All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
	Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 05/11] xhci: cleanup xhci_hub_control port references
Date: Thu,  2 Feb 2023 17:04:59 +0200	[thread overview]
Message-ID: <20230202150505.618915-6-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20230202150505.618915-1-mathias.nyman@linux.intel.com>

Both port number and port structure of a port are referred to several
times when handing hub requests in xhci.

Use more suitable data types and readable names for these.
Cleanup only, no functional changes

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci-hub.c | 123 ++++++++++++++++++------------------
 1 file changed, 63 insertions(+), 60 deletions(-)

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 7750a5eed435..181c070d6a99 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1209,11 +1209,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 	u16 test_mode = 0;
 	struct xhci_hub *rhub;
 	struct xhci_port **ports;
+	struct xhci_port *port;
+	int portnum1;
 
 	rhub = xhci_get_rhub(hcd);
 	ports = rhub->ports;
 	max_ports = rhub->num_ports;
 	bus_state = &rhub->bus_state;
+	portnum1 = wIndex & 0xff;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	switch (typeReq) {
@@ -1247,10 +1250,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		return retval;
 	case GetPortStatus:
-		if (!wIndex || wIndex > max_ports)
+		if (!portnum1 || portnum1 > max_ports)
 			goto error;
+
 		wIndex--;
-		temp = readl(ports[wIndex]->addr);
+		port = ports[portnum1 - 1];
+		temp = readl(port->addr);
 		if (temp == ~(u32)0) {
 			xhci_hc_died(xhci);
 			retval = -ENODEV;
@@ -1263,7 +1268,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			goto error;
 
 		xhci_dbg(xhci, "Get port status %d-%d read: 0x%x, return 0x%x",
-			 hcd->self.busnum, wIndex + 1, temp, status);
+			 hcd->self.busnum, portnum1, temp, status);
 
 		put_unaligned(cpu_to_le32(status), (__le32 *) buf);
 		/* if USB 3.1 extended port status return additional 4 bytes */
@@ -1275,7 +1280,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				retval = -EINVAL;
 				break;
 			}
-			port_li = readl(ports[wIndex]->addr + PORTLI);
+			port_li = readl(port->addr + PORTLI);
 			status = xhci_get_ext_port_status(temp, port_li);
 			put_unaligned_le32(status, &buf[4]);
 		}
@@ -1289,11 +1294,14 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			test_mode = (wIndex & 0xff00) >> 8;
 		/* The MSB of wIndex is the U1/U2 timeout */
 		timeout = (wIndex & 0xff00) >> 8;
+
 		wIndex &= 0xff;
-		if (!wIndex || wIndex > max_ports)
+		if (!portnum1 || portnum1 > max_ports)
 			goto error;
+
+		port = ports[portnum1 - 1];
 		wIndex--;
-		temp = readl(ports[wIndex]->addr);
+		temp = readl(port->addr);
 		if (temp == ~(u32)0) {
 			xhci_hc_died(xhci);
 			retval = -ENODEV;
@@ -1303,11 +1311,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		/* FIXME: What new port features do we need to support? */
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			temp = readl(ports[wIndex]->addr);
+			temp = readl(port->addr);
 			if ((temp & PORT_PLS_MASK) != XDEV_U0) {
 				/* Resume the port to U0 first */
-				xhci_set_link_state(xhci, ports[wIndex],
-							XDEV_U0);
+				xhci_set_link_state(xhci, port, XDEV_U0);
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				msleep(10);
 				spin_lock_irqsave(&xhci->lock, flags);
@@ -1316,16 +1323,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			 * a port unless the port reports that it is in the
 			 * enabled (PED = ‘1’,PLS < ‘3’) state.
 			 */
-			temp = readl(ports[wIndex]->addr);
+			temp = readl(port->addr);
 			if ((temp & PORT_PE) == 0 || (temp & PORT_RESET)
 				|| (temp & PORT_PLS_MASK) >= XDEV_U3) {
 				xhci_warn(xhci, "USB core suspending port %d-%d not in U0/U1/U2\n",
-					  hcd->self.busnum, wIndex + 1);
+					  hcd->self.busnum, portnum1);
 				goto error;
 			}
 
