From: Jai Luthra <j-luthra@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Mark Brown <broonie@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Jai Luthra <j-luthra@ti.com>
Subject: [PATCH v5 0/6] arm64: ti: Enable audio on AM62 and AM62A
Date: Mon, 13 Mar 2023 20:19:29 +0530 [thread overview]
Message-ID: <20230313-mcasp_upstream-v5-0-d6844707aa8a@ti.com> (raw)
This patch series adds support for audio output via headphone jack on
SK-AM62 and SK-AM62A boards. The jack is wired to TLV320AIC3106 (codec),
which is connected to McASP1 (serializer) on the SoC.
The TRRS 3.5mm jack can be used for simultaneous playback and recording.
v5:
- Ported codec bindings to dtschema
- Add audio drivers in arm64 defconfig
- Keep McASP nodes disabled in SoC dtsi
- Enable audio-input for AM62
- Enable same feature-set for AM62A
v4: https://lore.kernel.org/all/20220620102750.32718-1-j-luthra@ti.com/
Signed-off-by: Jai Luthra <j-luthra@ti.com>
---
Jai Luthra (5):
arm64: defconfig: Enable audio drivers for TI K3 SoCs
arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK
arm64: dts: ti: k3-am62a-main: Add nodes for McASP
arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators
arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A
Jayesh Choudhary (1):
arm64: dts: ti: k3-am62-main: Add McASP nodes
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 60 ++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am625-sk.dts | 88 +++++++++++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 60 ++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 92 ++++++++++++++++++++++++++++++-
arch/arm64/configs/defconfig | 2 +
5 files changed, 300 insertions(+), 2 deletions(-)
---
base-commit: 24469a0e5052ba01a35a15f104717a82b7a4798b
change-id: 20230313-mcasp_upstream-0e137013059b
Best regards,
--
Jai Luthra <j-luthra@ti.com>
WARNING: multiple messages have this Message-ID (diff)
From: Jai Luthra <j-luthra@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>, Mark Brown <broonie@kernel.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Jai Luthra <j-luthra@ti.com>
Subject: [PATCH v5 0/6] arm64: ti: Enable audio on AM62 and AM62A
Date: Mon, 13 Mar 2023 20:19:29 +0530 [thread overview]
Message-ID: <20230313-mcasp_upstream-v5-0-d6844707aa8a@ti.com> (raw)
This patch series adds support for audio output via headphone jack on
SK-AM62 and SK-AM62A boards. The jack is wired to TLV320AIC3106 (codec),
which is connected to McASP1 (serializer) on the SoC.
The TRRS 3.5mm jack can be used for simultaneous playback and recording.
v5:
- Ported codec bindings to dtschema
- Add audio drivers in arm64 defconfig
- Keep McASP nodes disabled in SoC dtsi
- Enable audio-input for AM62
- Enable same feature-set for AM62A
v4: https://lore.kernel.org/all/20220620102750.32718-1-j-luthra@ti.com/
Signed-off-by: Jai Luthra <j-luthra@ti.com>
---
Jai Luthra (5):
arm64: defconfig: Enable audio drivers for TI K3 SoCs
arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK
arm64: dts: ti: k3-am62a-main: Add nodes for McASP
arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators
arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A
Jayesh Choudhary (1):
arm64: dts: ti: k3-am62-main: Add McASP nodes
arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 60 ++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am625-sk.dts | 88 +++++++++++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 60 ++++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 92 ++++++++++++++++++++++++++++++-
arch/arm64/configs/defconfig | 2 +
5 files changed, 300 insertions(+), 2 deletions(-)
---
base-commit: 24469a0e5052ba01a35a15f104717a82b7a4798b
change-id: 20230313-mcasp_upstream-0e137013059b
Best regards,
--
Jai Luthra <j-luthra@ti.com>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-03-13 14:51 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-13 14:49 Jai Luthra [this message]
2023-03-13 14:49 ` [PATCH v5 0/6] arm64: ti: Enable audio on AM62 and AM62A Jai Luthra
2023-03-13 14:49 ` [PATCH v5 1/6] arm64: defconfig: Enable audio drivers for TI K3 SoCs Jai Luthra
2023-03-13 14:49 ` Jai Luthra
2023-03-13 14:49 ` [PATCH v5 2/6] arm64: dts: ti: k3-am62-main: Add McASP nodes Jai Luthra
2023-03-13 14:49 ` Jai Luthra
2023-03-13 17:10 ` Andrew Davis
2023-03-13 17:10 ` Andrew Davis
2023-03-13 14:49 ` [PATCH v5 3/6] arm64: dts: ti: k3-am625-sk: Enable audio on AM62 SK Jai Luthra
2023-03-13 14:49 ` Jai Luthra
2023-03-15 4:23 ` Jayesh Choudhary
2023-03-15 4:23 ` Jayesh Choudhary
2023-03-13 14:49 ` [PATCH v5 4/6] arm64: dts: ti: k3-am62a-main: Add nodes for McASP Jai Luthra
2023-03-13 14:49 ` Jai Luthra
2023-03-15 4:28 ` Jayesh Choudhary
2023-03-15 4:28 ` Jayesh Choudhary
2023-03-13 14:49 ` [PATCH v5 5/6] arm64: dts: ti: k3-am62a7-sk: Split vcc_3v3 regulators Jai Luthra
2023-03-13 14:49 ` Jai Luthra
2023-03-13 14:49 ` [PATCH v5 6/6] arm64: dts: ti: k3-am62a7-sk: Enable audio on AM62A Jai Luthra
2023-03-13 14:49 ` Jai Luthra
2023-03-15 4:32 ` Jayesh Choudhary
2023-03-15 4:32 ` Jayesh Choudhary
2023-03-15 6:29 ` Jai Luthra
2023-03-15 6:29 ` Jai Luthra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230313-mcasp_upstream-v5-0-d6844707aa8a@ti.com \
--to=j-luthra@ti.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.