All of lore.kernel.org
 help / color / mirror / Atom feed
From: Samuel Holland <samuel@sholland.org>
To: Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: Samuel Holland <samuel@sholland.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev
Subject: [PATCH 2/2] soc: sunxi: Add Allwinner D1 PPU driver
Date: Sat, 31 Dec 2022 10:04:02 -0600	[thread overview]
Message-ID: <20221231160402.16157-3-samuel@sholland.org> (raw)
In-Reply-To: <20221231160402.16157-1-samuel@sholland.org>

The PPU contains a series of identical MMIO register ranges, one for
each power domain. Each range contains control/status bits for a clock
gate, reset line, output gates, and a power switch. (The clock and reset
are separate from, and in addition to, the bits in the CCU.) It also
contains a hardware power sequence engine to control the other bits.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 drivers/soc/sunxi/Kconfig      |   9 ++
 drivers/soc/sunxi/Makefile     |   1 +
 drivers/soc/sunxi/sun20i-ppu.c | 207 +++++++++++++++++++++++++++++++++
 3 files changed, 217 insertions(+)
 create mode 100644 drivers/soc/sunxi/sun20i-ppu.c

diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
index 8aecbc9b1976..5e84cf4b8510 100644
--- a/drivers/soc/sunxi/Kconfig
+++ b/drivers/soc/sunxi/Kconfig
@@ -19,3 +19,12 @@ config SUNXI_SRAM
 	  Say y here to enable the SRAM controller support. This
 	  device is responsible on mapping the SRAM in the sunXi SoCs
 	  whether to the CPU/DMA, or to the devices.
+
+config SUN20I_PPU
+	bool "Allwinner D1 PPU power domain driver"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	select PM_GENERIC_DOMAINS
+	help
+	  Say y to enable the PPU power domain driver. This saves power
+	  when certain peripherals, such as the video engine, are idle.
+	  All power domains are on by default, so this is optional.
diff --git a/drivers/soc/sunxi/Makefile b/drivers/soc/sunxi/Makefile
index 549159571d4f..90ff2ebe7655 100644
--- a/drivers/soc/sunxi/Makefile
+++ b/drivers/soc/sunxi/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_SUNXI_MBUS) +=	sunxi_mbus.o
 obj-$(CONFIG_SUNXI_SRAM) +=	sunxi_sram.o
+obj-$(CONFIG_SUN20I_PPU) +=	sun20i-ppu.o
diff --git a/drivers/soc/sunxi/sun20i-ppu.c b/drivers/soc/sunxi/sun20i-ppu.c
new file mode 100644
index 000000000000..98cb41d36560
--- /dev/null
+++ b/drivers/soc/sunxi/sun20i-ppu.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/reset.h>
+
+#define PD_STATE_ON			1
+#define PD_STATE_OFF			2
+
+#define PD_RSTN_REG			0x00
+#define PD_CLK_GATE_REG			0x04
+#define PD_PWROFF_GATE_REG		0x08
+#define PD_PSW_ON_REG			0x0c
+#define PD_PSW_OFF_REG			0x10
+#define PD_PSW_DELAY_REG		0x14
+#define PD_OFF_DELAY_REG		0x18
+#define PD_ON_DELAY_REG			0x1c
+#define PD_COMMAND_REG			0x20
+#define PD_STATUS_REG			0x24
+#define PD_STATUS_COMPLETE			BIT(1)
+#define PD_STATUS_BUSY				BIT(3)
+#define PD_STATUS_STATE				GENMASK(17, 16)
+#define PD_ACTIVE_CTRL_REG		0x2c
+#define PD_GATE_STATUS_REG		0x30
+#define PD_RSTN_STATUS				BIT(0)