 			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					wIndex + 1);
+							    portnum1);
 			if (!slot_id) {
 				xhci_warn(xhci, "slot_id is zero\n");
 				goto error;
@@ -1335,21 +1342,21 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			xhci_stop_device(xhci, slot_id, 1);
 			spin_lock_irqsave(&xhci->lock, flags);
 
-			xhci_set_link_state(xhci, ports[wIndex], XDEV_U3);
+			xhci_set_link_state(xhci, port, XDEV_U3);
 
 			spin_unlock_irqrestore(&xhci->lock, flags);
 			msleep(10); /* wait device to enter */
 			spin_lock_irqsave(&xhci->lock, flags);
 
-			temp = readl(ports[wIndex]->addr);
+			temp = readl(port->addr);
 			bus_state->suspended_ports |= 1 << wIndex;
 			break;
 		case USB_PORT_FEAT_LINK_STATE:
-			temp = readl(ports[wIndex]->addr);
+			temp = readl(port->addr);
 			/* Disable port */
 			if (link_state == USB_SS_PORT_LS_SS_DISABLED) {
 				xhci_dbg(xhci, "Disable port %d-%d\n",
-					 hcd->self.busnum, wIndex + 1);
+					 hcd->self.busnum, portnum1);
 				temp = xhci_port_state_to_neutral(temp);
 				/*
 				 * Clear all change bits, so that we get a new
@@ -1358,18 +1365,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				temp |= PORT_CSC | PORT_PEC | PORT_WRC |
 					PORT_OCC | PORT_RC | PORT_PLC |
 					PORT_CEC;
-				writel(temp | PORT_PE, ports[wIndex]->addr);
-				temp = readl(ports[wIndex]->addr);
+				writel(temp | PORT_PE, port->addr);
+				temp = readl(port->addr);
 				break;
 			}
 
 			/* Put link in RxDetect (enable port) */
 			if (link_state == USB_SS_PORT_LS_RX_DETECT) {
 				xhci_dbg(xhci, "Enable port %d-%d\n",
-					 hcd->self.busnum, wIndex + 1);
-				xhci_set_link_state(xhci, ports[wIndex],
-							link_state);
-				temp = readl(ports[wIndex]->addr);
+					 hcd->self.busnum, portnum1);
+				xhci_set_link_state(xhci, port,	link_state);
+				temp = readl(port->addr);
 				break;
 			}
 
@@ -1399,11 +1405,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				}
 
 				xhci_dbg(xhci, "Enable compliance mode transition for port %d-%d\n",
-					 hcd->self.busnum, wIndex + 1);
-				xhci_set_link_state(xhci, ports[wIndex],
-						link_state);
+					 hcd->self.busnum, portnum1);
+				xhci_set_link_state(xhci, port, link_state);
 
-				temp = readl(ports[wIndex]->addr);
+				temp = readl(port->addr);
 				break;
 			}
 			/* Port must be enabled */
@@ -1414,8 +1419,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			/* Can't set port link state above '3' (U3) */
 			if (link_state > USB_SS_PORT_LS_U3) {
 				xhci_warn(xhci, "Cannot set port %d-%d link state %d\n",
-					  hcd->self.busnum, wIndex + 1,
-					  link_state);
+					  hcd->self.busnum, portnum1, link_state);
 				goto error;
 			}
 
@@ -1440,8 +1444,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 					reinit_completion(&bus_state->u3exit_done[wIndex]);
 				}
 				if (pls <= XDEV_U3) /* U1, U2, U3 */
-					xhci_set_link_state(xhci, ports[wIndex],
-							    USB_SS_PORT_LS_U0);
+					xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U0);
 				if (!wait_u0) {
 					if (pls > XDEV_U3)
 						goto error;
@@ -1451,16 +1454,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 				if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
 								 msecs_to_jiffies(500)))
 					xhci_dbg(xhci, "missing U0 port change event for port %d-%d\n",
-						 hcd->self.busnum, wIndex + 1);
+						 hcd->self.busnum, portnum1);
 				spin_lock_irqsave(&xhci->lock, flags);
-				temp = readl(ports[wIndex]->addr);
+				temp = readl(port->addr);
 				break;
 			}
 
