From: Bjorn Andersson <quic_bjorande@quicinc.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Mark Brown <broonie@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-msm@vger.kernel.org>
Subject: [PATCH v2 3/3] arm64: dts: qcom: sa8295p-adp: Add max20411 on i2c12
Date: Tue, 24 Jan 2023 10:44:40 -0800 [thread overview]
Message-ID: <20230124184440.1421074-4-quic_bjorande@quicinc.com> (raw)
In-Reply-To: <20230124184440.1421074-1-quic_bjorande@quicinc.com>
From: Bjorn Andersson <bjorn.andersson@linaro.org>
The SA8295P ADP has a Maxim max20411 step-down converter on i2c12.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
---
Changes since v1:
- i2c node had changed name
arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 41 ++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index bb4270e8f551..642000d95812 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -266,6 +266,27 @@ &dispcc1 {
status = "okay";
};
+&i2c12 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c12_state>;
+
+ status = "okay";
+
+ vdd_gfx: regulator@39 {
+ compatible = "maxim,max20411";
+ reg = <0x39>;
+
+ regulator-name = "vdd_gfx";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <968750>;
+
+ enable-gpios = <&pmm8540a_gpios 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vdd_gfx_enable_state>;
+ };
+};
+
&mdss0 {
status = "okay";
};
@@ -476,6 +497,10 @@ &pcie4_phy {
status = "okay";
};
+&qup1 {
+ status = "okay";
+};
+
&qup2 {
status = "okay";
};
@@ -636,7 +661,23 @@ &xo_board_clk {
/* PINCTRL */
+&pmm8540a_gpios {
+ vdd_gfx_enable_state: vdd-gfx-enable-state {
+ pins = "gpio2";
+ function = "normal";
+ output-enable;
+ };
+};
+
&tlmm {
+ i2c12_state: i2c12-state {
+ pins = "gpio0", "gpio1";
+ function = "qup12";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
pcie2a_default: pcie2a-default-state {
clkreq-n-pins {
pins = "gpio142";
--
2.25.1
next prev parent reply other threads:[~2023-01-24 18:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-24 18:44 [PATCH v2 0/3] regulator: Add Maxim MAX20411 support Bjorn Andersson
2023-01-24 18:44 ` [PATCH v2 1/3] regulator: dt-bindings: Describe Maxim MAX20411 Bjorn Andersson
2023-01-24 18:44 ` [PATCH v2 2/3] regulator: Introduce Maxim MAX20411 Step-Down converter Bjorn Andersson
2023-01-24 18:44 ` Bjorn Andersson [this message]
2023-01-26 22:54 ` [PATCH v2 3/3] arm64: dts: qcom: sa8295p-adp: Add max20411 on i2c12 Andrew Halaney
2023-01-26 23:35 ` Konrad Dybcio
2023-01-26 23:43 ` Andrew Halaney
2023-01-30 3:57 ` Bjorn Andersson
2023-01-27 9:55 ` Johan Hovold
2023-01-30 3:56 ` Bjorn Andersson
2023-01-26 0:29 ` [PATCH v2 0/3] regulator: Add Maxim MAX20411 support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230124184440.1421074-4-quic_bjorande@quicinc.com \
--to=quic_bjorande@quicinc.com \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.