+#define PD_CLK_GATE_STATUS			BIT(1)
+#define PD_PWROFF_GATE_STATUS			BIT(2)
+#define PD_PSW_STATUS_REG		0x34
+
+#define PD_REGS_SIZE			0x80
+
+struct sun20i_ppu_desc {
+	const char *const		*names;
+	unsigned int			num_domains;
+};
+
+struct sun20i_ppu_pd {
+	struct generic_pm_domain	genpd;
+	void __iomem			*base;
+};
+
+#define to_sun20i_ppu_pd(_genpd) \
+	container_of(_genpd, struct sun20i_ppu_pd, genpd)
+
+static bool sun20i_ppu_pd_is_on(const struct sun20i_ppu_pd *pd)
+{
+	u32 status = readl(pd->base + PD_STATUS_REG);
+
+	return FIELD_GET(PD_STATUS_STATE, status) == PD_STATE_ON;
+}
+
+static int sun20i_ppu_pd_set_power(const struct sun20i_ppu_pd *pd, bool power_on)
+{
+	u32 state, status;
+	int ret;
+
+	if (sun20i_ppu_pd_is_on(pd) == power_on)
+		return 0;
+
+	/* Wait for the power controller to be idle. */
+	ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+				 !(status & PD_STATUS_BUSY), 100, 1000);
+	if (ret)
+		return ret;
+
+	state = power_on ? PD_STATE_ON : PD_STATE_OFF;
+	writel(state, pd->base + PD_COMMAND_REG);
+
+	/* Wait for the state transition to complete. */
+	ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+				 FIELD_GET(PD_STATUS_STATE, status) == state &&
+				 (status & PD_STATUS_COMPLETE), 100, 1000);
+	if (ret)
+		return ret;
+
+	/* Clear the completion flag. */
+	writel(status, pd->base + PD_STATUS_REG);
+
+	return 0;
+}
+
+static int sun20i_ppu_pd_power_on(struct generic_pm_domain *genpd)
+{
+	const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+	return sun20i_ppu_pd_set_power(pd, true);
+}
+
+static int sun20i_ppu_pd_power_off(struct generic_pm_domain *genpd)
+{
+	const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+	return sun20i_ppu_pd_set_power(pd, false);
+}
+
+static int sun20i_ppu_probe(struct platform_device *pdev)
+{
+	const struct sun20i_ppu_desc *desc;
+	struct device *dev = &pdev->dev;
+	struct genpd_onecell_data *ppu;
+	struct sun20i_ppu_pd *pds;
+	struct reset_control *rst;
+	void __iomem *base;
+	struct clk *clk;
+	int ret;
+
+	desc = of_device_get_match_data(dev);
+	if (!desc)
+		return -EINVAL;
+
+	pds = devm_kcalloc(dev, desc->num_domains, sizeof(*pds), GFP_KERNEL);
+	if (!pds)
+		return -ENOMEM;
+
+	ppu = devm_kzalloc(dev, sizeof(*ppu), GFP_KERNEL);
+	if (!ppu)
+		return -ENOMEM;
+
+	ppu->domains = devm_kcalloc(dev, desc->num_domains,
+				    sizeof(*ppu->domains), GFP_KERNEL);
+	if (!ppu->domains)
+		return -ENOMEM;
+
+	ppu->num_domains = desc->num_domains;
+	platform_set_drvdata(pdev, ppu);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(rst))
+		return PTR_ERR(rst);
+
+	ret = reset_control_deassert(rst);
+	if (ret)
+		return ret;
+
+	for (unsigned int i = 0; i < ppu->num_domains; ++i) {
+		struct sun20i_ppu_pd *pd = &pds[i];
+
+		pd->genpd.name		= desc->names[i];
+		pd->genpd.power_off	= sun20i_ppu_pd_power_off;
+		pd->genpd.power_on	= sun20i_ppu_pd_power_on;
+		pd->base		= base + PD_REGS_SIZE * i;
+
+		ret = pm_genpd_init(&pd->genpd, NULL, sun20i_ppu_pd_is_on(pd));
+		if (ret) {
