[PATCH v2 6/7] dt-bindings: remoteproc: qcom,glink-rpm-edge: convert to DT schema

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

Convert Qualcomm G-Link RPM edge binding to DT schema.  Move it to
remoteproc as it better suits the purpose - communication channel with
remote processor.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. :: -> :
2. Correct qcom,intents type.

There are no strict dependencies on other patches, but the previous
"qcom,apcs-kpss-global" should end up in the same cycle (or earlier) as
this one.
---
 .../remoteproc/qcom,glink-rpm-edge.yaml       | 99 +++++++++++++++++++
 .../bindings/soc/qcom/qcom,glink.txt          | 94 ------------------
 2 files changed, 99 insertions(+), 94 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
 delete mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
new file mode 100644
index 000000000000..f5a044e20c4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,glink-rpm-edge.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,glink-rpm-edge.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm G-Link RPM edge
+
+description: |
+  Qualcomm G-Link edge, a FIFO based mechanism for communication with Resource
+  Power Manager (RPM) on various Qualcomm platforms.
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    const: qcom,glink-rpm
+
+  label:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Name of the edge, used for debugging and identification purposes. The
+      node name will be used if this is not present.
+
+  interrupts:
+    maxItems: 1
+
+  mboxes:
+    items:
+      - description: rpm_hlos mailbox in APCS
+
+  qcom,remote-pid:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The identifier for the remote processor as known by the rest of the
+      system.
+
+  qcom,rpm-msg-ram:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      RPM message memory resource (compatible: qcom,rpm-msg-ram).
+
+  rpm-requests:
+    type: object
+    $ref: /schemas/soc/qcom/qcom,smd-rpm.yaml#
+    unevaluatedProperties: false
+    description:
+      Qualcomm Resource Power Manager (RPM) over G-Link
+
+    properties:
+      qcom,intents:
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        maxItems: 32
+        items:
+          items:
+            - description: size of each intent to preallocate
+            - description: amount of intents to preallocate
+              minimum: 1
+        description:
+          List of (size, amount) pairs describing what intents should be
+          preallocated for this virtual channel. This can be used to tweak the
+          default intents available for the channel to meet expectations of the
+          remote.
+
+    required:
+      - qcom,glink-channels
+
+required:
+  - compatible
+  - interrupts
+  - mboxes
+
+anyOf:
+  - required:
+      - qcom,remote-pid
+  - required:
+      - qcom,rpm-msg-ram
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    rpm-glink {
+        compatible = "qcom,glink-rpm";
+        interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+        mboxes = <&apcs_glb 0>;
+        qcom,rpm-msg-ram = <&rpm_msg_ram>;
+
+        rpm-requests {
+            compatible = "qcom,rpm-msm8996";
+            qcom,glink-channels = "rpm_requests";
+
+            /* ... */
+        };
+    };
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
deleted file mode 100644
index 1214192847ac..000000000000
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Qualcomm GLINK edge binding
-
-This binding describes a Qualcomm GLINK edge, a fifo based mechanism for
-communication between subsystem-pairs on various Qualcomm platforms. Two types
-of edges can be described by the binding; the GLINK RPM edge and a SMEM based
-edge.
-
-- compatible:
-	Usage: required for glink-rpm
-	Value type: <stringlist>
-	Definition: must be "qcom,glink-rpm"
-
-- label:
-	Usage: optional
-	Value type: <string>
-	Definition: should specify the subsystem name this edge corresponds to.
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the IRQ used by the remote processor to
-		    signal this processor about communication related events
-
-- qcom,remote-pid:
-	Usage: required for glink-smem
-	Value type: <u32>
-	Definition: specifies the identifier of the remote endpoint of this edge
-
-- qcom,rpm-msg-ram:
-	Usage: required for glink-rpm
-	Value type: <prop-encoded-array>
-	Definition: handle to RPM message memory resource
-
-- mboxes:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to the "rpm_hlos" mailbox in APCS, as described
-		    in mailbox/mailbox.txt
-
-= GLINK DEVICES
-Each subnode of the GLINK node represent function tied to a virtual
-communication channel. The name of the nodes are not important. The properties
-of these nodes are defined by the individual bindings for the specific function
-- but must contain the following property:
-
-- qcom,glink-channels:
-	Usage: required
-	Value type: <stringlist>
-	Definition: a list of channels tied to this function, used for matching
-		    the function to a set of virtual channels
-
-- qcom,intents:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: a list of size,amount pairs describing what intents should
-		    be preallocated for this virtual channel. This can be used
-		    to tweak the default intents available for the channel to
-		    meet expectations of the remote.
-
-= EXAMPLE
-The following example represents the GLINK RPM node on a MSM8996 device, with
-the function for the "rpm_request" channel defined, which is used for
-regulators and root clocks.
-
-	apcs_glb: mailbox@9820000 {
-		compatible = "qcom,msm8996-apcs-hmss-global";
-		reg = <0x9820000 0x1000>;
-
-		#mbox-cells = <1>;
-	};
-
-	rpm_msg_ram: memory@68000 {
-		compatible = "qcom,rpm-msg-ram";
-		reg = <0x68000 0x6000>;
-	};
-
-	rpm-glink {
-		compatible = "qcom,glink-rpm";
-
-		interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-
-		qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
-		mboxes = <&apcs_glb 0>;
-
-		rpm-requests {
-			compatible = "qcom,rpm-msm8996";
-			qcom,glink-channels = "rpm_requests";
-
-			qcom,intents = <0x400 5
-					0x800 1>;
-			...
-		};
-	};
-- 
2.34.1