From: Sebastian Reichel <sebastian.reichel@collabora.com> To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Lee Jones <lee@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Alessandro Zummo <a.zummo@towertech.it>, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel <sebastian.reichel@collabora.com>, kernel@collabora.com Subject: [PATCHv6 06/11] mfd: rk8xx-i2c: use device_get_match_data Date: Fri, 27 Jan 2023 19:12:39 +0100 [thread overview] Message-ID: <20230127181244.160887-7-sebastian.reichel@collabora.com> (raw) In-Reply-To: <20230127181244.160887-1-sebastian.reichel@collabora.com> Simplify the device identification logic by supplying the relevant information via of_match_data. This also removes the dev_info() printing the chip version, since that's supplied by the match data now. Due to lack of hardware this change is compile-tested only. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- drivers/mfd/rk8xx-core.c | 2 - drivers/mfd/rk8xx-i2c.c | 89 +++++++++++++++++----------------------- 2 files changed, 37 insertions(+), 54 deletions(-) diff --git a/drivers/mfd/rk8xx-core.c b/drivers/mfd/rk8xx-core.c index c52f5fa1a4da..21c6484a951c 100644 --- a/drivers/mfd/rk8xx-core.c +++ b/drivers/mfd/rk8xx-core.c @@ -596,8 +596,6 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap return -EINVAL; } - dev_info(dev, "chip id: 0x%x\n", (unsigned int)rk808->variant); - if (!irq) return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n"); diff --git a/drivers/mfd/rk8xx-i2c.c b/drivers/mfd/rk8xx-i2c.c index 6d121b589fec..2822bfa8a04a 100644 --- a/drivers/mfd/rk8xx-i2c.c +++ b/drivers/mfd/rk8xx-i2c.c @@ -16,6 +16,11 @@ #include <linux/of.h> #include <linux/regmap.h> +struct rk8xx_i2c_platform_data { + const struct regmap_config *regmap_cfg; + int variant; +}; + static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg) { /* @@ -103,66 +108,46 @@ static const struct regmap_config rk817_regmap_config = { .volatile_reg = rk817_is_volatile_reg, }; -static int rk8xx_i2c_get_variant(struct i2c_client *client) -{ - u8 pmic_id_msb, pmic_id_lsb; - int msb, lsb; - - if (of_device_is_compatible(client->dev.of_node, "rockchip,rk817") || - of_device_is_compatible(client->dev.of_node, "rockchip,rk809")) { - pmic_id_msb = RK817_ID_MSB; - pmic_id_lsb = RK817_ID_LSB; - } else { - pmic_id_msb = RK808_ID_MSB; - pmic_id_lsb = RK808_ID_LSB; - } +static const struct rk8xx_i2c_platform_data rk805_data = { + .regmap_cfg = &rk805_regmap_config, + .variant = RK805_ID, +}; + +static const struct rk8xx_i2c_platform_data rk808_data = { + .regmap_cfg = &rk808_regmap_config, + .variant = RK808_ID, +}; - /* Read chip variant */ - msb = i2c_smbus_read_byte_data(client, pmic_id_msb); - if (msb < 0) - return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n"); +static const struct rk8xx_i2c_platform_data rk809_data = { + .regmap_cfg = &rk817_regmap_config, + .variant = RK809_ID, +}; - lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb); - if (lsb < 0) - return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n"); +static const struct rk8xx_i2c_platform_data rk817_data = { + .regmap_cfg = &rk817_regmap_config, + .variant = RK817_ID, +}; - return ((msb << 8) | lsb) & RK8XX_ID_MSK; -} +static const struct rk8xx_i2c_platform_data rk818_data = { + .regmap_cfg = &rk818_regmap_config, + .variant = RK818_ID, +}; static