All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dave Chinner <david@fromorbit.com>
To: linux-xfs@vger.kernel.org
Subject: [PATCH 34/42] xfs: merge filestream AG lookup into xfs_filestream_select_ag()
Date: Fri, 10 Feb 2023 09:18:17 +1100	[thread overview]
Message-ID: <20230209221825.3722244-35-david@fromorbit.com> (raw)
In-Reply-To: <20230209221825.3722244-1-david@fromorbit.com>

From: Dave Chinner <dchinner@redhat.com>

The lookup currently either returns the cached filestream AG or it
calls xfs_filestreams_select_lengths() to looks up a new AG. This
has verify the AG that is selected, so we end up doing "select a new
AG loop in a couple of places when only one really is needed.  Merge
the initial lookup functionality with the length selection so that
we only need to do a single pick loop on lookup or verification
failure.

This undoes a lot of the factoring that enabled the selection to be
moved over to the filestreams code. It makes
xfs_filestream_select_ag() an awful messier, but it has to be made
worse before it can get better in future patches...

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
---
 fs/xfs/xfs_filestream.c | 196 ++++++++++++++++------------------------
 1 file changed, 76 insertions(+), 120 deletions(-)

diff --git a/fs/xfs/xfs_filestream.c b/fs/xfs/xfs_filestream.c
index a641404aa9a6..23044dab2001 100644
--- a/fs/xfs/xfs_filestream.c
+++ b/fs/xfs/xfs_filestream.c
@@ -258,55 +258,6 @@ xfs_filestream_get_parent(
 	return dir ? XFS_I(dir) : NULL;
 }
 
-/*
- * Find the right allocation group for a file, either by finding an
- * existing file stream or creating a new one.
- *
- * Returns NULLAGNUMBER in case of an error.
- */
-static xfs_agnumber_t
-xfs_filestream_lookup_ag(
-	struct xfs_inode	*ip)
-{
-	struct xfs_mount	*mp = ip->i_mount;
-	struct xfs_inode	*pip = NULL;
-	xfs_agnumber_t		startag, ag = NULLAGNUMBER;
-	struct xfs_mru_cache_elem *mru;
-
-	ASSERT(S_ISREG(VFS_I(ip)->i_mode));
-
-	pip = xfs_filestream_get_parent(ip);
-	if (!pip)
-		return NULLAGNUMBER;
-
-	mru = xfs_mru_cache_lookup(mp->m_filestream, pip->i_ino);
-	if (mru) {
-		ag = container_of(mru, struct xfs_fstrm_item, mru)->ag;
-		xfs_mru_cache_done(mp->m_filestream);
-
-		trace_xfs_filestream_lookup(mp, ip->i_ino, ag);
-		goto out;
-	}
-
-	/*
-	 * Set the starting AG using the rotor for inode32, otherwise
-	 * use the directory inode's AG.
-	 */
-	if (xfs_is_inode32(mp)) {
-		xfs_agnumber_t	 rotorstep = xfs_rotorstep;
-		startag = (mp->m_agfrotor / rotorstep) % mp->m_sb.sb_agcount;
-		mp->m_agfrotor = (mp->m_agfrotor + 1) %
-		                 (mp->m_sb.sb_agcount * rotorstep);
-	} else
-		startag = XFS_INO_TO_AGNO(mp, pip->i_ino);
-
-	if (xfs_filestream_pick_ag(pip, startag, &ag, 0, 0))
-		ag = NULLAGNUMBER;
-out:
-	xfs_irele(pip);
-	return ag;
-}
-
 /*
  * Pick a new allocation group for the current file and its file stream.
  *
@@ -359,66 +310,6 @@ xfs_filestream_new_ag(
 	return err;
 }
 
