[PATCH v2 3/4] media: i2c: ov2685: Add controls from fwnode

[Luca Weiss <luca@z3ntu.xyz>]

Add V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION
controls to the ov2685 driver by attempting to parse them from firmware.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
---
 drivers/media/i2c/ov2685.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/media/i2c/ov2685.c b/drivers/media/i2c/ov2685.c
index 844a91dbc8e5..e9e59a3ed7d5 100644
--- a/drivers/media/i2c/ov2685.c
+++ b/drivers/media/i2c/ov2685.c
@@ -17,6 +17,7 @@
 #include <media/media-entity.h>
 #include <media/v4l2-async.h>
 #include <media/v4l2-ctrls.h>
+#include <media/v4l2-fwnode.h>
 #include <media/v4l2-subdev.h>
 
 #define CHIP_ID				0x2685
@@ -613,13 +614,14 @@ static int ov2685_initialize_controls(struct ov2685 *ov2685)
 	const struct ov2685_mode *mode;
 	struct v4l2_ctrl_handler *handler;
 	struct v4l2_ctrl *ctrl;
+	struct v4l2_fwnode_device_properties props;
 	u64 exposure_max;
 	u32 pixel_rate, h_blank;
 	int ret;
 
 	handler = &ov2685->ctrl_handler;
 	mode = ov2685->cur_mode;
-	ret = v4l2_ctrl_handler_init(handler, 8);
+	ret = v4l2_ctrl_handler_init(handler, 10);
 	if (ret)
 		return ret;
 	handler->lock = &ov2685->mutex;
@@ -661,6 +663,15 @@ static int ov2685_initialize_controls(struct ov2685 *ov2685)
 				ARRAY_SIZE(ov2685_test_pattern_menu) - 1,
 				0, 0, ov2685_test_pattern_menu);
 
+	/* set properties from fwnode (e.g. rotation, orientation) */
+	ret = v4l2_fwnode_device_parse(&ov2685->client->dev, &props);
+	if (ret)
+		goto err_free_handler;
+
+	ret = v4l2_ctrl_new_fwnode_properties(handler, &ov2685_ctrl_ops, &props);
+	if (ret)
+		goto err_free_handler;
+
 	if (handler->error) {
 		ret = handler->error;
 		dev_err(&ov2685->client->dev,

-- 
2.39.1