From: Andre Przywara <andre.przywara@arm.com> To: Chen-Yu Tsai <wens@csie.org>, Samuel Holland <samuel@sholland.org>, Jernej Skrabec <jernej.skrabec@gmail.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Bin Liu <b-liu@ti.com> Cc: Icenowy Zheng <uwu@icenowy.me>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, devicetree@vger.kernel.org, soc@kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev Subject: [PATCH v5 05/11] ARM: dts: suniv: licheepi-nano: enable USB Date: Wed, 11 Jan 2023 01:53:26 +0000 [thread overview] Message-ID: <20230111015332.172021-6-andre.przywara@arm.com> (raw) In-Reply-To: <20230111015332.172021-1-andre.przywara@arm.com> From: Icenowy Zheng <uwu@icenowy.me> Lichee Pi Nano has a Micro-USB connector, with its D+, D- pins connected to the USB pins of the SoC and ID pin connected to PE2 GPIO. Enable the USB functionality. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts index 04e59b8381cb8..43896723a994c 100644 --- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "suniv-f1c100s.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Lichee Pi Nano"; compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; @@ -50,8 +52,22 @@ flash@0 { }; }; +&otg_sram { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pe_pins>; status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */ + status = "okay"; +}; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: Chen-Yu Tsai <wens@csie.org>, Samuel Holland <samuel@sholland.org>, Jernej Skrabec <jernej.skrabec@gmail.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Bin Liu <b-liu@ti.com> Cc: Icenowy Zheng <uwu@icenowy.me>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, devicetree@vger.kernel.org, soc@kernel.org, linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev Subject: [PATCH v5 05/11] ARM: dts: suniv: licheepi-nano: enable USB Date: Wed, 11 Jan 2023 01:53:26 +0000 [thread overview] Message-ID: <20230111015332.172021-6-andre.przywara@arm.com> (raw) In-Reply-To: <20230111015332.172021-1-andre.przywara@arm.com> From: Icenowy Zheng <uwu@icenowy.me> Lichee Pi Nano has a Micro-USB connector, with its D+, D- pins connected to the USB pins of the SoC and ID pin connected to PE2 GPIO. Enable the USB functionality. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../arm/boot/dts/suniv-f1c100s-licheepi-nano.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts index 04e59b8381cb8..43896723a994c 100644 --- a/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts +++ b/arch/arm/boot/dts/suniv-f1c100s-licheepi-nano.dts @@ -6,6 +6,8 @@ /dts-v1/; #include "suniv-f1c100s.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Lichee Pi Nano"; compatible = "licheepi,licheepi-nano", "allwinner,suniv-f1c100s"; @@ -50,8 +52,22 @@ flash@0 { }; }; +&otg_sram { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pe_pins>; status = "okay"; }; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + usb0_id_det-gpios = <&pio 4 2 GPIO_ACTIVE_HIGH>; /* PE2 */ + status = "okay"; +}; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-01-11 1:53 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-01-11 1:53 [PATCH v5 00/11] ARM: suniv: USB and two new boards support Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-11 1:53 ` [PATCH v5 01/11] dt-bindings: usb: sunxi-musb: add F1C100s MUSB compatible string Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-11 1:53 ` [PATCH v5 02/11] usb: musb: sunxi: add support for the F1C100s MUSB controller Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-31 22:52 ` Andre Przywara 2023-01-31 22:52 ` Andre Przywara 2023-02-01 5:06 ` Greg Kroah-Hartman 2023-02-01 5:06 ` Greg Kroah-Hartman 2023-01-11 1:53 ` [PATCH v5 03/11] usb: musb: sunxi: Introduce config struct Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-27 20:22 ` Jernej Škrabec 2023-01-27 20:22 ` Jernej Škrabec 2023-01-11 1:53 ` [PATCH v5 04/11] ARM: dts: suniv: add USB-related device nodes Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-11 1:53 ` Andre Przywara [this message] 2023-01-11 1:53 ` [PATCH v5 05/11] ARM: dts: suniv: licheepi-nano: enable USB Andre Przywara 2023-01-11 1:53 ` [PATCH v5 06/11] dt-bindings: vendor-prefixes: add Source Parts Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-11 1:53 ` [PATCH v5 07/11] dt-binding: arm: sunxi: add compatible strings for PopStick v1.1 Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-11 1:53 ` [PATCH v5 08/11] ARM: dts: suniv: add device tree " Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-11 1:53 ` [PATCH v5 09/11] dt-bindings: vendor-prefixes: add Lctech name Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-11 1:53 ` [PATCH v5 10/11] dt-bindings: arm: sunxi: add compatible strings for Lctech Pi Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-11 1:53 ` [PATCH v5 11/11] ARM: dts: suniv: Add Lctech Pi F1C200s devicetree Andre Przywara 2023-01-11 1:53 ` Andre Przywara 2023-01-18 12:11 ` [PATCH v5 00/11] ARM: suniv: USB and two new boards support Andre Przywara 2023-01-18 12:11 ` Andre Przywara
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230111015332.172021-6-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=b-liu@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=jernej.skrabec@gmail.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-sunxi@lists.linux.dev \ --cc=linux-usb@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=samuel@sholland.org \ --cc=soc@kernel.org \ --cc=uwu@icenowy.me \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.