-static int
-xfs_filestreams_select_lengths(
-	struct xfs_bmalloca	*ap,
-	struct xfs_alloc_arg	*args,
-	xfs_extlen_t		*blen)
-{
-	struct xfs_mount	*mp = ap->ip->i_mount;
-	struct xfs_perag	*pag;
-	xfs_agnumber_t		start_agno;
-	int			error;
-
-	args->total = ap->total;
-
-	start_agno = XFS_FSB_TO_AGNO(mp, ap->blkno);
-	if (start_agno == NULLAGNUMBER)
-		start_agno = 0;
-
-	pag = xfs_perag_grab(mp, start_agno);
-	if (pag) {
-		error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
-		xfs_perag_rele(pag);
-		if (error) {
-			if (error != -EAGAIN)
-				return error;
-			*blen = 0;
-		}
-	}
-
-	if (*blen < args->maxlen) {
-		xfs_agnumber_t	agno = start_agno;
-
-		error = xfs_filestream_new_ag(ap, &agno);
-		if (error)
-			return error;
-		if (agno == NULLAGNUMBER)
-			goto out_select;
-
-		pag = xfs_perag_grab(mp, agno);
-		if (!pag)
-			goto out_select;
-
-		error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
-		xfs_perag_rele(pag);
-		if (error) {
-			if (error != -EAGAIN)
-				return error;
-			*blen = 0;
-		}
-		start_agno = agno;
-	}
-
-out_select:
-	/*
-	 * Set the failure fallback case to look in the selected AG as stream
-	 * may have moved.
-	 */
-	ap->blkno = args->fsbno = XFS_AGB_TO_FSB(mp, start_agno, 0);
-	return 0;
-}
-
 /*
  * Search for an allocation group with a single extent large enough for
  * the request.  If one isn't found, then the largest available free extent is
@@ -430,12 +321,59 @@ xfs_filestream_select_ag(
 	struct xfs_alloc_arg	*args,
 	xfs_extlen_t		*blen)
 {
-	xfs_agnumber_t		start_agno = xfs_filestream_lookup_ag(ap->ip);
+	struct xfs_mount	*mp = ap->ip->i_mount;
+	struct xfs_perag	*pag;
+	struct xfs_inode	*pip = NULL;
+	xfs_agnumber_t		agno = NULLAGNUMBER;
+	struct xfs_mru_cache_elem *mru;
+	int			error;
 
-	/* Determine the initial block number we will target for allocation. */
-	if (start_agno == NULLAGNUMBER)
-		start_agno = 0;
-	ap->blkno = XFS_AGB_TO_FSB(args->mp, start_agno, 0);
+	args->total = ap->total;
+	*blen = 0;
+
+	pip = xfs_filestream_get_parent(ap->ip);
+	if (!pip) {
+		agno = 0;
+		goto new_ag;
+	}
+
+	mru = xfs_mru_cache_lookup(mp->m_filestream, pip->i_ino);
+	if (mru) {
+		agno = container_of(mru, struct xfs_fstrm_item, mru)->ag;
+		xfs_mru_cache_done(mp->m_filestream);
+
+		trace_xfs_filestream_lookup(mp, ap->ip->i_ino, agno);
+		xfs_irele(pip);
+
+		ap->blkno = XFS_AGB_TO_FSB(args->mp, agno, 0);
+		xfs_bmap_adjacent(ap);
+
+		pag = xfs_perag_grab(mp, agno);
+		if (pag) {
+			error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
+			xfs_perag_rele(pag);
+			if (error) {
+				if (error != -EAGAIN)
+					return error;
+				*blen = 0;
+			}
+		}
+		if (*blen >= args->maxlen)
+			goto out_select;
+	} else if (xfs_is_inode32(mp)) {
+		xfs_agnumber_t	 rotorstep = xfs_rotorstep;
+		agno = (mp->m_agfrotor / rotorstep) %
+				mp->m_sb.sb_agcount;
+		mp->m_agfrotor = (mp->m_agfrotor + 1) %
+				 (mp->m_sb.sb_agcount * rotorstep);
+		xfs_irele(pip);
+	} else {
+		agno = XFS_INO_TO_AGNO(mp, pip->i_ino);
+		xfs_irele(pip);
+	}
+
+new_ag:
+	ap->blkno = XFS_AGB_TO_FSB(args->mp, agno, 0);
 	xfs_bmap_adjacent(ap);
 
