From: Konrad Dybcio <konrad.dybcio@linaro.org> To: linux-arm-msm@vger.kernel.org, andersson@kernel.org, agross@kernel.org, krzysztof.kozlowski@linaro.org Cc: marijn.suijten@somainline.org, Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Clark <robdclark@gmail.com>, Abhinav Kumar <quic_abhinavk@quicinc.com>, Dmitry Baryshkov <dmitry.baryshkov@linaro.org>, Sean Paul <sean@poorly.run>, David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>, Douglas Anderson <dianders@chromium.org>, Loic Poulain <loic.poulain@linaro.org>, Neil Armstrong <neil.armstrong@linaro.org>, Rajeev Nandan <quic_rajeevny@quicinc.com>, Stephen Boyd <swboyd@chromium.org>, dri-devel@lists.freedesktop.org, freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org Subject: [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0 Date: Fri, 20 Jan 2023 22:00:53 +0100 [thread overview] Message-ID: <20230120210101.2146852-1-konrad.dybcio@linaro.org> (raw) v2.5.0 support was originally added for SC7280, but this hw is also present on SM8350, which has one more DSI host. Bump up the dsi count and fill in the register of the secondary host to allow it to probe. This should not have any adverse effects on SC7280, as the secondary CTRL will only be touched if it's defined, anyway. Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c index 33884ebd2f86..6d21f0b33411 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c @@ -223,8 +223,8 @@ static const struct msm_dsi_config sc7280_dsi_cfg = { .num_regulators = ARRAY_SIZE(sc7280_dsi_regulators), .bus_clk_names = dsi_sc7280_bus_clk_names, .num_bus_clks = ARRAY_SIZE(dsi_sc7280_bus_clk_names), - .io_start = { 0xae94000 }, - .num_dsi = 1, + .io_start = { 0xae94000, 0xae96000 }, + .num_dsi = 2, }; static const char * const dsi_qcm2290_bus_clk_names[] = { -- 2.39.1
WARNING: multiple messages have this Message-ID (diff)
From: Konrad Dybcio <konrad.dybcio@linaro.org> To: linux-arm-msm@vger.kernel.org, andersson@kernel.org, agross@kernel.org, krzysztof.kozlowski@linaro.org Cc: Neil Armstrong <neil.armstrong@linaro.org>, Loic Poulain <loic.poulain@linaro.org>, freedreno@lists.freedesktop.org, Abhinav Kumar <quic_abhinavk@quicinc.com>, dri-devel@lists.freedesktop.org, Douglas Anderson <dianders@chromium.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Rajeev Nandan <quic_rajeevny@quicinc.com>, Dmitry Baryshkov <dmitry.baryshkov@linaro.org>, marijn.suijten@somainline.org, Stephen Boyd <swboyd@chromium.org>, Sean Paul <sean@poorly.run>, linux-kernel@vger.kernel.org Subject: [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0 Date: Fri, 20 Jan 2023 22:00:53 +0100 [thread overview] Message-ID: <20230120210101.2146852-1-konrad.dybcio@linaro.org> (raw) v2.5.0 support was originally added for SC7280, but this hw is also present on SM8350, which has one more DSI host. Bump up the dsi count and fill in the register of the secondary host to allow it to probe. This should not have any adverse effects on SC7280, as the secondary CTRL will only be touched if it's defined, anyway. Fixes: 65c391b31994 ("drm/msm/dsi: Add DSI support for SC7280") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- drivers/gpu/drm/msm/dsi/dsi_cfg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/dsi/dsi_cfg.c