From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>, Abhinav Kumar <quic_abhinavk@quicinc.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Stephen Boyd <swboyd@chromium.org>, David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org Subject: [PATCH 3/6] drm/msm/hdmi: switch hdmi_pll_8960 to use parent_data Date: Thu, 19 Jan 2023 15:22:16 +0200 [thread overview] Message-ID: <20230119132219.2479775-4-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20230119132219.2479775-1-dmitry.baryshkov@linaro.org> Replace parent_names usage with parent_data. Note, that this makes the PLL default to board's `pxo_board' clock rather than just `pxo' clock, as we are on a way to deprecate the global cxo/pxo clocks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c index be4b0b67e797..c3e7ff45e52a 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c @@ -406,14 +406,14 @@ static const struct clk_ops hdmi_pll_ops = { .set_rate = hdmi_pll_set_rate, }; -static const char * const hdmi_pll_parents[] = { - "pxo", +static const struct clk_parent_data hdmi_pll_parents[] = { + { .fw_name = "pxo", .name = "pxo_board" }, }; static struct clk_init_data pll_init = { .name = "hdmi_pll", .ops = &hdmi_pll_ops, - .parent_names = hdmi_pll_parents, + .parent_data = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), .flags = CLK_IGNORE_UNUSED, }; -- 2.39.0
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Clark <robdclark@gmail.com>, Sean Paul <sean@poorly.run>, Abhinav Kumar <quic_abhinavk@quicinc.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: devicetree@vger.kernel.org, linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org, Stephen Boyd <swboyd@chromium.org>, freedreno@lists.freedesktop.org Subject: [PATCH 3/6] drm/msm/hdmi: switch hdmi_pll_8960 to use parent_data Date: Thu, 19 Jan 2023 15:22:16 +0200 [thread overview] Message-ID: <20230119132219.2479775-4-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20230119132219.2479775-1-dmitry.baryshkov@linaro.org> Replace parent_names usage with parent_data. Note, that this makes the PLL default to board's `pxo_board' clock rather than just `pxo' clock, as we are on a way to deprecate the global cxo/pxo clocks. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c index be4b0b67e797..c3e7ff45e52a 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_pll_8960.c @@ -406,14 +406,14 @@ static const struct clk_ops hdmi_pll_ops = { .set_rate = hdmi_pll_set_rate, }; -static const char * const hdmi_pll_parents[] = { - "pxo", +static const struct clk_parent_data hdmi_pll_parents[] = { + { .fw_name = "pxo", .name = "pxo_board" }, }; static struct clk_init_data pll_init = { .name = "hdmi_pll", .ops = &hdmi_pll_ops, - .parent_names = hdmi_pll_parents, + .parent_data = hdmi_pll_parents, .num_parents = ARRAY_SIZE(hdmi_pll_parents), .flags = CLK_IGNORE_UNUSED, }; -- 2.39.0
next prev parent reply other threads:[~2023-01-19 13:22 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-01-19 13:22 [PATCH 0/6] drm/msm/hdmi: integrate msm8960 HDMI PHY with DT clocks infrastructure Dmitry Baryshkov 2023-01-19 13:22 ` Dmitry Baryshkov 2023-01-19 13:22 ` [PATCH 1/6] dt-bindings: phy: qcom,hdmi-phy-other: use pxo clock Dmitry Baryshkov 2023-01-19 13:22 ` Dmitry Baryshkov 2023-01-26 11:20 ` Krzysztof Kozlowski 2023-01-26 11:20 ` Krzysztof Kozlowski 2023-01-19 13:22 ` [PATCH 2/6] dt-bindings: phy: qcom,hdmi-phy-other: mark it as clock provider Dmitry Baryshkov 2023-01-19 13:22 ` [PATCH 2/6] dt-bindings: phy: qcom, hdmi-phy-other: " Dmitry Baryshkov 2023-01-23 21:22 ` [PATCH 2/6] dt-bindings: phy: qcom,hdmi-phy-other: " Rob Herring 2023-01-23 21:22 ` Rob Herring 2023-01-19 13:22 ` Dmitry Baryshkov [this message] 2023-01-19 13:22 ` [PATCH 3/6] drm/msm/hdmi: switch hdmi_pll_8960 to use parent_data Dmitry Baryshkov 2023-01-19 13:58 ` Konrad Dybcio 2023-01-19 13:58 ` Konrad Dybcio 2023-01-19 13:22 ` [PATCH 4/6] drm/msm/hdmi: make hdmi_phy_8960 OF clk provider Dmitry Baryshkov 2023-01-19 13:22 ` Dmitry Baryshkov 2023-01-19 14:01 ` Konrad Dybcio 2023-01-19 14:01 ` Konrad Dybcio 2023-01-19 13:22 ` [PATCH 5/6] ARM: dts: qcom: apq8064: add #clock-cells to the HDMI PHY node Dmitry Baryshkov 2023-01-19 13:22 ` Dmitry Baryshkov 2023-01-19 13:22 ` [PATCH 6/6] ARM: dts: qcom: apq8064: use hdmi_phy for the MMCC's hdmipll clock Dmitry Baryshkov 2023-01-19 13:22 ` Dmitry Baryshkov 2023-01-19 14:12 ` Konrad Dybcio 2023-01-19 14:12 ` Konrad Dybcio 2023-01-26 19:00 ` [PATCH 0/6] drm/msm/hdmi: integrate msm8960 HDMI PHY with DT clocks infrastructure Dmitry Baryshkov 2023-01-26 19:00 ` Dmitry Baryshkov 2023-02-09 4:22 ` (subset) " Bjorn Andersson 2023-02-09 4:22 ` Bjorn Andersson -- strict thread matches above, loose matches on Subject: below -- 2022-09-09 13:20 [PATCH 0/6] drm/msm/hdmi: update hdmi_pll_8960 driver Dmitry Baryshkov 2022-09-09 13:20 ` [PATCH 3/6] drm/msm/hdmi: switch hdmi_pll_8960 to use parent_data Dmitry Baryshkov 2022-09-09 13:20 ` Dmitry Baryshkov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230119132219.2479775-4-dmitry.baryshkov@linaro.org \ --to=dmitry.baryshkov@linaro.org \ --cc=agross@kernel.org \ --cc=airlied@gmail.com \ --cc=andersson@kernel.org \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=quic_abhinavk@quicinc.com \ --cc=robdclark@gmail.com \ --cc=robh+dt@kernel.org \ --cc=sean@poorly.run \ --cc=swboyd@chromium.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.