From: Abel Vesa <abel.vesa@linaro.org> To: "Andy Gross" <agross@kernel.org>, "Bjorn Andersson" <andersson@kernel.org>, "Konrad Dybcio" <konrad.dybcio@linaro.org>, "Rob Herring" <robh@kernel.org>, "Krzysztof Wilczyński" <kw@linux.com>, "Bjorn Helgaas" <bhelgaas@google.com>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Lorenzo Pieralisi" <lpieralisi@kernel.org>, "vkoul@kernel.org" <vkoul@kernel.org>, "Kishon Vijay Abraham I" <kishon@kernel.org>, "Manivannan Sadhasivam" <mani@kernel.org>, "Johan Hovold" <johan+linaro@kernel.org> Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Subject: [PATCH v8 07/11] phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets Date: Mon, 6 Feb 2023 23:26:15 +0200 [thread overview] Message-ID: <20230206212619.3218741-8-abel.vesa@linaro.org> (raw) In-Reply-To: <20230206212619.3218741-1-abel.vesa@linaro.org> The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- The v7 of this patch is: https://lore.kernel.org/all/20230203081807.2248625-8-abel.vesa@linaro.org/ Changes since v7: * none Changes since v6: * none Changes since v5: * none Changes since v4: * none Changes since v3: * none Changes since v2: * none Changes since v1: * split all the offsets into separate patches, like Vinod suggested .../phy-qcom-qmp-qserdes-ln-shrd-v6.h | 32 +++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 1 + 2 files changed, 33 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h new file mode 100644 index 000000000000..86d7d796d5d7 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_ +#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_ + +#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0 +#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0 +#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4 +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4 +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5 0xe8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6 0xec +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210 0xf0 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3 0xf4 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210 0xf8 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3 0xfc +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210 0x100 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3 0x104 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3 0x10c +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3 0x114 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3 0x11c +#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE 0x128 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index e5974e6caf51..148663ee713a 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -24,6 +24,7 @@ #include "phy-qcom-qmp-qserdes-com-v6.h" #include "phy-qcom-qmp-qserdes-txrx-v6.h" #include "phy-qcom-qmp-qserdes-txrx-v6_20.h" +#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h" #include "phy-qcom-qmp-qserdes-pll.h" -- 2.34.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Abel Vesa <abel.vesa@linaro.org> To: "Andy Gross" <agross@kernel.org>, "Bjorn Andersson" <andersson@kernel.org>, "Konrad Dybcio" <konrad.dybcio@linaro.org>, "Rob Herring" <robh@kernel.org>, "Krzysztof Wilczyński" <kw@linux.com>, "Bjorn Helgaas" <bhelgaas@google.com>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>, "Lorenzo Pieralisi" <lpieralisi@kernel.org>, "vkoul@kernel.org" <vkoul@kernel.org>, "Kishon Vijay Abraham I" <kishon@kernel.org>, "Manivannan Sadhasivam" <mani@kernel.org>, "Johan Hovold" <johan+linaro@kernel.org> Cc: linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Subject: [PATCH v8 07/11] phy: qcom-qmp: qserdes-lane-shared: Add v6 register offsets Date: Mon, 6 Feb 2023 23:26:15 +0200 [thread overview] Message-ID: <20230206212619.3218741-8-abel.vesa@linaro.org> (raw) In-Reply-To: <20230206212619.3218741-1-abel.vesa@linaro.org> The new SM8550 SoC bumps up the HW version of QMP phy to v6.20 for PCIE g4x2. Add the new lane shared PCIE specific offsets in a dedicated header file. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- The v7 of this patch is: https://lore.kernel.org/all/20230203081807.2248625-8-abel.vesa@linaro.org/ Changes since v7: * none Changes since v6: * none Changes since v5: * none Changes since v4: * none Changes since v3: * none Changes since v2: * none Changes since v1: * split all the offsets into separate patches, like Vinod suggested .../phy-qcom-qmp-qserdes-ln-shrd-v6.h | 32 +++++++++++++++++++ drivers/phy/qualcomm/phy-qcom-qmp.h | 1 + 2 files changed, 33 insertions(+) create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h new file mode 100644 index 000000000000..86d7d796d5d7 --- /dev/null +++ b/drivers/phy/qualcomm/phy-qcom-qmp-qserdes-ln-shrd-v6.