 			if (link_state == USB_SS_PORT_LS_U3) {
 				int retries = 16;
 				slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-						wIndex + 1);
+								    portnum1);
 				if (slot_id) {
 					/* unlock to execute stop endpoint
 					 * commands */
@@ -1469,16 +1472,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 					xhci_stop_device(xhci, slot_id, 1);
 					spin_lock_irqsave(&xhci->lock, flags);
 				}
-				xhci_set_link_state(xhci, ports[wIndex], USB_SS_PORT_LS_U3);
+				xhci_set_link_state(xhci, port, USB_SS_PORT_LS_U3);
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				while (retries--) {
 					usleep_range(4000, 8000);
-					temp = readl(ports[wIndex]->addr);
+					temp = readl(port->addr);
 					if ((temp & PORT_PLS_MASK) == XDEV_U3)
 						break;
 				}
 				spin_lock_irqsave(&xhci->lock, flags);
-				temp = readl(ports[wIndex]->addr);
+				temp = readl(port->addr);
 				bus_state->suspended_ports |= 1 << wIndex;
 			}
 			break;
@@ -1493,39 +1496,38 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			break;
 		case USB_PORT_FEAT_RESET:
 			temp = (temp | PORT_RESET);
-			writel(temp, ports[wIndex]->addr);
+			writel(temp, port->addr);
 
-			temp = readl(ports[wIndex]->addr);
+			temp = readl(port->addr);
 			xhci_dbg(xhci, "set port reset, actual port %d-%d status  = 0x%x\n",
-				 hcd->self.busnum, wIndex + 1, temp);
+				 hcd->self.busnum, portnum1, temp);
 			break;
 		case USB_PORT_FEAT_REMOTE_WAKE_MASK:
-			xhci_set_remote_wake_mask(xhci, ports[wIndex],
-						  wake_mask);
-			temp = readl(ports[wIndex]->addr);
+			xhci_set_remote_wake_mask(xhci, port, wake_mask);
+			temp = readl(port->addr);
 			xhci_dbg(xhci, "set port remote wake mask, actual port %d-%d status  = 0x%x\n",
-				 hcd->self.busnum, wIndex + 1, temp);
+				 hcd->self.busnum, portnum1, temp);
 			break;
 		case USB_PORT_FEAT_BH_PORT_RESET:
 			temp |= PORT_WR;
-			writel(temp, ports[wIndex]->addr);
-			temp = readl(ports[wIndex]->addr);
+			writel(temp, port->addr);
+			temp = readl(port->addr);
 			break;
 		case USB_PORT_FEAT_U1_TIMEOUT:
 			if (hcd->speed < HCD_USB3)
 				goto error;
-			temp = readl(ports[wIndex]->addr + PORTPMSC);
+			temp = readl(port->addr + PORTPMSC);
 			temp &= ~PORT_U1_TIMEOUT_MASK;
 			temp |= PORT_U1_TIMEOUT(timeout);
-			writel(temp, ports[wIndex]->addr + PORTPMSC);
+			writel(temp, port->addr + PORTPMSC);
 			break;
 		case USB_PORT_FEAT_U2_TIMEOUT:
 			if (hcd->speed < HCD_USB3)
 				goto error;
-			temp = readl(ports[wIndex]->addr + PORTPMSC);
+			temp = readl(port->addr + PORTPMSC);
 			temp &= ~PORT_U2_TIMEOUT_MASK;
 			temp |= PORT_U2_TIMEOUT(timeout);
-			writel(temp, ports[wIndex]->addr + PORTPMSC);
+			writel(temp, port->addr + PORTPMSC);
 			break;
 		case USB_PORT_FEAT_TEST:
 			/* 4.19.6 Port Test Modes (USB2 Test Mode) */
@@ -1541,13 +1543,16 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			goto error;
 		}
 		/* unblock any posted writes */
-		temp = readl(ports[wIndex]->addr);
+		temp = readl(port->addr);
 		break;
 	case ClearPortFeature:
-		if (!wIndex || wIndex > max_ports)
+		if (!portnum1 || portnum1 > max_ports)
 			goto error;
+
+		port = ports[portnum1 - 1];
+
 		wIndex--;
-		temp = readl(ports[wIndex]->addr);
+		temp = readl(port->addr);
 		if (temp == ~(u32)0) {
 			xhci_hc_died(xhci);
 			retval = -ENODEV;
@@ -1557,7 +1562,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		temp = xhci_port_state_to_neutral(temp);
 		switch (wValue) {
 		case USB_PORT_FEAT_SUSPEND:
-			temp = readl(ports[wIndex]->addr);
+			temp = readl(port->addr);
 			xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n");
 			xhci_dbg(xhci, "PORTSC %04x\n", temp);
 			if (temp & PORT_RESET)
@@ -1568,20 +1573,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 
 				set_bit(wIndex, &bus_state->resuming_ports);
 				usb_hcd_start_port_resume(&hcd->self, wIndex);
-				xhci_set_link_state(xhci, ports[wIndex],
-						    XDEV_RESUME);
+				xhci_set_link_state(xhci, port, XDEV_RESUME);
 				spin_unlock_irqrestore(&xhci->lock, flags);
 				msleep(USB_RESUME_TIMEOUT);
 				spin_lock_irqsave(&xhci->lock, flags);
-				xhci_set_link_state(xhci, ports[wIndex],
-							XDEV_U0);
+				xhci_set_link_state(xhci, port, XDEV_U0);
 				clear_bit(wIndex, &bus_state->resuming_ports);
 				usb_hcd_end_port_resume(&hcd->self, wIndex);
 			}
 			bus_state->port_c_suspend |= 1 << wIndex;
 
