[PATCH] platform/x86: int3472/discrete: Ensure the clk/power enable pins are in output mode

[Hans de Goede <hdegoede@redhat.com>]

acpi_get_and_request_gpiod() does not take a gpio_lookup_flags argument
specifying that the pins direction should be initialized to a specific
value.

This means that in some cases the pins might be left in input mode, causing
the gpiod_set() calls made to enable the clk / regulator to not work.

One example of this problem is the clk-enable GPIO for the ov01a1s sensor
on a Dell Latitude 9420 being left in input mode causing the clk to
never get enabled.

Explicitly set the direction of the pins to output to fix this.

Fixes: 5de691bffe57 ("platform/x86: Add intel_skl_int3472 driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v4:
- Split out of the "int3472/media privacy LED support" series, so
  that this can be applied separately as it really is a bug-fix
---
 drivers/platform/x86/intel/int3472/clk_and_regulator.c | 3 +++
 drivers/platform/x86/intel/int3472/discrete.c          | 4 ++++
 2 files changed, 7 insertions(+)

diff --git a/drivers/platform/x86/intel/int3472/clk_and_regulator.c b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
index b2342b3d78c7..74dc2cff799e 100644
--- a/drivers/platform/x86/intel/int3472/clk_and_regulator.c
+++ b/drivers/platform/x86/intel/int3472/clk_and_regulator.c
@@ -181,6 +181,9 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 		return PTR_ERR(int3472->regulator.gpio);
 	}
 
+	/* Ensure the pin is in output mode and non-active state */
+	gpiod_direction_output(int3472->regulator.gpio, 0);
+
 	cfg.dev = &int3472->adev->dev;
 	cfg.init_data = &init_data;
 	cfg.ena_gpiod = int3472->regulator.gpio;
diff --git a/drivers/platform/x86/intel/int3472/discrete.c b/drivers/platform/x86/intel/int3472/discrete.c
index 974a132db651..c42c3faa2c32 100644
--- a/drivers/platform/x86/intel/int3472/discrete.c
+++ b/drivers/platform/x86/intel/int3472/discrete.c
@@ -168,6 +168,8 @@ static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472,
 			return (PTR_ERR(gpio));
 
 		int3472->clock.ena_gpio = gpio;
+		/* Ensure the pin is in output mode and non-active state */
+		gpiod_direction_output(int3472->clock.ena_gpio, 0);
 		break;
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 		gpio = acpi_get_and_request_gpiod(path, pin, "int3472,privacy-led");
@@ -175,6 +177,8 @@ static int skl_int3472_map_gpio_to_clk(struct int3472_discrete_device *int3472,
 			return (PTR_ERR(gpio));
 
 		int3472->clock.led_gpio = gpio;
+		/* Ensure the pin is in output mode and non-active state */
+		gpiod_direction_output(int3472->clock.led_gpio, 0);
 		break;
 	default:
 		dev_err(int3472->dev, "Invalid GPIO type 0x%02x for clock\n", type);
-- 
2.39.0