 	/*
@@ -446,14 +384,32 @@ xfs_filestream_select_ag(
 	if (ap->tp->t_flags & XFS_TRANS_LOWMODE)
 		return 0;
 
-	/*
-	 * Search for an allocation group with a single extent large enough for
-	 * the request.  If one isn't found, then adjust the minimum allocation
-	 * size to the largest space found.
-	 */
-	return xfs_filestreams_select_lengths(ap, args, blen);
+	error = xfs_filestream_new_ag(ap, &agno);
+	if (error)
+		return error;
+	if (agno == NULLAGNUMBER) {
+		agno = 0;
+		goto out_select;
+	}
+
+	pag = xfs_perag_grab(mp, agno);
+	if (!pag)
+		goto out_select;
+
+	error = xfs_bmap_longest_free_extent(pag, args->tp, blen);
+	xfs_perag_rele(pag);
+	if (error) {
+		if (error != -EAGAIN)
+			return error;
+		*blen = 0;
+	}
+
+out_select:
+	ap->blkno = XFS_AGB_TO_FSB(mp, agno, 0);
+	return 0;
 }
 
+
 void
 xfs_filestream_deassociate(
 	struct xfs_inode	*ip)
-- 
2.39.0


  parent reply	other threads:[~2023-02-09 22:26 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-09 22:17 [PATCH v3 00/42] xfs: per-ag centric allocation alogrithms Dave Chinner
2023-02-09 22:17 ` [PATCH 01/42] xfs: fix low space alloc deadlock Dave Chinner
2023-02-09 22:17 ` [PATCH 02/42] xfs: prefer free inodes at ENOSPC over chunk allocation Dave Chinner
2023-02-09 22:17 ` [PATCH 03/42] xfs: block reservation too large for minleft allocation Dave Chinner
2023-02-09 22:17 ` [PATCH 04/42] xfs: drop firstblock constraints from allocation setup Dave Chinner
2023-02-09 22:17 ` [PATCH 05/42] xfs: t_firstblock is tracking AGs not blocks Dave Chinner
2023-02-09 22:17 ` [PATCH 06/42] xfs: don't assert fail on transaction cancel with deferred ops Dave Chinner
2023-02-09 22:17 ` [PATCH 07/42] xfs: active perag reference counting Dave Chinner
2023-02-11  4:06   ` Darrick J. Wong
2023-02-09 22:17 ` [PATCH 08/42] xfs: rework the perag trace points to be perag centric Dave Chinner
2023-02-09 22:17 ` [PATCH 09/42] xfs: convert xfs_imap() to take a perag Dave Chinner
2023-02-09 22:17 ` [PATCH 10/42] xfs: use active perag references for inode allocation Dave Chinner
2023-02-09 22:17 ` [PATCH 11/42] xfs: inobt can use perags in many more places than it does Dave Chinner
2023-02-09 22:17 ` [PATCH 12/42] xfs: convert xfs_ialloc_next_ag() to an atomic Dave Chinner
2023-02-09 22:17 ` [PATCH 13/42] xfs: perags need atomic operational state Dave Chinner
2023-02-09 22:17 ` [PATCH 14/42] xfs: introduce xfs_for_each_perag_wrap() Dave Chinner
2023-02-09 22:17 ` [PATCH 15/42] xfs: rework xfs_alloc_vextent() Dave Chinner
2023-02-09 22:17 ` [PATCH 16/42] xfs: factor xfs_alloc_vextent_this_ag() for _iterate_ags() Dave Chinner
2023-02-09 22:18 ` [PATCH 17/42] xfs: combine __xfs_alloc_vextent_this_ag and xfs_alloc_ag_vextent Dave Chinner
2023-02-09 22:18 ` [PATCH 18/42] xfs: use xfs_alloc_vextent_this_ag() where appropriate Dave Chinner