+			dev_warn(dev, "Failed to add '%s' domain: %d\n",
+				 pd->genpd.name, ret);
+			continue;
+		}
+
+		ppu->domains[i] = &pd->genpd;
+	}
+
+	ret = of_genpd_add_provider_onecell(dev->of_node, ppu);
+	if (ret)
+		dev_warn(dev, "Failed to add provider: %d\n", ret);
+
+	return 0;
+}
+
+static const char *const sun20i_d1_ppu_pd_names[] = {
+	"CPU",
+	"VE",
+	"DSP",
+};
+
+static const struct sun20i_ppu_desc sun20i_d1_ppu_desc = {
+	.names		= sun20i_d1_ppu_pd_names,
+	.num_domains	= ARRAY_SIZE(sun20i_d1_ppu_pd_names),
+};
+
+static const struct of_device_id sun20i_ppu_of_match[] = {
+	{
+		.compatible	= "allwinner,sun20i-d1-ppu",
+		.data		= &sun20i_d1_ppu_desc,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sun20i_ppu_of_match);
+
+static struct platform_driver sun20i_ppu_driver = {
+	.probe	= sun20i_ppu_probe,
+	.driver	= {
+		.name			= "sun20i-ppu",
+		.of_match_table		= sun20i_ppu_of_match,
+		/* Power domains cannot be removed while they are in use. */
+		.suppress_bind_attrs	= true,
+	},
+};
+module_platform_driver(sun20i_ppu_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
+MODULE_DESCRIPTION("Allwinner D1 PPU power domain driver");
+MODULE_LICENSE("GPL");
-- 
2.37.4


WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org>
To: Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: Samuel Holland <samuel@sholland.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-sunxi@lists.linux.dev
Subject: [PATCH 2/2] soc: sunxi: Add Allwinner D1 PPU driver
Date: Sat, 31 Dec 2022 10:04:02 -0600	[thread overview]
Message-ID: <20221231160402.16157-3-samuel@sholland.org> (raw)
In-Reply-To: <20221231160402.16157-1-samuel@sholland.org>

The PPU contains a series of identical MMIO register ranges, one for
each power domain. Each range contains control/status bits for a clock
gate, reset line, output gates, and a power switch. (The clock and reset
are separate from, and in addition to, the bits in the CCU.) It also
contains a hardware power sequence engine to control the other bits.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---

 drivers/soc/sunxi/Kconfig      |   9 ++
 drivers/soc/sunxi/Makefile     |   1 +
 drivers/soc/sunxi/sun20i-ppu.c | 207 +++++++++++++++++++++++++++++++++
 3 files changed, 217 insertions(+)
 create mode 100644 drivers/soc/sunxi/sun20i-ppu.c

diff --git a/drivers/soc/sunxi/Kconfig b/drivers/soc/sunxi/Kconfig
index 8aecbc9b1976..5e84cf4b8510 100644
--- a/drivers/soc/sunxi/Kconfig
+++ b/drivers/soc/sunxi/Kconfig
@@ -19,3 +19,12 @@ config SUNXI_SRAM
 	  Say y here to enable the SRAM controller support. This
 	  device is responsible on mapping the SRAM in the sunXi SoCs
 	  whether to the CPU/DMA, or to the devices.
+
+config SUN20I_PPU
+	bool "Allwinner D1 PPU power domain driver"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	select PM_GENERIC_DOMAINS
+	help
+	  Say y to enable the PPU power domain driver. This saves power
+	  when certain peripherals, such as the video engine, are idle.
+	  All power domains are on by default, so this is optional.
