[PATCH 2/6] dt-bindings: phy: qcom,hdmi-phy-other: mark it as clock provider

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Eventually all HDMI PHYs are going to provide the HDMI PLL clock to the
MMCC. Add #clock-cells property required to provide the HDMI PLL clock to
other devices.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../devicetree/bindings/phy/qcom,hdmi-phy-other.yaml          | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
index 2c21e120ff8d..0c8f03b78608 100644
--- a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml
@@ -43,6 +43,9 @@ properties:
   vddio-supply:
     description: phandle to VDD I/O supply regulator
 
+  '#clock-cells':
+    const: 0
+
   '#phy-cells':
     const: 0
 
@@ -113,6 +116,7 @@ examples:
                   "hdmi_pll";
       reg = <0x4a00400 0x60>,
             <0x4a00500 0x100>;
+      #clock-cells = <0>;
       #phy-cells = <0>;
       power-domains = <&mmcc 1>;
       clock-names = "slave_iface", "pxo";
-- 
2.39.0