2023-02-09 22:18 ` [PATCH 19/42] xfs: factor xfs_bmap_btalloc() Dave Chinner
2023-02-09 22:18 ` [PATCH 20/42] xfs: use xfs_alloc_vextent_first_ag() where appropriate Dave Chinner
2023-02-09 22:18 ` [PATCH 21/42] xfs: use xfs_alloc_vextent_start_bno() " Dave Chinner
2023-02-09 22:18 ` [PATCH 22/42] xfs: introduce xfs_alloc_vextent_near_bno() Dave Chinner
2023-02-09 22:18 ` [PATCH 23/42] xfs: introduce xfs_alloc_vextent_exact_bno() Dave Chinner
2023-02-09 22:18 ` [PATCH 24/42] xfs: introduce xfs_alloc_vextent_prepare() Dave Chinner
2023-02-09 22:18 ` [PATCH 25/42] xfs: move allocation accounting to xfs_alloc_vextent_set_fsbno() Dave Chinner
2023-02-09 22:18 ` [PATCH 26/42] xfs: fold xfs_alloc_ag_vextent() into callers Dave Chinner
2023-02-09 22:18 ` [PATCH 27/42] xfs: move the minimum agno checks into xfs_alloc_vextent_check_args Dave Chinner
2023-02-09 22:18 ` [PATCH 28/42] xfs: convert xfs_alloc_vextent_iterate_ags() to use perag walker Dave Chinner
2023-02-09 22:18 ` [PATCH 29/42] xfs: convert trim to use for_each_perag_range Dave Chinner
2023-02-09 22:18 ` [PATCH 30/42] xfs: factor out filestreams from xfs_bmap_btalloc_nullfb Dave Chinner
2023-02-09 22:18 ` [PATCH 31/42] xfs: get rid of notinit from xfs_bmap_longest_free_extent Dave Chinner
2023-02-09 22:18 ` [PATCH 32/42] xfs: use xfs_bmap_longest_free_extent() in filestreams Dave Chinner
2023-02-09 22:18 ` [PATCH 33/42] xfs: move xfs_bmap_btalloc_filestreams() to xfs_filestreams.c Dave Chinner
2023-02-09 22:18 ` Dave Chinner [this message]
2023-02-09 22:18 ` [PATCH 35/42] xfs: merge new filestream AG selection into xfs_filestream_select_ag() Dave Chinner
2023-02-09 22:18 ` [PATCH 36/42] xfs: remove xfs_filestream_select_ag() longest extent check Dave Chinner
2023-02-09 22:18 ` [PATCH 37/42] xfs: factor out MRU hit case in xfs_filestream_select_ag Dave Chinner
2023-02-09 22:18 ` [PATCH 38/42] xfs: track an active perag reference in filestreams Dave Chinner
2023-02-09 22:18 ` [PATCH 39/42] xfs: use for_each_perag_wrap in xfs_filestream_pick_ag Dave Chinner
2023-02-09 22:18 ` [PATCH 40/42] xfs: pass perag to filestreams tracing Dave Chinner
2023-02-09 22:18 ` [PATCH 41/42] xfs: return a referenced perag from filestreams allocator Dave Chinner
2023-02-09 22:18 ` [PATCH 42/42] xfs: refactor the filestreams allocator pick functions Dave Chinner
2023-02-10  3:09 ` [PATCH v3 00/42] xfs: per-ag centric allocation alogrithms Darrick J. Wong
2023-02-10  5:00   ` Dave Chinner
  -- strict thread matches above, loose matches on Subject: below --
2023-01-18 22:44 [PATCH " Dave Chinner
2023-01-18 22:44 ` [PATCH 34/42] xfs: merge filestream AG lookup into xfs_filestream_select_ag() Dave Chinner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230209221825.3722244-35-david@fromorbit.com \
    --to=david@fromorbit.com \
    --cc=linux-xfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.