 			slot_id = xhci_find_slot_id_by_port(hcd, xhci,
-					wIndex + 1);
+					portnum1);
 			if (!slot_id) {
 				xhci_dbg(xhci, "slot_id is zero\n");
 				goto error;
@@ -1599,11 +1602,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 		case USB_PORT_FEAT_C_PORT_LINK_STATE:
 		case USB_PORT_FEAT_C_PORT_CONFIG_ERROR:
 			xhci_clear_port_change_bit(xhci, wValue, wIndex,
-					ports[wIndex]->addr, temp);
+					port->addr, temp);
 			break;
 		case USB_PORT_FEAT_ENABLE:
 			xhci_disable_port(hcd, xhci, wIndex,
-					ports[wIndex]->addr, temp);
+					port->addr, temp);
 			break;
 		case USB_PORT_FEAT_POWER:
 			xhci_set_port_power(xhci, hcd, wIndex, false, &flags);
-- 
2.25.1


  parent reply	other threads:[~2023-02-02 15:06 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-02 15:04 [PATCH 00/11] xhci features for usb-next Mathias Nyman
2023-02-02 15:04 ` [PATCH 01/11] xhci: fix event ring segment table related masks and variables in header Mathias Nyman
2023-02-02 15:04 ` [PATCH 02/11] xhci: remove xhci_test_trb_in_td_math early development check Mathias Nyman
2023-02-02 15:04 ` [PATCH 03/11] xhci: Refactor interrupter code for initial multi interrupter support Mathias Nyman
2023-02-02 15:04 ` [PATCH 04/11] xhci: add helpers for enabling and disabling interrupters Mathias Nyman
2023-02-02 15:04 ` Mathias Nyman [this message]
2023-02-02 15:05 ` [PATCH 06/11] xhci: pass port pointer as parameter to xhci_set_port_power() Mathias Nyman
2023-02-02 15:05 ` [PATCH 07/11] xhci: move port specific items such as state completions to port structure Mathias Nyman
2023-02-02 15:05 ` [PATCH 08/11] xhci: Pass port structure as parameter to xhci_disable_port() Mathias Nyman
2023-02-02 15:05 ` [PATCH 09/11] xhci: rename resume_done to resume_timestamp Mathias Nyman
2023-02-02 15:05 ` [PATCH 10/11] xhci: clear usb2 resume related variables in one place Mathias Nyman
2023-02-02 15:05 ` [PATCH 11/11] xhci: decouple usb2 port resume and get_port_status request handling Mathias Nyman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230202150505.618915-6-mathias.nyman@linux.intel.com \
    --to=mathias.nyman@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.