b/drivers/gpu/drm/msm/dsi/dsi_cfg.c index 33884ebd2f86..6d21f0b33411 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_cfg.c +++ b/drivers/gpu/drm/msm/dsi/dsi_cfg.c @@ -223,8 +223,8 @@ static const struct msm_dsi_config sc7280_dsi_cfg = { .num_regulators = ARRAY_SIZE(sc7280_dsi_regulators), .bus_clk_names = dsi_sc7280_bus_clk_names, .num_bus_clks = ARRAY_SIZE(dsi_sc7280_bus_clk_names), - .io_start = { 0xae94000 }, - .num_dsi = 1, + .io_start = { 0xae94000, 0xae96000 }, + .num_dsi = 2, }; static const char * const dsi_qcm2290_bus_clk_names[] = { -- 2.39.1
next reply other threads:[~2023-01-20 21:01 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-01-20 21:00 Konrad Dybcio [this message] 2023-01-20 21:00 ` [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0 Konrad Dybcio 2023-01-20 21:00 ` [PATCH 2/8] arm64: dts: qcom: sm8350: Add missing #address/size-cells to DSIn Konrad Dybcio 2023-01-20 21:00 ` Konrad Dybcio 2023-01-21 8:46 ` Dmitry Baryshkov 2023-01-21 8:46 ` Dmitry Baryshkov 2023-01-20 21:00 ` [PATCH 3/8] arm64: dts: qcom: sm8350: Fix DSI1 interrupt Konrad Dybcio 2023-01-20 21:00 ` Konrad Dybcio 2023-01-21 8:46 ` Dmitry Baryshkov 2023-01-21 8:46 ` Dmitry Baryshkov 2023-01-20 21:00 ` [PATCH 4/8] arm64: dts: qcom: sm8350: Feed DSI1 PHY clocks to DISPCC Konrad Dybcio 2023-01-20 21:00 ` Konrad Dybcio 2023-01-21 8:47 ` Dmitry Baryshkov 2023-01-21 8:47 ` Dmitry Baryshkov 2023-01-20 21:00 ` [PATCH 5/8] arm64: dts: qcom: sm8350: Fix DSI PHY compatibles Konrad Dybcio 2023-01-20 21:00 ` Konrad Dybcio 2023-01-21 8:47 ` Dmitry Baryshkov 2023-01-21 8:47 ` Dmitry Baryshkov 2023-01-20 21:00 ` [PATCH 6/8] arm64: dts: qcom: sm8350: Fix DSI PLL size Konrad Dybcio 2023-01-20 21:00 ` Konrad Dybcio 2023-01-21 8:47 ` Dmitry Baryshkov 2023-01-21 8:47 ` Dmitry Baryshkov 2023-01-20 21:00 ` [PATCH 7/8] arm64: dts: qcom: sm8350: Add mdss_ prefix to DSIn out labels Konrad Dybcio 2023-01-20 21:00 ` Konrad Dybcio 2023-01-21 8:48 ` Dmitry Baryshkov 2023-01-21 8:48 ` Dmitry Baryshkov 2023-01-20 21:01 ` [PATCH 8/8] arm64: dts: qcom: sm8350: Hook up DSI1 to MDP Konrad Dybcio 2023-01-20 21:01 ` Konrad Dybcio 2023-01-21 8:48 ` Dmitry Baryshkov 2023-01-21 8:48 ` Dmitry Baryshkov 2023-01-21 8:42 ` [PATCH 1/8] drm/msm/dsi: Allow 2 CTRLs on v2.5.0 Dmitry Baryshkov 2023-01-21 8:42 ` Dmitry Baryshkov 2023-01-21 10:18 ` Dmitry Baryshkov 2023-01-21 10:18 ` Dmitry Baryshkov 2023-01-30 23:46 ` (subset) " Bjorn Andersson 2023-01-30 23:46 ` Bjorn Andersson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230120210101.2146852-1-konrad.dybcio@linaro.org \ --to=konrad.dybcio@linaro.org \ --cc=agross@kernel.org \ --cc=airlied@gmail.com \ --cc=andersson@kernel.org \ --cc=daniel@ffwll.ch \ --cc=dianders@chromium.org \ --cc=dmitry.baryshkov@linaro.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=krzysztof.kozlowski@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=loic.poulain@linaro.org \ --cc=marijn.suijten@somainline.org \ --cc=neil.armstrong@linaro.org \ --cc=quic_abhinavk@quicinc.com \ --cc=quic_rajeevny@quicinc.com \ --cc=robdclark@gmail.com \ --cc=sean@poorly.run \ --cc=swboyd@chromium.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.