All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Stephan Gerhold <stephan@gerhold.net>,
	Richard Acayan <mailingradian@gmail.com>,
	Vinod Koul <vkoul@kernel.org>,
	krishna Lanka <quic_vamslank@quicinc.com>,
	Iskren Chernev <me@iskren.info>,
	Martin Botka <martin.botka@somainline.org>,
	Abel Vesa <abel.vesa@linaro.org>,
	linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 7/7] dt-bindings: pinctrl: qcom: correct gpio-ranges in examples
Date: Wed,  1 Feb 2023 16:30:19 +0100	[thread overview]
Message-ID: <20230201153019.269718-7-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20230201153019.269718-1-krzysztof.kozlowski@linaro.org>

Correct the number of GPIOs in gpio-ranges to match reality.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml        | 2 +-
 .../devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml         | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml | 2 +-
 .../devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml        | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml  | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml | 2 +-
 .../devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml        | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml | 2 +-
 Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml | 2 +-
 11 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
index f33792a1af6c..77a5aaefddbe 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml
@@ -138,7 +138,7 @@ examples:
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 120>;
+        gpio-ranges = <&tlmm 0 0 119>;
         wakeup-parent = <&pdc>;
 
         dp_hot_plug_det: dp-hot-plug-det-state {
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
index 97b27d6835e9..854bbb5b6f5d 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sc8280xp-tlmm.yaml
@@ -128,7 +128,7 @@ examples:
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 230>;
+        gpio-ranges = <&tlmm 0 0 228>;
 
         gpio-wo-subnode-state {
             pins = "gpio1";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
index f586b3aa138e..03c7b5c97599 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm670-tlmm.yaml
@@ -119,7 +119,7 @@ examples:
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 151>;
+        gpio-ranges = <&tlmm 0 0 150>;
 
         qup-i2c9-state {
             pins = "gpio6", "gpio7";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
index 23d7c030fec0..a08e4557d8b7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdm845-pinctrl.yaml
@@ -134,7 +134,7 @@ examples:
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 151>;
+        gpio-ranges = <&tlmm 0 0 150>;
         wakeup-parent = <&pdc_intc>;
 
         ap-suspend-l-hog {
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
index 89c5562583d1..96375f58fa22 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-tlmm.yaml
@@ -140,7 +140,7 @@ examples:
         reg = <0x03000000 0xdc2000>;
         gpio-controller;
         #gpio-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 109>;
+        gpio-ranges = <&tlmm 0 0 108>;
         interrupt-controller;
         #interrupt-cells = <2>;
         interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
index 29325483cd2b..d35db4f4581b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml
@@ -121,7 +121,7 @@ examples:
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 114>;
+        gpio-ranges = <&tlmm 0 0 113>;
 
         sdc2_on_state: sdc2-on-state {
             clk-pins {
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
index c9bc4893e8e8..83848950cc3b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -125,7 +125,7 @@ examples:
         reg-names = "west", "south", "east";
         interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
         gpio-controller;
-        gpio-ranges = <&tlmm 0 0 134>;
+        gpio-ranges = <&tlmm 0 0 133>;
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
index d95935fcc8b5..3fe1f1668fbc 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6350-tlmm.yaml
@@ -142,7 +142,7 @@ examples:
         #gpio-cells = <2>;
         interrupt-controller;
         #interrupt-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 157>;
+        gpio-ranges = <&tlmm 0 0 156>;
 
         gpio-wo-subnode-state {
             pins = "gpio1";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
index 4376a9bd4d70..4c9ad9079e69 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8150-pinctrl.yaml
@@ -136,7 +136,7 @@ examples:
               <0x03d00000 0x300000>;
         reg-names = "west", "east", "north", "south";
         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-        gpio-ranges = <&tlmm 0 0 176>;
+        gpio-ranges = <&tlmm 0 0 175>;
         gpio-controller;
         #gpio-cells = <2>;
         interrupt-controller;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
index 56c8046f1be0..c4cec40cbb92 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8450-tlmm.yaml
@@ -124,7 +124,7 @@ examples:
         reg = <0x0f100000 0x300000>;
         gpio-controller;
         #gpio-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 211>;
+        gpio-ranges = <&tlmm 0 0 210>;
         interrupt-controller;
         #interrupt-cells = <2>;
         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
index a457425ba112..6ecc1ad6ccd4 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml
@@ -136,7 +136,7 @@ examples:
         reg = <0x0f100000 0x300000>;
         gpio-controller;
         #gpio-cells = <2>;
-        gpio-ranges = <&tlmm 0 0 211>;
+        gpio-ranges = <&tlmm 0 0 210>;
         interrupt-controller;
         #interrupt-cells = <2>;
         interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
-- 
2.34.1


  parent reply	other threads:[~2023-02-01 15:31 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-01 15:30 [PATCH 1/7] dt-bindings: pinctrl: qcom,msm8226: correct GPIO name pattern Krzysztof Kozlowski
2023-02-01 15:30 ` [PATCH 2/7] dt-bindings: pinctrl: qcom,msm8909: correct GPIO name pattern and example Krzysztof Kozlowski
2023-02-01 15:47   ` Stephan Gerhold
2023-02-01 15:30 ` [PATCH 3/7] dt-bindings: pinctrl: qcom,sm6375: " Krzysztof Kozlowski
2023-02-01 15:30 ` [PATCH 4/7] dt-bindings: pinctrl: qcom,msm8953: correct GPIO name pattern Krzysztof Kozlowski
2023-02-01 15:30 ` [PATCH 5/7] dt-bindings: pinctrl: qcom,sdx55: " Krzysztof Kozlowski
2023-02-01 15:30 ` [PATCH 6/7] dt-bindings: pinctrl: qcom,msm8994: correct number of GPIOs Krzysztof Kozlowski
2023-02-01 15:30 ` Krzysztof Kozlowski [this message]
2023-02-01 16:07   ` [PATCH 7/7] dt-bindings: pinctrl: qcom: correct gpio-ranges in examples Stephan Gerhold
2023-02-01 16:31     ` Stephan Gerhold
2023-02-02  9:38       ` Krzysztof Kozlowski
2023-02-02 10:39   ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230201153019.269718-7-krzysztof.kozlowski@linaro.org \
    --to=krzysztof.kozlowski@linaro.org \
    --cc=abel.vesa@linaro.org \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@linaro.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mailingradian@gmail.com \
    --cc=martin.botka@somainline.org \
    --cc=me@iskren.info \
    --cc=quic_vamslank@quicinc.com \
    --cc=robh+dt@kernel.org \
    --cc=stephan@gerhold.net \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.