[PATCH 2/3] serial: 8250_em: Use dev_err_probe()

[Biju Das <biju.das.jz@bp.renesas.com>]

This patch simplify probe() function by using dev_err_probe()
instead of dev_err in probe().

While at it, remove the unused header file slab.h and added a
local variable 'dev' to replace '&pdev->dev' in probe().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
---
 drivers/tty/serial/8250/8250_em.c | 21 ++++++++-------------
 1 file changed, 8 insertions(+), 13 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index f8e99995eee9..3a45aa066d3d 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -13,7 +13,6 @@
 #include <linux/serial_reg.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <linux/slab.h>
 
 #include "8250.h"
 
@@ -79,6 +78,7 @@ static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value)
 static int serial8250_em_probe(struct platform_device *pdev)
 {
 	struct serial8250_em_priv *priv;
+	struct device *dev = &pdev->dev;
 	struct uart_8250_port up;
 	struct resource *regs;
 	int irq, ret;
@@ -88,27 +88,23 @@ static int serial8250_em_probe(struct platform_device *pdev)
 		return irq;
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!regs) {
-		dev_err(&pdev->dev, "missing registers\n");
-		return -EINVAL;
-	}
+	if (!regs)
+		return dev_err_probe(dev, -EINVAL, "missing registers\n");
 
-	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	priv->sclk = devm_clk_get(&pdev->dev, "sclk");
-	if (IS_ERR(priv->sclk)) {
-		dev_err(&pdev->dev, "unable to get clock\n");
-		return PTR_ERR(priv->sclk);
-	}
+	if (IS_ERR(priv->sclk))
+		return dev_err_probe(dev, PTR_ERR(priv->sclk), "unable to get clock\n");
 
 	memset(&up, 0, sizeof(up));
 	up.port.mapbase = regs->start;
 	up.port.irq = irq;
 	up.port.type = PORT_UNKNOWN;
 	up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
-	up.port.dev = &pdev->dev;
+	up.port.dev = dev;
 	up.port.private_data = priv;
 
 	clk_prepare_enable(priv->sclk);
@@ -122,9 +118,8 @@ static int serial8250_em_probe(struct platform_device *pdev)
 
 	ret = serial8250_register_8250_port(&up);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "unable to register 8250 port\n");
 		clk_disable_unprepare(priv->sclk);
-		return ret;
+		return dev_err_probe(dev, ret, "unable to register 8250 port\n");
 	}
 
 	priv->line = ret;
-- 
2.25.1