From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 11/11] reset: starfive: Add StarFive JH7110 reset driver
Date: Tue, 20 Dec 2022 08:50:54 +0800 [thread overview]
Message-ID: <20221220005054.34518-12-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20221220005054.34518-1-hal.feng@starfivetech.com>
Add auxiliary driver to support StarFive JH7110 system
and always-on resets.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/reset/starfive/Kconfig | 8 +++
drivers/reset/starfive/Makefile | 1 +
.../reset/starfive/reset-starfive-jh7110.c | 64 +++++++++++++++++++
.../reset/starfive/reset-starfive-jh71x0.h | 6 ++
4 files changed, 79 insertions(+)
create mode 100644 drivers/reset/starfive/reset-starfive-jh7110.c
diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig
index 9d15c4110e40..fab1a081af17 100644
--- a/drivers/reset/starfive/Kconfig
+++ b/drivers/reset/starfive/Kconfig
@@ -10,3 +10,11 @@ config RESET_STARFIVE_JH7100
default SOC_STARFIVE
help
This enables the reset controller driver for the StarFive JH7100 SoC.
+
+config RESET_STARFIVE_JH7110
+ bool "StarFive JH7110 Reset Driver"
+ depends on AUXILIARY_BUS && CLK_STARFIVE_JH7110_SYS
+ select RESET_STARFIVE_JH71X0
+ default CLK_STARFIVE_JH7110_SYS
+ help
+ This enables the reset controller driver for the StarFive JH7110 SoC.
diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile
index f6aa12466fad..7a44b66fb9d5 100644
--- a/drivers/reset/starfive/Makefile
+++ b/drivers/reset/starfive/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_RESET_STARFIVE_JH71X0) += reset-starfive-jh71x0.o
obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
+obj-$(CONFIG_RESET_STARFIVE_JH7110) += reset-starfive-jh7110.o
diff --git a/drivers/reset/starfive/reset-starfive-jh7110.c b/drivers/reset/starfive/reset-starfive-jh7110.c
new file mode 100644
index 000000000000..74bbc79f86af
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jh7110.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Reset driver for the StarFive JH7110 SoC
+ *
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/auxiliary_bus.h>
+
+#include "reset-starfive-jh71x0.h"
+
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+static int jh7110_reset_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct reset_info *info = (struct reset_info *)(id->driver_data);
+ void __iomem *base = dev_get_drvdata(adev->dev.parent);
+
+ if (!info || !base)
+ return -ENODEV;
+
+ return reset_starfive_jh71x0_register(&adev->dev, adev->dev.parent->of_node,
+ base + info->assert_offset,
+ base + info->status_offset,
+ NULL,
+ info->nr_resets,
+ NULL);
+}
+
+static const struct reset_info jh7110_sys_info = {
+ .nr_resets = JH7110_SYSRST_END,
+ .assert_offset = 0x2F8,
+ .status_offset = 0x308,
+};
+
+static const struct reset_info jh7110_aon_info = {
+ .nr_resets = JH7110_AONRST_END,
+ .assert_offset = 0x38,
+ .status_offset = 0x3C,
+};
+
+static const struct auxiliary_device_id jh7110_reset_ids[] = {
+ {
+ .name = "clk_starfive_jh71x0.reset-sys",
+ .driver_data = (kernel_ulong_t)&jh7110_sys_info,
+ },
+ {
+ .name = "clk_starfive_jh71x0.reset-aon",
+ .driver_data = (kernel_ulong_t)&jh7110_aon_info,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, jh7110_reset_ids);
+
+static struct auxiliary_driver jh7110_reset_driver = {
+ .probe = jh7110_reset_probe,
+ .id_table = jh7110_reset_ids,
+};
+module_auxiliary_driver(jh7110_reset_driver);
+
+MODULE_AUTHOR("Hal Feng <hal.feng@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive JH7110 reset driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h
index db7d39a87f87..e485472e1adc 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.h
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
@@ -6,6 +6,12 @@
#ifndef __RESET_STARFIVE_JH71X0_H
#define __RESET_STARFIVE_JH71X0_H
+struct reset_info {
+ unsigned int nr_resets;
+ unsigned int assert_offset;
+ unsigned int status_offset;
+};
+
int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node,
void __iomem *assert, void __iomem *status,
const u32 *asserted, unsigned int nr_resets,
--
2.38.1
WARNING: multiple messages have this Message-ID (diff)
From: Hal Feng <hal.feng@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Cc: Conor Dooley <conor@kernel.org>,
Palmer Dabbelt <palmer@dabbelt.com>,
"Rob Herring" <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Stephen Boyd <sboyd@kernel.org>,
"Michael Turquette" <mturquette@baylibre.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Emil Renner Berthing <emil.renner.berthing@canonical.com>,
Hal Feng <hal.feng@starfivetech.com>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH v3 11/11] reset: starfive: Add StarFive JH7110 reset driver
Date: Tue, 20 Dec 2022 08:50:54 +0800 [thread overview]
Message-ID: <20221220005054.34518-12-hal.feng@starfivetech.com> (raw)
In-Reply-To: <20221220005054.34518-1-hal.feng@starfivetech.com>
Add auxiliary driver to support StarFive JH7110 system
and always-on resets.
