From: Abel Vesa <abel.vesa@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"vkoul@kernel.org" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Johan Hovold" <johan+linaro@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v8 06/11] phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
Date: Mon, 6 Feb 2023 23:26:14 +0200 [thread overview]
Message-ID: <20230206212619.3218741-7-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230206212619.3218741-1-abel.vesa@linaro.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
The v7 of this patch is:
https://lore.kernel.org/all/20230203081807.2248625-7-abel.vesa@linaro.org/
Changes since v7:
* none
Changes since v6:
* none
Changes since v5:
* none
Changes since v4:
* none
Changes since v3:
* added Dmitry's R-b tag
Changes since v2:
* none
Changes since v1:
* split all the offsets into separate patches, like Vinod suggested
.../phy-qcom-qmp-qserdes-txrx-v6_20.h | 45 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 46 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
new file mode 100644
index 000000000000..5385a8b60970
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX 0x30
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX 0x34
+#define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN 0xac
+#define QSERDES_V6_20_TX_LANE_MODE_1 0x78
+#define QSERDES_V6_20_TX_LANE_MODE_2 0x7c
+#define QSERDES_V6_20_TX_LANE_MODE_3 0x80
+
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c
+#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20
+#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3 0x34
+#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2 0x9c
+#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET 0xa0
+#define QSERDES_V6_20_RX_DFE_3 0xb4
+#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL 0xe8
+#define QSERDES_V6_20_RX_GM_CAL 0x10c
+#define QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4 0x120
+#define QSERDES_V6_20_RX_SIGDET_ENABLES 0x148
+#define QSERDES_V6_20_RX_PHPRE_CTRL 0x188
+#define QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x194
+#define QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32 0x1dc
+#define QSERDES_V6_20_RX_MODE_RATE2_B0 0x1f4
+#define QSERDES_V6_20_RX_MODE_RATE2_B1 0x1f8
+#define QSERDES_V6_20_RX_MODE_RATE2_B2 0x1fc
+#define QSERDES_V6_20_RX_MODE_RATE2_B3 0x200
+#define QSERDES_V6_20_RX_MODE_RATE2_B4 0x204
+#define QSERDES_V6_20_RX_MODE_RATE2_B5 0x208
+#define QSERDES_V6_20_RX_MODE_RATE2_B6 0x20c
+#define QSERDES_V6_20_RX_MODE_RATE3_B0 0x210
+#define QSERDES_V6_20_RX_MODE_RATE3_B1 0x214
+#define QSERDES_V6_20_RX_MODE_RATE3_B2 0x218
+#define QSERDES_V6_20_RX_MODE_RATE3_B3 0x21c
+#define QSERDES_V6_20_RX_MODE_RATE3_B4 0x220
+#define QSERDES_V6_20_RX_MODE_RATE3_B5 0x224
+#define QSERDES_V6_20_RX_MODE_RATE3_B6 0x228
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 760de4c76e5b..e5974e6caf51 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -23,6 +23,7 @@
#include "phy-qcom-qmp-qserdes-com-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
#include "phy-qcom-qmp-qserdes-pll.h"
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@linaro.org>
To: "Andy Gross" <agross@kernel.org>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"vkoul@kernel.org" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Manivannan Sadhasivam" <mani@kernel.org>,
"Johan Hovold" <johan+linaro@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
linux-phy@lists.infradead.org, devicetree@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: [PATCH v8 06/11] phy: qcom-qmp: qserdes-txrx: Add v6.20 register offsets
Date: Mon, 6 Feb 2023 23:26:14 +0200 [thread overview]
Message-ID: <20230206212619.3218741-7-abel.vesa@linaro.org> (raw)
In-Reply-To: <20230206212619.3218741-1-abel.vesa@linaro.org>
The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for
PCIE g4x2. Add the new qserdes TX RX PCIE specific offsets in a
dedicated header file.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
The v7 of this patch is:
https://lore.kernel.org/all/20230203081807.2248625-7-abel.vesa@linaro.org/
Changes since v7:
* none
Changes since v6:
* none
Changes since v5:
* none
Changes since v4:
* none
Changes since v3:
* added Dmitry's R-b tag
Changes since v2:
* none
Changes since v1:
* split all the offsets into separate patches, like Vinod suggested
