From: Danila Tikhonov <danila@jiaxyga.com> To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, vkoul@kernel.org, kishon@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, davidwronek@gmail.com, Danila Tikhonov <danila@jiaxyga.com> Subject: [PATCH 2/2] phy: qcom-qmp-ufs: Add SM7150 support Date: Thu, 9 Mar 2023 21:50:49 +0300 [thread overview] Message-ID: <20230309185049.170878-3-danila@jiaxyga.com> (raw) In-Reply-To: <20230309185049.170878-1-danila@jiaxyga.com> From: David Wronek <davidwronek@gmail.com> Add the tables and constants for init sequences for UFS QMP phy found in SM7150 SoC. Signed-off-by: David Wronek <davidwronek@gmail.com> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> --- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 57 +++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 994ddd5d4a81..b4f2d6c63beb 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -349,6 +349,36 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02), }; +static const struct qmp_phy_init_tbl sm7150_ufsphy_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59), +}; + +static const struct qmp_phy_init_tbl sm7150_ufsphy_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2, 0x6f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xFF), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02), +};) + static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9), QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11), @@ -911,6 +941,30 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = { .no_pcs_sw_reset = true, }; +static const struct qmp_phy_cfg sm7150_ufsphy_cfg = { + .lanes = 1, + + .tbls = { + .serdes = sdm845_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sdm845_ufsphy_serdes), + .tx = sdm845_ufsphy_tx, + .tx_num = ARRAY_SIZE(sdm845_ufsphy_tx), + .rx = sm7150_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm7150_ufsphy_rx), + .pcs = sm7150_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm7150_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sdm845_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sdm845_ufsphy_hs_b_serdes), + }, + .clk_list = sdm845_ufs_phy_clk_l, + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = ufsphy_v3_regs_layout, +}; + static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .lanes = 2, @@ -1560,6 +1614,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = { }, { .compatible = "qcom,sm6350-qmp-ufs-phy", .data = &sdm845_ufsphy_cfg, + }, { + .compatible = "qcom,sm7150-qmp-ufs-phy", + .data = &sm7150_ufsphy_cfg, }, { .compatible = "qcom,sm8150-qmp-ufs-phy", .data = &sm8150_ufsphy_cfg, -- 2.39.2
WARNING: multiple messages have this Message-ID (diff)
From: Danila Tikhonov <danila@jiaxyga.com> To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, vkoul@kernel.org, kishon@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, davidwronek@gmail.com, Danila Tikhonov <danila@jiaxyga.com> Subject: [PATCH 2/2] phy: qcom-qmp-ufs: Add SM7150 support Date: Thu, 9 Mar 2023 21:50:49 +0300 [thread overview] Message-ID: <20230309185049.170878-3-danila@jiaxyga.com> (raw) In-Reply-To: <20230309185049.170878-1-danila@jiaxyga.com> From: David Wronek <davidwronek@gmail.com> Add the tables and constants for init sequences for UFS QMP phy found in SM7150 SoC. Signed-off-by: David Wronek <davidwronek@gmail.com> Signed-off-by: Danila Tikhonov <danila@jiaxyga.com> --- drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 57 +++++++++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c index 994ddd5d4a81..b4f2d6c63beb 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c @@ -349,6 +349,36 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs[] = { QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02), }; +static const struct qmp_phy_init_tbl sm7150_ufsphy_rx[] = { + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x5b), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80), + QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x59), +}; + +static const struct qmp_phy_init_tbl sm7150_ufsphy_pcs[] = { + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL2, 0x6f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_LARGE_AMP_DRV_LVL, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_SMALL_AMP_DRV_LVL, 0x02), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SYM_RESYNC_CTRL, 0x03), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_TX_MID_TERM_CTRL1, 0x43), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_SIGDET_CTRL1, 0x0f), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_RX_MIN_HIBERN8_TIME, 0xFF), + QMP_PHY_INIT_CFG(QPHY_V3_PCS_UFS_MULTI_LANE_CTRL1, 0x02), +};) + static const struct qmp_phy_init_tbl sm8150_ufsphy_serdes[] = { QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0xd9), QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x11), @@ -911,6 +941,30 @@ static const struct qmp_phy_cfg sm6115_ufsphy_cfg = { .no_pcs_sw_reset = true, }; +static const struct qmp_phy_cfg sm7150_ufsphy_cfg = { + .lanes = 1, + + .tbls = { + .serdes = sdm845_ufsphy_serdes, + .serdes_num = ARRAY_SIZE(sdm845_ufsphy_serdes), + .tx = sdm845_ufsphy_tx, + .tx_num = ARRAY_SIZE(sdm845_ufsphy_tx), + .rx = sm7150_ufsphy_rx, + .rx_num = ARRAY_SIZE(sm7150_ufsphy_rx), + .pcs = sm7150_ufsphy_pcs, + .pcs_num = ARRAY_SIZE(sm7150_ufsphy_pcs), + }, + .tbls_hs_b = { + .serdes = sdm845_ufsphy_hs_b_serdes, + .serdes_num = ARRAY_SIZE(sdm845_ufsphy_hs_b_serdes), + }, + .clk_list = sdm845_ufs_phy_clk_l, + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l), + .vreg_list = qmp_phy_vreg_l, + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), + .regs = ufsphy_v3_regs_layout, +}; + static const struct qmp_phy_cfg sm8150_ufsphy_cfg = { .lanes = 2, @@ -1560,6 +1614,9 @@ static const struct of_device_id qmp_ufs_of_match_table[] = { }, { .compatible = "qcom,sm6350-qmp-ufs-phy", .data = &sdm845_ufsphy_cfg, + }, { + .compatible = "qcom,sm7150-qmp-ufs-phy", + .data = &sm7150_ufsphy_cfg, }, { .compatible = "qcom,sm8150-qmp-ufs-phy", .data = &sm8150_ufsphy_cfg, -- 2.39.2 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2023-03-09 18:51 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-03-09 18:50 [PATCH 0/2] phy: qcom-qmp-ufs: Add support for SM7150 Danila Tikhonov 2023-03-09 18:50 ` Danila Tikhonov 2023-03-09 18:50 ` [PATCH 1/2] dt-bindings: phy: Add QMP UFS PHY comptible " Danila Tikhonov 2023-03-09 18:50 ` Danila Tikhonov 2023-03-09 20:44 ` Dmitry Baryshkov 2023-03-09 20:44 ` Dmitry Baryshkov 2023-03-09 18:50 ` Danila Tikhonov [this message] 2023-03-09 18:50 ` [PATCH 2/2] phy: qcom-qmp-ufs: Add SM7150 support Danila Tikhonov 2023-03-09 20:51 ` Dmitry Baryshkov 2023-03-09 20:51 ` Dmitry Baryshkov 2023-03-09 21:31 ` kernel test robot 2023-03-09 21:31 ` kernel test robot 2023-03-09 22:42 ` kernel test robot 2023-03-09 22:42 ` kernel test robot
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230309185049.170878-3-danila@jiaxyga.com \ --to=danila@jiaxyga.com \ --cc=agross@kernel.org \ --cc=andersson@kernel.org \ --cc=davidwronek@gmail.com \ --cc=devicetree@vger.kernel.org \ --cc=kishon@kernel.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-phy@lists.infradead.org \ --cc=robh+dt@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.