int rk8xx_i2c_probe(struct i2c_client *client) { - const struct regmap_config *regmap_cfg; + const struct rk8xx_i2c_platform_data *data; struct regmap *regmap; - int variant; - variant = rk8xx_i2c_get_variant(client); - if (variant < 0) - return variant; - - switch (variant) { - case RK805_ID: - regmap_cfg = &rk805_regmap_config; - break; - case RK808_ID: - regmap_cfg = &rk808_regmap_config; - break; - case RK818_ID: - regmap_cfg = &rk818_regmap_config; - break; - case RK809_ID: - case RK817_ID: - regmap_cfg = &rk817_regmap_config; - break; - default: - return dev_err_probe(&client->dev, -EINVAL, "Unsupported RK8XX ID %x\n", variant); - } + data = device_get_match_data(&client->dev); + if (!data) + return -ENODEV; - regmap = devm_regmap_init_i2c(client, regmap_cfg); + regmap = devm_regmap_init_i2c(client, data->regmap_cfg); if (IS_ERR(regmap)) return dev_err_probe(&client->dev, PTR_ERR(regmap), "regmap initialization failed\n"); - return rk8xx_probe(&client->dev, variant, client->irq, regmap); + return rk8xx_probe(&client->dev, data->variant, client->irq, regmap); } static void rk8xx_i2c_shutdown(struct i2c_client *client) @@ -173,11 +158,11 @@ static void rk8xx_i2c_shutdown(struct i2c_client *client) static SIMPLE_DEV_PM_OPS(rk8xx_i2c_pm_ops, rk8xx_suspend, rk8xx_resume); static const struct of_device_id rk8xx_i2c_of_match[] = { - { .compatible = "rockchip,rk805" }, - { .compatible = "rockchip,rk808" }, - { .compatible = "rockchip,rk809" }, - { .compatible = "rockchip,rk817" }, - { .compatible = "rockchip,rk818" }, + { .compatible = "rockchip,rk805", .data = &rk805_data }, + { .compatible = "rockchip,rk808", .data = &rk808_data }, + { .compatible = "rockchip,rk809", .data = &rk809_data }, + { .compatible = "rockchip,rk817", .data = &rk817_data }, + { .compatible = "rockchip,rk818", .data = &rk818_data }, { }, }; MODULE_DEVICE_TABLE(of, rk8xx_i2c_of_match); -- 2.39.0
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sebastian.reichel@collabora.com> To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Lee Jones <lee@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Alessandro Zummo <a.zummo@towertech.it>, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel <sebastian.reichel@collabora.com>, kernel@collabora.com Subject: [PATCHv6 06/11] mfd: rk8xx-i2c: use device_get_match_data Date: Fri, 27 Jan 2023 19:12:39 +0100 [thread overview] Message-ID: <20230127181244.160887-7-sebastian.reichel@collabora.com> (raw) In-Reply-To: <20230127181244.160887-1-sebastian.reichel@collabora.com> Simplify the device identification logic by supplying the relevant information via of_match_data. This also removes the dev_info() printing the chip version, since that's supplied by the match data now. Due to lack of hardware this change is compile-tested only. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- drivers/mfd/rk8xx-core.c | 2 - drivers/mfd/rk8xx-i2c.c | 89 +++++++++++++++++----------------------- 2 files changed, 37 insertions(+), 54 deletions(-) diff --git a/drivers/mfd/rk8xx-core.c b/drivers/mfd/rk8xx-core.c index c52f5fa1a4da..21c6484a951c 100644 --- a/drivers/mfd/rk8xx-core.c +++ b/drivers/mfd/rk8xx-core.c @@ -596,8 +596,6 @@ int rk8xx_probe(struct device *dev, int variant, unsigned int irq, struct regmap return -EINVAL; } - dev_info(dev, "chip id: 0x%x\n", (unsigned int)rk808->variant); - if (!irq) return dev_err_probe(dev, -EINVAL, "No interrupt support, no core IRQ\n"); diff --git a/drivers/mfd/rk8xx-i2c.c b/drivers/mfd/rk8xx-i2c.c index 6d121b589fec..2822bfa8a04a 100644 --- a/drivers/mfd/rk8xx-i2c.c +++ b/drivers/mfd/rk8xx-i2c.c @@ -16,6 +16,11 @@ #include <linux/of.h> #include <linux/regmap.h> +struct rk8xx_i2c_platform_data { + const struct regmap_config *regmap_cfg; + int variant; +}; + static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg) { /* @@ -103,66 +108,46 @@ static const struct regmap_config rk817_regmap_config = { .volatile_reg = rk817_is_volatile_reg, }; -static int rk8xx_i2c_get_variant(struct i2c_client *client) -{ - u8 pmic_id_msb, pmic_id_lsb; - int msb, lsb; - - if (of_device_is_compatible(client->dev.of_node, "rockchip,rk817") || - of_device_is_compatible(client->dev.of_node, "rockchip,rk809")) { - pmic_id_msb = RK817_ID_MSB; - pmic_id_lsb = RK817_ID_LSB; - } else { - pmic_id_msb = RK808_ID_MSB; - pmic_id_lsb = RK808_ID_LSB; - } +static const struct rk8xx_i2c_platform_data rk805_data = { + .regmap_cfg = &rk805_regmap_config, + .variant = RK805_ID, +}; + +static const struct rk8xx_i2c_platform_data rk808_data = { + .regmap_cfg = &rk808_regmap_config, + .variant = RK808_ID, +}; - /* Read chip variant */ - msb = i2c_smbus_read_byte_data(client, pmic_id_msb); - if (msb < 0) - return dev_err_probe(&client->dev, msb, "failed to read the chip id MSB\n"); +static const struct rk8xx_i2c_platform_data rk809_data = { + .regmap_cfg = &rk817_regmap_config, + .variant = RK809_ID, +}; - lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb); - if (lsb < 0) - return dev_err_probe(&client->dev, lsb, "failed to read the chip id LSB\n"); +static const struct rk8xx_i2c_platform_data rk817_data = { + .regmap_cfg = &rk817_regmap_config, + .variant = RK817_ID, +}; - return ((msb << 8) | lsb) & RK8XX_ID_MSK; -} +static const struct rk8xx_i2c_platform_data rk818_data = { + .regmap_cfg = &rk818_regmap_config, + .variant = RK818_ID, +}; static int rk8xx_i2c_probe(struct i2c_client *client) { - const struct regmap_config *regmap_cfg; + const struct rk8xx_i2c_platform_data *data; struct regmap *regmap; - int variant; - variant = rk8xx_i2c_get_variant(client); - if (variant < 0) - return variant; - - switch (variant) { - case RK805_ID: - regmap_cfg = &rk805_regmap_config; - break; - case RK808_ID: - regmap_cfg = &rk808_regmap_config; - break; - case RK818_ID: - regmap_cfg = &rk818_regmap_config; - break; - case RK809_ID: - case RK817_ID: - regmap_cfg = &rk817_regmap_config; - break; - default: - return dev_err_probe(&client->dev, -EINVAL, "Unsupported RK8XX ID %x\n", variant); - } + data = device_get_match_data(&client->dev); + if (!data) + return -ENODEV; - regmap = devm_regmap_init_i2c(client, regmap_cfg); + regmap = devm_regmap_init_i2c(client, data->regmap_cfg); if (IS_ERR(regmap)) return dev_err_probe(&client->dev, PTR_ERR(regmap), "regmap initialization failed\n"); - return rk8xx_probe(&client->dev, variant, client->irq, regmap); + return rk8xx_probe(&client->dev, data->variant, client->irq, regmap); } static void rk8xx_i2c_shutdown(struct i2c_client *client) @@ -173,11 +158,11 @@ static void rk8xx_i2c_shutdown(struct i2c_client *client) static SIMPLE_DEV_PM_OPS(rk8xx_i2c_pm_ops, rk8xx_suspend, rk8xx_resume); static const struct of_device_id rk8xx_i2c_of_match[] = { - { .compatible = "rockchip,rk805" }, - { .compatible = "rockchip,rk808" }, - { .compatible = "rockchip,rk809" }, - { .compatible = "rockchip,rk817" }, - { .compatible = "rockchip,rk818" }, + { .compatible = "rockchip,rk805", .data = &rk805_data }, + { .compatible = "rockchip,rk808", .data = &rk808_data }, + { .compatible = "rockchip,rk809", .data = &rk809_data }, + { .compatible = "rockchip,rk817", .data = &rk817_data }, + { .compatible = "rockchip,rk818", .data = &rk818_data }, { }, }; MODULE_DEVICE_TABLE(of, rk8xx_i2c_of_match); -- 2.39.0 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2023-01-27 18:13 UTC|newest] Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-01-27 18:12 [PATCHv6 00/11] Introduce RK806 Support Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-01-27 18:12 ` [PATCHv6 01/11] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-01-27 18:12 ` [PATCHv6 02/11] mfd: rk808: convert to device managed resources Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-01-27 18:12 ` [PATCHv6 03/11] mfd: rk808: use dev_err_probe Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-01-27 18:12 ` [PATCHv6 04/11] mfd: rk808: replace 'struct i2c_client' with 'struct device' Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-01-27 18:12 ` [PATCHv6 05/11] mfd: rk808: split into core and i2c Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-01-27 20:06 ` Alexandre Belloni 2023-01-27 20:06 ` Alexandre Belloni 2023-02-04 13:52 ` Lee Jones 2023-02-04 13:52 ` Lee Jones 2023-02-04 14:01 ` Lee Jones 2023-02-04 14:01 ` Lee Jones 2023-02-05 1:06 ` Sebastian Reichel 2023-02-05 1:06 ` Sebastian Reichel 2023-02-06 18:47 ` Lee Jones 2023-02-06 18:47 ` Lee Jones 2023-03-02 16:24 ` Lee Jones 2023-03-02 16:24 ` Lee Jones 2023-01-27 18:12 ` Sebastian Reichel [this message] 2023-01-27 18:12 ` [PATCHv6 06/11] mfd: rk8xx-i2c: use device_get_match_data Sebastian Reichel 2023-03-02 16:50 ` Lee Jones 2023-03-02 16:50 ` Lee Jones 2023-01-27 18:12 ` [PATCHv6 07/11] dt-bindings: mfd: add rk806 binding Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-01-27 18:12 ` [PATCHv6 08/11] mfd: rk8xx: add rk806 support Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-03-02 17:52 ` Lee Jones 2023-03-02 17:52 ` Lee Jones 2023-01-27 18:12 ` [PATCHv6 09/11] pinctrl: rk805: add rk806 pinctrl support Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-01-30 22:31 ` Linus Walleij 2023-01-30 22:31 ` Linus Walleij 2023-01-30 23:36 ` Sebastian Reichel 2023-01-30 23:36 ` Sebastian Reichel 2023-03-02 16:22 ` Lee Jones 2023-03-02 16:22 ` Lee Jones 2023-03-06 12:37 ` Linus Walleij 2023-03-06 12:37 ` Linus Walleij 2023-01-27 18:12 ` [PATCHv6 10/11] regulator: expose regulator_find_closest_bigger Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel 2023-01-27 18:12 ` [PATCHv6 11/11] regulator: rk808: add rk806 support Sebastian Reichel 2023-01-27 18:12 ` Sebastian Reichel
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230127181244.160887-7-sebastian.reichel@collabora.com \ --to=sebastian.reichel@collabora.com \ --cc=a.zummo@towertech.it \ --cc=alexandre.belloni@bootlin.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=kernel@collabora.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lee@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linus.walleij@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.