All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Christian Hewitt <christianshewitt@gmail.com>,
	Yuntian Zhang <yt@radxa.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH 7/8] arm64: dts: amlogic: meson-sm1: use correct enable-gpios
Date: Tue, 07 Feb 2023 16:08:00 +0100	[thread overview]
Message-ID: <20230207-b4-amlogic-bindings-fixups-v2-v1-7-93b7e50286e7@linaro.org> (raw)
In-Reply-To: <20230207-b4-amlogic-bindings-fixups-v2-v1-0-93b7e50286e7@linaro.org>

Replace enable-gpio by enable-gpios to match the bindings.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index e1683e0630b0..17045ff81c69 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -105,7 +105,7 @@ vddio_c: regulator-vddio_c {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index ddb1b345397f..2fce44939f45 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@ tf_io: gpio-regulator-tf_io {
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 

-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	 Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	 Christian Hewitt <christianshewitt@gmail.com>,
	Yuntian Zhang <yt@radxa.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	 linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	 Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH 7/8] arm64: dts: amlogic: meson-sm1: use correct enable-gpios
Date: Tue, 07 Feb 2023 16:08:00 +0100	[thread overview]
Message-ID: <20230207-b4-amlogic-bindings-fixups-v2-v1-7-93b7e50286e7@linaro.org> (raw)
In-Reply-To: <20230207-b4-amlogic-bindings-fixups-v2-v1-0-93b7e50286e7@linaro.org>

Replace enable-gpio by enable-gpios to match the bindings.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index e1683e0630b0..17045ff81c69 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -105,7 +105,7 @@ vddio_c: regulator-vddio_c {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index ddb1b345397f..2fce44939f45 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@ tf_io: gpio-regulator-tf_io {
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 

-- 
2.34.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <neil.armstrong@linaro.org>
To: Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Kevin Hilman <khilman@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	 Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	 Christian Hewitt <christianshewitt@gmail.com>,
	Yuntian Zhang <yt@radxa.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	 linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	 Neil Armstrong <neil.armstrong@linaro.org>
Subject: [PATCH 7/8] arm64: dts: amlogic: meson-sm1: use correct enable-gpios
Date: Tue, 07 Feb 2023 16:08:00 +0100	[thread overview]
Message-ID: <20230207-b4-amlogic-bindings-fixups-v2-v1-7-93b7e50286e7@linaro.org> (raw)
In-Reply-To: <20230207-b4-amlogic-bindings-fixups-v2-v1-0-93b7e50286e7@linaro.org>

Replace enable-gpio by enable-gpios to match the bindings.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi | 2 +-
 arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi   | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index e1683e0630b0..17045ff81c69 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -105,7 +105,7 @@ vddio_c: regulator-vddio_c {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
index ddb1b345397f..2fce44939f45 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi
@@ -48,7 +48,7 @@ tf_io: gpio-regulator-tf_io {
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_5v>;
 
-		enable-gpio = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
+		enable-gpios = <&gpio_ao GPIOE_2 GPIO_OPEN_DRAIN>;
 		enable-active-high;
 		regulator-always-on;
 

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-02-07 15:08 UTC|newest]

Thread overview: 60+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-07 15:07 [PATCH 0/8] arm64: meson: bunch of DT fixes, take 2 Neil Armstrong
2023-02-07 15:07 ` Neil Armstrong
2023-02-07 15:07 ` Neil Armstrong
2023-02-07 15:07 ` [PATCH 1/8] arm64: dts: amlogic: meson-sm1-bananapi: correct usb-hub hog node name Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-11 19:46   ` Martin Blumenstingl
2023-02-11 19:46     ` Martin Blumenstingl
2023-02-11 19:46     ` Martin Blumenstingl
2023-02-07 15:07 ` [PATCH 2/8] arm64: dts: amlogic: meson-gxm-s912-libretech-pc: add simple connector node in fusb302 node Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-11 19:47   ` Martin Blumenstingl
2023-02-11 19:47     ` Martin Blumenstingl
2023-02-11 19:47     ` Martin Blumenstingl
2023-02-07 15:07 ` [PATCH 3/8] arm64: dts: amlogic: meson-axg-jethome-jethub-j1xx: remove invalid #gpio-cells in onewire node Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-08  6:22   ` Vyacheslav
2023-02-08  6:22     ` Vyacheslav
2023-02-08  6:22     ` Vyacheslav
2023-02-11 20:06   ` Martin Blumenstingl
2023-02-11 20:06     ` Martin Blumenstingl
2023-02-11 20:06     ` Martin Blumenstingl
2023-02-07 15:07 ` [PATCH 4/8] arm64: dts: amlogic: meson-g12b-radxa-zero2: fix pwm clock names Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-11 19:50   ` Martin Blumenstingl
2023-02-11 19:50     ` Martin Blumenstingl
2023-02-11 19:50     ` Martin Blumenstingl
2023-02-07 15:07 ` [PATCH 5/8] arm64: dts: amlogic: meson-g12b-odroid-go-ultra: rename keypad-gpio pinctrl node Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-11 20:04   ` Martin Blumenstingl
2023-02-11 20:04     ` Martin Blumenstingl
2023-02-11 20:04     ` Martin Blumenstingl
2023-02-13  9:03     ` Neil Armstrong
2023-02-13  9:03       ` Neil Armstrong
2023-02-13  9:03       ` Neil Armstrong
2023-02-07 15:07 ` [PATCH 6/8] arm64: dts: amlogic: meson-s4: fix apb4 bus node name Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-07 15:07   ` Neil Armstrong
2023-02-11 20:04   ` Martin Blumenstingl
2023-02-11 20:04     ` Martin Blumenstingl
2023-02-11 20:04     ` Martin Blumenstingl
2023-02-07 15:08 ` Neil Armstrong [this message]
2023-02-07 15:08   ` [PATCH 7/8] arm64: dts: amlogic: meson-sm1: use correct enable-gpios Neil Armstrong
2023-02-07 15:08   ` Neil Armstrong
2023-02-11 20:05   ` Martin Blumenstingl
2023-02-11 20:05     ` Martin Blumenstingl
2023-02-11 20:05     ` Martin Blumenstingl
2023-02-07 15:08 ` [PATCH 8/8] arm64: dts: amlogic: meson-gxm-s912-libretech-pc: remove unused pinctrl-names from phy node Neil Armstrong
2023-02-07 15:08   ` Neil Armstrong
2023-02-07 15:08   ` Neil Armstrong
2023-02-11 20:05   ` Martin Blumenstingl
2023-02-11 20:05     ` Martin Blumenstingl
2023-02-11 20:05     ` Martin Blumenstingl
2023-03-06  8:38 ` [PATCH 0/8] arm64: meson: bunch of DT fixes, take 2 Neil Armstrong
2023-03-06  8:38   ` Neil Armstrong
2023-03-06  8:38   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230207-b4-amlogic-bindings-fixups-v2-v1-7-93b7e50286e7@linaro.org \
    --to=neil.armstrong@linaro.org \
    --cc=christianshewitt@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=robh+dt@kernel.org \
    --cc=yt@radxa.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.