diff --git a/drivers/soc/sunxi/Makefile b/drivers/soc/sunxi/Makefile
index 549159571d4f..90ff2ebe7655 100644
--- a/drivers/soc/sunxi/Makefile
+++ b/drivers/soc/sunxi/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_SUNXI_MBUS) +=	sunxi_mbus.o
 obj-$(CONFIG_SUNXI_SRAM) +=	sunxi_sram.o
+obj-$(CONFIG_SUN20I_PPU) +=	sun20i-ppu.o
diff --git a/drivers/soc/sunxi/sun20i-ppu.c b/drivers/soc/sunxi/sun20i-ppu.c
new file mode 100644
index 000000000000..98cb41d36560
--- /dev/null
+++ b/drivers/soc/sunxi/sun20i-ppu.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/reset.h>
+
+#define PD_STATE_ON			1
+#define PD_STATE_OFF			2
+
+#define PD_RSTN_REG			0x00
+#define PD_CLK_GATE_REG			0x04
+#define PD_PWROFF_GATE_REG		0x08
+#define PD_PSW_ON_REG			0x0c
+#define PD_PSW_OFF_REG			0x10
+#define PD_PSW_DELAY_REG		0x14
+#define PD_OFF_DELAY_REG		0x18
+#define PD_ON_DELAY_REG			0x1c
+#define PD_COMMAND_REG			0x20
+#define PD_STATUS_REG			0x24
+#define PD_STATUS_COMPLETE			BIT(1)
+#define PD_STATUS_BUSY				BIT(3)
+#define PD_STATUS_STATE				GENMASK(17, 16)
+#define PD_ACTIVE_CTRL_REG		0x2c
+#define PD_GATE_STATUS_REG		0x30
+#define PD_RSTN_STATUS				BIT(0)
+#define PD_CLK_GATE_STATUS			BIT(1)
+#define PD_PWROFF_GATE_STATUS			BIT(2)
+#define PD_PSW_STATUS_REG		0x34
+
+#define PD_REGS_SIZE			0x80
+
+struct sun20i_ppu_desc {
+	const char *const		*names;
+	unsigned int			num_domains;
+};
+
+struct sun20i_ppu_pd {
+	struct generic_pm_domain	genpd;
+	void __iomem			*base;
+};
+
+#define to_sun20i_ppu_pd(_genpd) \
+	container_of(_genpd, struct sun20i_ppu_pd, genpd)
+
+static bool sun20i_ppu_pd_is_on(const struct sun20i_ppu_pd *pd)
+{
+	u32 status = readl(pd->base + PD_STATUS_REG);
+
+	return FIELD_GET(PD_STATUS_STATE, status) == PD_STATE_ON;
+}
+
+static int sun20i_ppu_pd_set_power(const struct sun20i_ppu_pd *pd, bool power_on)
+{
+	u32 state, status;
+	int ret;
+
+	if (sun20i_ppu_pd_is_on(pd) == power_on)
+		return 0;
+
+	/* Wait for the power controller to be idle. */
+	ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+				 !(status & PD_STATUS_BUSY), 100, 1000);
+	if (ret)
+		return ret;
+
+	state = power_on ? PD_STATE_ON : PD_STATE_OFF;
+	writel(state, pd->base + PD_COMMAND_REG);
+
+	/* Wait for the state transition to complete. */
+	ret = readl_poll_timeout(pd->base + PD_STATUS_REG, status,
+				 FIELD_GET(PD_STATUS_STATE, status) == state &&
+				 (status & PD_STATUS_COMPLETE), 100, 1000);
+	if (ret)
+		return ret;
+
+	/* Clear the completion flag. */
+	writel(status, pd->base + PD_STATUS_REG);
+
+	return 0;
+}
+
+static int sun20i_ppu_pd_power_on(struct generic_pm_domain *genpd)
+{
+	const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+	return sun20i_ppu_pd_set_power(pd, true);
+}
+
+static int sun20i_ppu_pd_power_off(struct generic_pm_domain *genpd)
+{
+	const struct sun20i_ppu_pd *pd = to_sun20i_ppu_pd(genpd);
+
+	return sun20i_ppu_pd_set_power(pd, false);
+}
+
+static int sun20i_ppu_probe(struct platform_device *pdev)
+{
+	const struct sun20i_ppu_desc *desc;
+	struct device *dev = &pdev->dev;
+	struct genpd_onecell_data *ppu;
+	struct sun20i_ppu_pd *pds;
+	struct reset_control *rst;
+	void __iomem *base;
+	struct clk *clk;
+	int ret;
+
+	desc = of_device_get_match_data(dev);
+	if (!desc)
+		return -EINVAL;
+
+	pds = devm_kcalloc(dev, desc->num_domains, sizeof(*pds), GFP_KERNEL);