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2023, Linaro Limited + */ + +#ifndef QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_ +#define QCOM_PHY_QMP_QSERDES_LN_SHRD_V6_H_ + +#define QSERDES_V6_LN_SHRD_RXCLK_DIV2_CTRL 0xa0 +#define QSERDES_V6_LN_SHRD_RX_Q_EN_RATES 0xb0 +#define QSERDES_V6_LN_SHRD_DFE_DAC_ENABLE1 0xb4 +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH1 0xc4 +#define QSERDES_V6_LN_SHRD_TX_ADAPT_POST_THRESH2 0xc8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B0 0xd4 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B1 0xd8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B2 0xdc +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B3 0xe0 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B4 0xe4 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B5 0xe8 +#define QSERDES_V6_LN_SHRD_RX_MODE_RATE_0_1_B6 0xec +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE210 0xf0 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH1_RATE3 0xf4 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE210 0xf8 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH2_RATE3 0xfc +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE210 0x100 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH3_RATE3 0x104 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH4_RATE3 0x10c +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH5_RATE3 0x114 +#define QSERDES_V6_LN_SHRD_RX_MARG_COARSE_THRESH6_RATE3 0x11c +#define QSERDES_V6_LN_SHRD_RX_SUMMER_CAL_SPD_MODE 0x128 + +#endif diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h index e5974e6caf51..148663ee713a 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp.h +++ b/drivers/phy/qualcomm/phy-qcom-qmp.h @@ -24,6 +24,7 @@ #include "phy-qcom-qmp-qserdes-com-v6.h" #include "phy-qcom-qmp-qserdes-txrx-v6.h" #include "phy-qcom-qmp-qserdes-txrx-v6_20.h" +#include "phy-qcom-qmp-qserdes-ln-shrd-v6.h" #include "phy-qcom-qmp-qserdes-pll.h" -- 2.34.1
next prev parent reply other threads:[~2023-02-06 21:26 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-02-06 21:26 [PATCH v8 00/11] sm8550: Add PCIe HC and PHY support Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-06 21:26 ` [PATCH v8 01/11] dt-bindings: phy: Add QMP PCIe PHY comptible for SM8550 Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-06 21:26 ` [PATCH v8 02/11] phy: qcom-qmp: pcs: Add v6 register offsets Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-06 21:26 ` [PATCH v8 03/11] phy: qcom-qmp: pcs: Add v6.20 " Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-06 21:26 ` [PATCH v8 04/11] phy: qcom-qmp: pcs-pcie: Add v6 " Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-06 21:26 ` [PATCH v8 05/11] phy: qcom-qmp: pcs-pcie: Add v6.20 " Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-06 21:26 ` [PATCH v8 06/11] phy: qcom-qmp: qserdes-txrx: " Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-06 21:26 ` Abel Vesa [this message] 2023-02-06 21:26 ` [PATCH v8 07/11] phy: qcom-qmp: qserdes-lane-shared: Add v6 " Abel Vesa 2023-02-06 21:26 ` [PATCH v8 08/11] phy: qcom-qmp-pcie: Add support for SM8550 g3x2 and g4x2 PCIEs Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-08 16:48 ` Johan Hovold 2023-02-08 16:48 ` Johan Hovold 2023-02-06 21:26 ` [PATCH v8 09/11] dt-bindings: PCI: qcom: Add SM8550 compatible Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-06 21:26 ` [PATCH v8 10/11] PCI: qcom: Add SM8550 PCIe support Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-08 16:58 ` Johan Hovold 2023-02-08 16:58 ` Johan Hovold 2023-02-06 21:26 ` [PATCH v8 11/11] arm64: dts: qcom: sm8550: Fix PCIe PHYs and controllers nodes Abel Vesa 2023-02-06 21:26 ` Abel Vesa 2023-02-08 17:02 ` Johan Hovold 2023-02-08 17:02 ` Johan Hovold
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230206212619.3218741-8-abel.vesa@linaro.org \ --to=abel.vesa@linaro.org \ --cc=agross@kernel.org \ --cc=andersson@kernel.org \ --cc=bhelgaas@google.com \ --cc=devicetree@vger.kernel.org \ --cc=johan+linaro@kernel.org \ --cc=kishon@kernel.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=kw@linux.com \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pci@vger.kernel.org \ --cc=linux-phy@lists.infradead.org \ --cc=lpieralisi@kernel.org \ --cc=mani@kernel.org \ --cc=robh@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.