From: Robert Marko <robert.marko@sartura.hr> To: andrew@lunn.ch, gregory.clement@bootlin.com, sebastian.hesselbarth@gmail.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Robert Marko <robert.marko@sartura.hr> Subject: [PATCH] arm64: dts: marvell: mochabin: enlarge PCI memory window Date: Sun, 19 Feb 2023 13:14:18 +0100 [thread overview] Message-ID: <20230219121418.1395401-1-robert.marko@sartura.hr> (raw) Armada 7040 uses a rather small 15MB memory window for every PCI adapter, however this is not sufficient for Qualcomm QCA6390 802.11ax cards that are shipped along with the OpenWrt WLAN model of MOCHAbin as ath11k requires at least 16MB of memory. So, similar to what MACCHIATOBin has been doing for years, lets move to using the second PCIe 2 memory window and expand it to 128MB to make it future proof. Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 7ca71f2d7afb..39ce6e25a8ef 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -455,4 +455,5 @@ &cp0_pcie2 { phys = <&cp0_comphy5 2>; phy-names = "cp0-pcie2-x1-phy"; reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>; }; -- 2.39.2
WARNING: multiple messages have this Message-ID (diff)
From: Robert Marko <robert.marko@sartura.hr> To: andrew@lunn.ch, gregory.clement@bootlin.com, sebastian.hesselbarth@gmail.com, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Robert Marko <robert.marko@sartura.hr> Subject: [PATCH] arm64: dts: marvell: mochabin: enlarge PCI memory window Date: Sun, 19 Feb 2023 13:14:18 +0100 [thread overview] Message-ID: <20230219121418.1395401-1-robert.marko@sartura.hr> (raw) Armada 7040 uses a rather small 15MB memory window for every PCI adapter, however this is not sufficient for Qualcomm QCA6390 802.11ax cards that are shipped along with the OpenWrt WLAN model of MOCHAbin as ath11k requires at least 16MB of memory. So, similar to what MACCHIATOBin has been doing for years, lets move to using the second PCIe 2 memory window and expand it to 128MB to make it future proof. Signed-off-by: Robert Marko <robert.marko@sartura.hr> --- arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts index 7ca71f2d7afb..39ce6e25a8ef 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts @@ -455,4 +455,5 @@ &cp0_pcie2 { phys = <&cp0_comphy5 2>; phy-names = "cp0-pcie2-x1-phy"; reset-gpios = <&cp0_gpio1 9 GPIO_ACTIVE_LOW>; + ranges = <0x82000000 0x0 0xc0000000 0x0 0xc0000000 0x0 0x8000000>; }; -- 2.39.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-02-19 12:14 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-02-19 12:14 Robert Marko [this message] 2023-02-19 12:14 ` [PATCH] arm64: dts: marvell: mochabin: enlarge PCI memory window Robert Marko 2023-04-07 15:01 ` Gregory CLEMENT 2023-04-07 15:01 ` Gregory CLEMENT
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230219121418.1395401-1-robert.marko@sartura.hr \ --to=robert.marko@sartura.hr \ --cc=andrew@lunn.ch \ --cc=devicetree@vger.kernel.org \ --cc=gregory.clement@bootlin.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=sebastian.hesselbarth@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.