.../phy-qcom-qmp-qserdes-txrx-v6_20.h | 45 +++++++++++++++++++
drivers/phy/qualcomm/phy-qcom-qmp.h | 1 +
2 files changed, 46 insertions(+)
create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
new file mode 100644
index 000000000000..5385a8b60970
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-txrx-v6_20.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+#ifndef QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+#define QCOM_PHY_QMP_QSERDES_TXRX_PCIE_V6_20_H_
+
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_TX 0x30
+#define QSERDES_V6_20_TX_RES_CODE_LANE_OFFSET_RX 0x34
+#define QSERDES_V6_20_TX_TRAN_DRVR_EMP_EN 0xac
+#define QSERDES_V6_20_TX_LANE_MODE_1 0x78
+#define QSERDES_V6_20_TX_LANE_MODE_2 0x7c
+#define QSERDES_V6_20_TX_LANE_MODE_3 0x80
+
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_2 0x08
+#define QSERDES_V6_20_RX_UCDR_FO_GAIN_RATE_3 0x0c
+#define QSERDES_V6_20_RX_UCDR_PI_CONTROLS 0x20
+#define QSERDES_V6_20_RX_UCDR_SO_ACC_DEFAULT_VAL_RATE3 0x34
+#define QSERDES_V6_20_RX_IVCM_CAL_CTRL2 0x9c
+#define QSERDES_V6_20_RX_IVCM_POSTCAL_OFFSET 0xa0
+#define QSERDES_V6_20_RX_DFE_3 0xb4
+#define QSERDES_V6_20_RX_VGA_CAL_MAN_VAL 0xe8
+#define QSERDES_V6_20_RX_GM_CAL 0x10c
+#define QSERDES_V6_20_RX_EQU_ADAPTOR_CNTRL4 0x120
+#define QSERDES_V6_20_RX_SIGDET_ENABLES 0x148
+#define QSERDES_V6_20_RX_PHPRE_CTRL 0x188
+#define QSERDES_V6_20_RX_DFE_CTLE_POST_CAL_OFFSET 0x194
+#define QSERDES_V6_20_RX_Q_PI_INTRINSIC_BIAS_RATE32 0x1dc
+#define QSERDES_V6_20_RX_MODE_RATE2_B0 0x1f4
+#define QSERDES_V6_20_RX_MODE_RATE2_B1 0x1f8
+#define QSERDES_V6_20_RX_MODE_RATE2_B2 0x1fc
+#define QSERDES_V6_20_RX_MODE_RATE2_B3 0x200
+#define QSERDES_V6_20_RX_MODE_RATE2_B4 0x204
+#define QSERDES_V6_20_RX_MODE_RATE2_B5 0x208
+#define QSERDES_V6_20_RX_MODE_RATE2_B6 0x20c
+#define QSERDES_V6_20_RX_MODE_RATE3_B0 0x210
+#define QSERDES_V6_20_RX_MODE_RATE3_B1 0x214
+#define QSERDES_V6_20_RX_MODE_RATE3_B2 0x218
+#define QSERDES_V6_20_RX_MODE_RATE3_B3 0x21c
+#define QSERDES_V6_20_RX_MODE_RATE3_B4 0x220
+#define QSERDES_V6_20_RX_MODE_RATE3_B5 0x224
+#define QSERDES_V6_20_RX_MODE_RATE3_B6 0x228
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 760de4c76e5b..e5974e6caf51 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -23,6 +23,7 @@
#include "phy-qcom-qmp-qserdes-com-v6.h"
#include "phy-qcom-qmp-qserdes-txrx-v6.h"
+#include "phy-qcom-qmp-qserdes-txrx-v6_20.h"
#include "phy-qcom-qmp-qserdes-pll.h"
--
2.34.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2023-02-06 21:26 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-06 21:26 [PATCH v8 00/11] sm8550: Add PCIe HC and PHY support Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 01/11] dt-bindings: phy: Add QMP PCIe PHY comptible for SM8550 Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 02/11] phy: qcom-qmp: pcs: Add v6 register offsets Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 03/11] phy: qcom-qmp: pcs: Add v6.20 " Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 04/11] phy: qcom-qmp: pcs-pcie: Add v6 " Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 05/11] phy: qcom-qmp: pcs-pcie: Add v6.20 " Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` Abel Vesa [this message]
2023-02-06 21:26 ` [PATCH v8 06/11] phy: qcom-qmp: qserdes-txrx: " Abel Vesa
2023-02-06 21:26 ` [PATCH v8 07/11] phy: qcom-qmp: qserdes-lane-shared: Add v6 " Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 08/11] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-08 16:48 ` Johan Hovold
2023-02-08 16:48 ` Johan Hovold
2023-02-06 21:26 ` [PATCH v8 09/11] dt-bindings: PCI: qcom: Add SM8550 compatible Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-06 21:26 ` [PATCH v8 10/11] PCI: qcom: Add SM8550 PCIe support Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-08 16:58 ` Johan Hovold
2023-02-08 16:58 ` Johan Hovold
2023-02-06 21:26 ` [PATCH v8 11/11] arm64: dts: qcom: sm8550: Fix PCIe PHYs and controllers nodes Abel Vesa
2023-02-06 21:26 ` Abel Vesa
2023-02-08 17:02 ` Johan Hovold
2023-02-08 17:02 ` Johan Hovold
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230206212619.3218741-7-abel.vesa@linaro.org \
--to=abel.vesa@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=johan+linaro@kernel.org \
--cc=kishon@kernel.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=robh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.