooth: btintel: Fix missing free skb in btintel_setup_combined()
Yang Yingliang (9):
Bluetooth: hci_core: fix error handling in hci_register_dev()
Bluetooth: hci_bcm4377: Fix missing pci_disable_device() on error in bcm4377_probe()
Bluetooth: btusb: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_qca: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_ll: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_h5: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_bcsp: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: hci_core: don't call kfree_skb() under spin_lock_irqsave()
Bluetooth: RFCOMM: don't call kfree_skb() under spin_lock_irqsave()
Zhengping Jiang (1):
Bluetooth: hci_qca: only assign wakeup with serial port support
.../devicetree/bindings/net/bluetooth.txt | 5 -
.../net/bluetooth/bluetooth-controller.yaml | 29 +
.../net/bluetooth/brcm,bcm4377-bluetooth.yaml | 81 +
.../net/{ => bluetooth}/qualcomm-bluetooth.yaml | 6 +-
.../bindings/net/broadcom-bluetooth.yaml | 3 +
.../devicetree/bindings/net/realtek-bluetooth.yaml | 1 +
.../devicetree/bindings/soc/qcom/qcom,wcnss.yaml | 8 +-
MAINTAINERS | 2 +
arch/arm64/boot/dts/apple/t8103-j274.dts | 4 +
arch/arm64/boot/dts/apple/t8103-j293.dts | 4 +
arch/arm64/boot/dts/apple/t8103-j313.dts | 4 +
arch/arm64/boot/dts/apple/t8103-j456.dts | 4 +
arch/arm64/boot/dts/apple/t8103-j457.dts | 4 +
arch/arm64/boot/dts/apple/t8103-jxxx.dtsi | 8 +
drivers/bluetooth/Kconfig | 23 +
drivers/bluetooth/Makefile | 1 +
drivers/bluetooth/btintel.c | 21 +-
drivers/bluetooth/btrtl.c | 7 +
drivers/bluetooth/btrtl.h | 21 +
drivers/bluetooth/btusb.c | 236 +-
drivers/bluetooth/hci_bcm.c | 13 +-
drivers/bluetooth/hci_bcm4377.c | 2514 ++++++++++++++++++++
drivers/bluetooth/hci_bcsp.c | 2 +-
drivers/bluetooth/hci_h5.c | 2 +-
drivers/bluetooth/hci_ll.c | 2 +-
drivers/bluetooth/hci_qca.c | 5 +-
drivers/bluetooth/virtio_bt.c | 35 +-
include/net/bluetooth/hci.h | 21 +
include/net/bluetooth/hci_core.h | 8 +-
include/uapi/linux/virtio_bt.h | 8 +
net/bluetooth/Kconfig | 11 +
net/bluetooth/hci_conn.c | 17 +-
net/bluetooth/hci_core.c | 4 +-
net/bluetooth/hci_debugfs.c | 2 +-
net/bluetooth/hci_event.c | 24 +-
net/bluetooth/hci_sync.c | 21 +-
net/bluetooth/iso.c | 67 +-
net/bluetooth/l2cap_core.c | 2 +-
net/bluetooth/lib.c | 4 +-
net/bluetooth/mgmt.c | 2 +-
net/bluetooth/rfcomm/core.c | 2 +-
41 files changed, 3117 insertions(+), 121 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/net/bluetooth.txt
create mode 100644 Documentation/devicetree/bindings/net/bluetooth/bluetooth-controller.yaml
create mode 100644 Documentation/devicetree/bindings/net/bluetooth/brcm,bcm4377-bluetooth.yaml
rename Documentation/devicetree/bindings/net/{ => bluetooth}/qualcomm-bluetooth.yaml (96%)
create mode 100644 drivers/bluetooth/hci_bcm4377.c
next reply other threads:[~2022-12-12 22:23 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-12 22:23 Luiz Augusto von Dentz [this message]
2022-12-12 23:00 ` pull request: bluetooth-next 2022-12-12 patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221212222322.1690780-1-luiz.dentz@gmail.com \
--to=luiz.dentz@gmail.com \
--cc=davem@davemloft.net \
--cc=kuba@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.