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
drivers/reset/starfive/Kconfig | 8 +++
drivers/reset/starfive/Makefile | 1 +
.../reset/starfive/reset-starfive-jh7110.c | 64 +++++++++++++++++++
.../reset/starfive/reset-starfive-jh71x0.h | 6 ++
4 files changed, 79 insertions(+)
create mode 100644 drivers/reset/starfive/reset-starfive-jh7110.c
diff --git a/drivers/reset/starfive/Kconfig b/drivers/reset/starfive/Kconfig
index 9d15c4110e40..fab1a081af17 100644
--- a/drivers/reset/starfive/Kconfig
+++ b/drivers/reset/starfive/Kconfig
@@ -10,3 +10,11 @@ config RESET_STARFIVE_JH7100
default SOC_STARFIVE
help
This enables the reset controller driver for the StarFive JH7100 SoC.
+
+config RESET_STARFIVE_JH7110
+ bool "StarFive JH7110 Reset Driver"
+ depends on AUXILIARY_BUS && CLK_STARFIVE_JH7110_SYS
+ select RESET_STARFIVE_JH71X0
+ default CLK_STARFIVE_JH7110_SYS
+ help
+ This enables the reset controller driver for the StarFive JH7110 SoC.
diff --git a/drivers/reset/starfive/Makefile b/drivers/reset/starfive/Makefile
index f6aa12466fad..7a44b66fb9d5 100644
--- a/drivers/reset/starfive/Makefile
+++ b/drivers/reset/starfive/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_RESET_STARFIVE_JH71X0) += reset-starfive-jh71x0.o
obj-$(CONFIG_RESET_STARFIVE_JH7100) += reset-starfive-jh7100.o
+obj-$(CONFIG_RESET_STARFIVE_JH7110) += reset-starfive-jh7110.o
diff --git a/drivers/reset/starfive/reset-starfive-jh7110.c b/drivers/reset/starfive/reset-starfive-jh7110.c
new file mode 100644
index 000000000000..74bbc79f86af
--- /dev/null
+++ b/drivers/reset/starfive/reset-starfive-jh7110.c
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Reset driver for the StarFive JH7110 SoC
+ *
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/auxiliary_bus.h>
+
+#include "reset-starfive-jh71x0.h"
+
+#include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+static int jh7110_reset_probe(struct auxiliary_device *adev,
+ const struct auxiliary_device_id *id)
+{
+ struct reset_info *info = (struct reset_info *)(id->driver_data);
+ void __iomem *base = dev_get_drvdata(adev->dev.parent);
+
+ if (!info || !base)
+ return -ENODEV;
+
+ return reset_starfive_jh71x0_register(&adev->dev, adev->dev.parent->of_node,
+ base + info->assert_offset,
+ base + info->status_offset,
+ NULL,
+ info->nr_resets,
+ NULL);
+}
+
+static const struct reset_info jh7110_sys_info = {
+ .nr_resets = JH7110_SYSRST_END,
+ .assert_offset = 0x2F8,
+ .status_offset = 0x308,
+};
+
+static const struct reset_info jh7110_aon_info = {
+ .nr_resets = JH7110_AONRST_END,
+ .assert_offset = 0x38,
+ .status_offset = 0x3C,
+};
+
+static const struct auxiliary_device_id jh7110_reset_ids[] = {
+ {
+ .name = "clk_starfive_jh71x0.reset-sys",
+ .driver_data = (kernel_ulong_t)&jh7110_sys_info,
+ },
+ {
+ .name = "clk_starfive_jh71x0.reset-aon",
+ .driver_data = (kernel_ulong_t)&jh7110_aon_info,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, jh7110_reset_ids);
+
+static struct auxiliary_driver jh7110_reset_driver = {
+ .probe = jh7110_reset_probe,