+	if (!pds)
+		return -ENOMEM;
+
+	ppu = devm_kzalloc(dev, sizeof(*ppu), GFP_KERNEL);
+	if (!ppu)
+		return -ENOMEM;
+
+	ppu->domains = devm_kcalloc(dev, desc->num_domains,
+				    sizeof(*ppu->domains), GFP_KERNEL);
+	if (!ppu->domains)
+		return -ENOMEM;
+
+	ppu->num_domains = desc->num_domains;
+	platform_set_drvdata(pdev, ppu);
+
+	base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	clk = devm_clk_get_enabled(dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	rst = devm_reset_control_get_exclusive(dev, NULL);
+	if (IS_ERR(rst))
+		return PTR_ERR(rst);
+
+	ret = reset_control_deassert(rst);
+	if (ret)
+		return ret;
+
+	for (unsigned int i = 0; i < ppu->num_domains; ++i) {
+		struct sun20i_ppu_pd *pd = &pds[i];
+
+		pd->genpd.name		= desc->names[i];
+		pd->genpd.power_off	= sun20i_ppu_pd_power_off;
+		pd->genpd.power_on	= sun20i_ppu_pd_power_on;
+		pd->base		= base + PD_REGS_SIZE * i;
+
+		ret = pm_genpd_init(&pd->genpd, NULL, sun20i_ppu_pd_is_on(pd));
+		if (ret) {
+			dev_warn(dev, "Failed to add '%s' domain: %d\n",
+				 pd->genpd.name, ret);
+			continue;
+		}
+
+		ppu->domains[i] = &pd->genpd;
+	}
+
+	ret = of_genpd_add_provider_onecell(dev->of_node, ppu);
+	if (ret)
+		dev_warn(dev, "Failed to add provider: %d\n", ret);
+
+	return 0;
+}
+
+static const char *const sun20i_d1_ppu_pd_names[] = {
+	"CPU",
+	"VE",
+	"DSP",
+};
+
+static const struct sun20i_ppu_desc sun20i_d1_ppu_desc = {
+	.names		= sun20i_d1_ppu_pd_names,
+	.num_domains	= ARRAY_SIZE(sun20i_d1_ppu_pd_names),
+};
+
+static const struct of_device_id sun20i_ppu_of_match[] = {
+	{
+		.compatible	= "allwinner,sun20i-d1-ppu",
+		.data		= &sun20i_d1_ppu_desc,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sun20i_ppu_of_match);
+
+static struct platform_driver sun20i_ppu_driver = {
+	.probe	= sun20i_ppu_probe,
+	.driver	= {
+		.name			= "sun20i-ppu",
+		.of_match_table		= sun20i_ppu_of_match,
+		/* Power domains cannot be removed while they are in use. */
+		.suppress_bind_attrs	= true,
+	},
+};
+module_platform_driver(sun20i_ppu_driver);
+
+MODULE_AUTHOR("Samuel Holland <samuel@sholland.org>");
+MODULE_DESCRIPTION("Allwinner D1 PPU power domain driver");
+MODULE_LICENSE("GPL");
-- 
2.37.4


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2022-12-31 16:04 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-31 16:04 [PATCH 0/2] Allwinner power domain support Samuel Holland
2022-12-31 16:04 ` Samuel Holland
2022-12-31 16:04 ` [PATCH 1/2] dt-bindings: power: Add Allwinner D1 PPU Samuel Holland
2022-12-31 16:04   ` Samuel Holland
2022-12-31 18:58   ` Krzysztof Kozlowski
2022-12-31 18:58     ` Krzysztof Kozlowski
2022-12-31 19:12     ` Samuel Holland
2022-12-31 19:12       ` Samuel Holland
2022-12-31 16:04 ` Samuel Holland [this message]
2022-12-31 16:04   ` [PATCH 2/2] soc: sunxi: Add Allwinner D1 PPU driver Samuel Holland
2023-01-05 16:38   ` Jernej Škrabec
2023-01-05 16:38     ` Jernej Škrabec
2023-01-05 16:34 ` [PATCH 0/2] Allwinner power domain support Jernej Škrabec
2023-01-05 16:34   ` Jernej Škrabec
2023-01-26  6:23   ` Samuel Holland
2023-01-26  6:23     ` Samuel Holland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221231160402.16157-3-samuel@sholland.org \
    --to=samuel@sholland.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.