From: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Subject: [PATCH] wifi: ath11k: Set ext passive scan flag to adjust passive scan start time Date: Thu, 22 Dec 2022 18:47:20 +0530 [thread overview] Message-ID: <20221222131720.11368-1-quic_tamizhr@quicinc.com> (raw) Set the WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE flag while sending the scan command. If this flag is enabled when the incoming scan request comes with a strict start time and its duration overlaps with next TBTT, then target adjust the start time accordingly for passive scan. Target supporting this feature will advertise WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01467-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> --- drivers/net/wireless/ath/ath11k/wmi.c | 7 +++++++ drivers/net/wireless/ath/ath11k/wmi.h | 3 +++ 2 files changed, 10 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index 2a8a3e3dcff6..c786c5097ae3 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -2068,6 +2068,11 @@ void ath11k_wmi_start_scan_init(struct ath11k *ar, WMI_SCAN_EVENT_FOREIGN_CHAN | WMI_SCAN_EVENT_DEQUEUED; arg->scan_flags |= WMI_SCAN_CHAN_STAT_EVENT; + + if (test_bit(WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE, + ar->ab->wmi_ab.svc_map)) + arg->scan_ctrl_flags_ext |= WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE; + arg->num_bssid = 1; /* fill bssid_list[0] with 0xff, otherwise bssid and RA will be @@ -2149,6 +2154,8 @@ ath11k_wmi_copy_scan_event_cntrl_flags(struct wmi_start_scan_cmd *cmd, /* for adaptive scan mode using 3 bits (21 - 23 bits) */ WMI_SCAN_SET_DWELL_MODE(cmd->scan_ctrl_flags, param->adaptive_dwell_time_mode); + + cmd->scan_ctrl_flags_ext = param->scan_ctrl_flags_ext; } int ath11k_wmi_send_scan_start_cmd(struct ath11k *ar, diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h index 8f2c07d70a4a..5583582b8afa 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.h +++ b/drivers/net/wireless/ath/ath11k/wmi.h @@ -2092,6 +2092,7 @@ enum wmi_tlv_service { WMI_TLV_SERVICE_EXT2_MSG = 220, WMI_TLV_SERVICE_PEER_POWER_SAVE_DURATION_SUPPORT = 246, WMI_TLV_SERVICE_SRG_SRP_SPATIAL_REUSE_SUPPORT = 249, + WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE = 263, /* The second 128 bits */ WMI_MAX_EXT_SERVICE = 256, @@ -3222,6 +3223,7 @@ struct wmi_start_scan_cmd { #define WMI_SCAN_DWELL_MODE_MASK 0x00E00000 #define WMI_SCAN_DWELL_MODE_SHIFT 21 +#define WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE 0x00000800 enum { WMI_SCAN_DWELL_MODE_DEFAULT = 0, @@ -3269,6 +3271,7 @@ struct scan_req_params { }; u32 scan_events; }; + u32 scan_ctrl_flags_ext; u32 dwell_time_active; u32 dwell_time_active_2g; u32 dwell_time_passive; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> To: <ath11k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> Subject: [PATCH] wifi: ath11k: Set ext passive scan flag to adjust passive scan start time Date: Thu, 22 Dec 2022 18:47:20 +0530 [thread overview] Message-ID: <20221222131720.11368-1-quic_tamizhr@quicinc.com> (raw) Set the WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE flag while sending the scan command. If this flag is enabled when the incoming scan request comes with a strict start time and its duration overlaps with next TBTT, then target adjust the start time accordingly for passive scan. Target supporting this feature will advertise WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01467-QCAHKSWPL_SILICONZ-1 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com> --- drivers/net/wireless/ath/ath11k/wmi.c | 7 +++++++ drivers/net/wireless/ath/ath11k/wmi.h | 3 +++ 2 files changed, 10 insertions(+) diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index 2a8a3e3dcff6..c786c5097ae3 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -2068,6 +2068,11 @@ void ath11k_wmi_start_scan_init(struct ath11k *ar, WMI_SCAN_EVENT_FOREIGN_CHAN | WMI_SCAN_EVENT_DEQUEUED; arg->scan_flags |= WMI_SCAN_CHAN_STAT_EVENT; + + if (test_bit(WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE, + ar->ab->wmi_ab.svc_map)) + arg->scan_ctrl_flags_ext |= WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE; + arg->num_bssid = 1; /* fill bssid_list[0] with 0xff, otherwise bssid and RA will be @@ -2149,6 +2154,8 @@ ath11k_wmi_copy_scan_event_cntrl_flags(struct wmi_start_scan_cmd *cmd, /* for adaptive scan mode using 3 bits (21 - 23 bits) */ WMI_SCAN_SET_DWELL_MODE(cmd->scan_ctrl_flags, param->adaptive_dwell_time_mode); + + cmd->scan_ctrl_flags_ext = param->scan_ctrl_flags_ext; } int ath11k_wmi_send_scan_start_cmd(struct ath11k *ar, diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h index 8f2c07d70a4a..5583582b8afa 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.h +++ b/drivers/net/wireless/ath/ath11k/wmi.h @@ -2092,6 +2092,7 @@ enum wmi_tlv_service { WMI_TLV_SERVICE_EXT2_MSG = 220, WMI_TLV_SERVICE_PEER_POWER_SAVE_DURATION_SUPPORT = 246, WMI_TLV_SERVICE_SRG_SRP_SPATIAL_REUSE_SUPPORT = 249, + WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE = 263, /* The second 128 bits */ WMI_MAX_EXT_SERVICE = 256, @@ -3222,6 +3223,7 @@ struct wmi_start_scan_cmd { #define WMI_SCAN_DWELL_MODE_MASK 0x00E00000 #define WMI_SCAN_DWELL_MODE_SHIFT 21 +#define WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE 0x00000800 enum { WMI_SCAN_DWELL_MODE_DEFAULT = 0, @@ -3269,6 +3271,7 @@ struct scan_req_params { }; u32 scan_events; }; + u32 scan_ctrl_flags_ext; u32 dwell_time_active; u32 dwell_time_active_2g; u32 dwell_time_passive; -- 2.17.1 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next reply other threads:[~2022-12-22 13:18 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-12-22 13:17 Tamizh Chelvam Raja [this message] 2022-12-22 13:17 ` [PATCH] wifi: ath11k: Set ext passive scan flag to adjust passive scan start time Tamizh Chelvam Raja 2023-01-02 10:19 ` Vasanthakumar Thiagarajan 2023-01-02 10:19 ` Vasanthakumar Thiagarajan 2023-01-04 4:56 ` Tamizh Chelvam Raja 2023-01-04 4:56 ` Tamizh Chelvam Raja 2023-01-04 6:54 ` Vasanthakumar Thiagarajan 2023-01-04 6:54 ` Vasanthakumar Thiagarajan 2023-02-17 15:57 ` Kalle Valo 2023-02-17 15:57 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20221222131720.11368-1-quic_tamizhr@quicinc.com \ --to=quic_tamizhr@quicinc.com \ --cc=ath11k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.