+ .id_table = jh7110_reset_ids,
+};
+module_auxiliary_driver(jh7110_reset_driver);
+
+MODULE_AUTHOR("Hal Feng <hal.feng@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive JH7110 reset driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/reset/starfive/reset-starfive-jh71x0.h b/drivers/reset/starfive/reset-starfive-jh71x0.h
index db7d39a87f87..e485472e1adc 100644
--- a/drivers/reset/starfive/reset-starfive-jh71x0.h
+++ b/drivers/reset/starfive/reset-starfive-jh71x0.h
@@ -6,6 +6,12 @@
#ifndef __RESET_STARFIVE_JH71X0_H
#define __RESET_STARFIVE_JH71X0_H
+struct reset_info {
+ unsigned int nr_resets;
+ unsigned int assert_offset;
+ unsigned int status_offset;
+};
+
int reset_starfive_jh71x0_register(struct device *dev, struct device_node *of_node,
void __iomem *assert, void __iomem *status,
const u32 *asserted, unsigned int nr_resets,
--
2.38.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2022-12-20 0:51 UTC|newest]
Thread overview: 120+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-20 0:50 [PATCH v3 00/11] Basic clock and reset support for StarFive JH7110 RISC-V SoC Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 01/11] clk: starfive: Factor out common JH7100 and JH7110 code Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-20 21:54 ` Conor Dooley
2022-12-20 21:54 ` Conor Dooley
2022-12-20 0:50 ` [PATCH v3 02/11] clk: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-20 22:08 ` Conor Dooley
2022-12-20 22:08 ` Conor Dooley
2022-12-23 6:23 ` Hal Feng
2022-12-23 6:23 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 03/11] reset: Create subdirectory for StarFive drivers Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-20 22:15 ` Conor Dooley
2022-12-20 22:15 ` Conor Dooley
2022-12-23 7:02 ` Hal Feng
2022-12-23 7:02 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 04/11] reset: starfive: Factor out common JH71X0 reset code Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-20 22:28 ` Conor Dooley
2022-12-20 22:28 ` Conor Dooley
2022-12-23 7:49 ` Hal Feng
2022-12-23 7:49 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 05/11] reset: starfive: Rename "jh7100" to "jh71x0" for the common code Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-20 2:40 ` kernel test robot
2022-12-20 2:40 ` kernel test robot
2022-12-20 22:31 ` Conor Dooley
2022-12-20 22:31 ` Conor Dooley
2022-12-24 3:48 ` kernel test robot
2022-12-24 3:48 ` kernel test robot
2022-12-20 0:50 ` [PATCH v3 06/11] reset: starfive: jh71x0: Use 32bit I/O on 32bit registers Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-20 22:49 ` Conor Dooley
2022-12-20 22:49 ` Conor Dooley
2022-12-20 0:50 ` [PATCH v3 07/11] dt-bindings: clock: Add StarFive JH7110 system clock and reset generator Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-20 20:12 ` Rob Herring
2022-12-20 20:12 ` Rob Herring
2022-12-20 23:14 ` Conor Dooley
2022-12-20 23:14 ` Conor Dooley
2022-12-20 23:16 ` Conor Dooley
2022-12-20 23:16 ` Conor Dooley
2022-12-25 16:26 ` Hal Feng
2022-12-25 16:26 ` Hal Feng
