[PATCH 5/5] arm64: dts: qcom: sdm845-shift-axolotl: update focaltech touchscreen properties

[Joel Selvaraj <joelselvaraj.oss@gmail.com>]

The touchscreen nodes were added before the driver patches were merged.
Update the focaltech touchscreen properties to match with the upstreamed
focaltech driver. Also, the touchscreen used is in axolotl is fts5452
and not fts8719.

Signed-off-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
---
 .../boot/dts/qcom/sdm845-shift-axolotl.dts      | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index b54e304abf71..39f59ee3612a 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -473,21 +473,22 @@ zap-shader {
 &i2c5 {
 	status = "okay";
 
-	touchscreen@38 {
-		compatible = "focaltech,fts8719";
+	touchscreen: focaltech@38 {
+		compatible = "focaltech,fts5452";
 		reg = <0x38>;
-		wakeup-source;
+
 		interrupt-parent = <&tlmm>;
-		interrupts = <125 0x2>;
-		vdd-supply = <&vreg_l28a_3p0>;
-		vcc-i2c-supply = <&vreg_l14a_1p88>;
+		interrupts = <125 IRQ_TYPE_EDGE_FALLING>;
+
+		avdd-supply = <&vreg_l28a_3p0>;
+		vddio-supply = <&vreg_l14a_1p88>;
 
 		pinctrl-names = "default", "suspend";
 		pinctrl-0 = <&ts_int_active &ts_reset_active>;
 		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
 
-		reset-gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
-		irq-gpio = <&tlmm 125 GPIO_TRANSITORY>;
+		reset-gpios = <&tlmm 99 GPIO_ACTIVE_LOW>;
+
 		touchscreen-size-x = <1080>;
 		touchscreen-size-y = <2160>;
 		focaltech,max-touch-number = <5>;
-- 
2.39.2