2022-12-27 20:15 ` Conor Dooley
2022-12-27 20:15 ` Conor Dooley
2023-02-16 14:42 ` Hal Feng
2023-02-16 14:42 ` Hal Feng
2023-02-16 18:20 ` Conor Dooley
2023-02-16 18:20 ` Conor Dooley
2023-02-17 2:27 ` Hal Feng
2023-02-17 2:27 ` Hal Feng
2023-02-17 7:51 ` Conor Dooley
2023-02-17 7:51 ` Conor Dooley
2023-02-17 12:20 ` Hal Feng
2023-02-17 12:20 ` Hal Feng
2023-02-17 13:32 ` Conor Dooley
2023-02-17 13:32 ` Conor Dooley
2023-02-17 15:47 ` Krzysztof Kozlowski
2023-02-17 15:47 ` Krzysztof Kozlowski
2023-02-17 16:27 ` Conor Dooley
2023-02-17 16:27 ` Conor Dooley
2023-02-18 10:20 ` Krzysztof Kozlowski
2023-02-18 10:20 ` Krzysztof Kozlowski
2023-02-18 11:17 ` Conor Dooley
2023-02-18 11:17 ` Conor Dooley
2023-02-18 14:55 ` Krzysztof Kozlowski
2023-02-18 14:55 ` Krzysztof Kozlowski
2023-02-18 15:08 ` Conor Dooley
2023-02-18 15:08 ` Conor Dooley
2023-02-21 22:17 ` Stephen Boyd
2023-02-21 22:17 ` Stephen Boyd
2023-02-21 23:39 ` Conor Dooley
2023-02-21 23:39 ` Conor Dooley
2023-02-22 13:27 ` Hal Feng
2023-02-22 13:27 ` Hal Feng
2023-02-22 16:26 ` Conor Dooley
2023-02-22 16:26 ` Conor Dooley
2023-02-23 3:03 ` Hal Feng
2023-02-23 3:03 ` Hal Feng
2023-02-23 6:18 ` Conor Dooley
2023-02-23 6:18 ` Conor Dooley
2023-02-23 9:52 ` Hal Feng
2023-02-23 9:52 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 08/11] dt-bindings: clock: Add StarFive JH7110 always-on " Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-20 20:14 ` Rob Herring
2022-12-20 20:14 ` Rob Herring
2022-12-20 23:19 ` Conor Dooley
2022-12-20 23:19 ` Conor Dooley
2023-02-16 17:19 ` Hal Feng
2023-02-16 17:19 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 09/11] clk: starfive: Add StarFive JH7110 system clock driver Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-23 9:57 ` kernel test robot
2022-12-23 9:57 ` kernel test robot
2023-01-05 11:32 ` kernel test robot
2023-01-05 11:32 ` kernel test robot
2023-02-19 21:23 ` Emil Renner Berthing
2023-02-19 21:23 ` Emil Renner Berthing
2023-02-21 6:44 ` Hal Feng
2023-02-21 6:44 ` Hal Feng
2022-12-20 0:50 ` [PATCH v3 10/11] clk: starfive: Add StarFive JH7110 always-on " Hal Feng
2022-12-20 0:50 ` Hal Feng
2022-12-23 11:28 ` kernel test robot
2022-12-23 11:28 ` kernel test robot
2023-01-05 13:44 ` kernel test robot
2023-01-05 13:44 ` kernel test robot
2022-12-20 0:50 ` Hal Feng [this message]
2022-12-20 0:50 ` [PATCH v3 11/11] reset: starfive: Add StarFive JH7110 reset driver Hal Feng
2022-12-20 7:14 ` kernel test robot
2022-12-20 7:14 ` kernel test robot
2022-12-23 12:39 ` kernel test robot
2022-12-23 12:39 ` kernel test robot
2022-12-27 19:20 ` kernel test robot
2022-12-27 19:20 ` kernel test robot
2023-01-05 15:35 ` kernel test robot
2023-01-05 15:35 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221220005054.34518-12-hal.feng@starfivetech.com \
--to=hal.feng@starfivetech.com \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=emil.renner.berthing@canonical.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=palmer@dabbelt.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.