All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philippe Schenker <dev@pschenker.ch>
To: devicetree@vger.kernel.org, Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>,
	Frank Rowand <frowand.list@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Fabio Estevam <festevam@gmail.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org,
	Philippe Schenker <philippe.schenker@toradex.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 10/23] arm64: dts: colibri-imx8x: Add SPI
Date: Tue, 14 Mar 2023 11:23:56 +0100	[thread overview]
Message-ID: <20230314102410.424773-11-dev@pschenker.ch> (raw)
In-Reply-To: <20230314102410.424773-1-dev@pschenker.ch>

From: Philippe Schenker <philippe.schenker@toradex.com>

Add Colibri SPI to the board. lpspi2 is being exposed on the SoM edge.
Add settings to the module-level but finally enable it on the eval-board
dtsi.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

(no changes since v1)

 arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi | 5 +++++
 arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi         | 7 +++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
index dc0339b35a3c..1d0bad085ad4 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -36,6 +36,11 @@ rtc_i2c: rtc@68 {
 	};
 };
 
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+};
+
 /* Colibri UART_B */
 &lpuart0 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index cd7de71c6d73..a2364845e976 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -91,6 +91,13 @@ ethphy0: ethernet-phy@2 {
 	};
 };
 
+/* Colibri SPI */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+};
+
 /* On-module eMMC */
 &usdhc1 {
 	bus-width = <8>;
-- 
2.39.2


WARNING: multiple messages have this Message-ID (diff)
From: Philippe Schenker <dev@pschenker.ch>
To: devicetree@vger.kernel.org, Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>,
	Frank Rowand <frowand.list@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Fabio Estevam <festevam@gmail.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>,
	linux-arm-kernel@lists.infradead.org,
	Philippe Schenker <philippe.schenker@toradex.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 10/23] arm64: dts: colibri-imx8x: Add SPI
Date: Tue, 14 Mar 2023 11:23:56 +0100	[thread overview]
Message-ID: <20230314102410.424773-11-dev@pschenker.ch> (raw)
In-Reply-To: <20230314102410.424773-1-dev@pschenker.ch>

From: Philippe Schenker <philippe.schenker@toradex.com>

Add Colibri SPI to the board. lpspi2 is being exposed on the SoM edge.
Add settings to the module-level but finally enable it on the eval-board
dtsi.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
---

(no changes since v1)

 arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi | 5 +++++
 arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi         | 7 +++++++
 2 files changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
index dc0339b35a3c..1d0bad085ad4 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri-eval-v3.dtsi
@@ -36,6 +36,11 @@ rtc_i2c: rtc@68 {
 	};
 };
 
+/* Colibri SPI */
+&lpspi2 {
+	status = "okay";
+};
+
 /* Colibri UART_B */
 &lpuart0 {
 	status = "okay";
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index cd7de71c6d73..a2364845e976 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -91,6 +91,13 @@ ethphy0: ethernet-phy@2 {
 	};
 };
 
+/* Colibri SPI */
+&lpspi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpspi2>;
+	cs-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_LOW>;
+};
+
 /* On-module eMMC */
 &usdhc1 {
 	bus-width = <8>;
-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2023-03-14 10:25 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-14 10:23 [PATCH v2 00/23] Update Colibri iMX8X Devicetrees Philippe Schenker
2023-03-14 10:23 ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 01/23] arm64: dts: colibri-imx8x: Prepare for qxp and dx variants Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 02/23] arm64: dts: colibri-imx8x: Update spdx license Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 03/23] arm64: dts: colibri-imx8x: Use new bracket format Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 04/23] arm64: dts: colibri-imx8x: Add atmel pinctrl groups Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 05/23] arm64: dts: colibri-imx8x: Add pinctrl group for csi_mclk Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 06/23] arm64: dts: colibri-imx8x: Split pinctrl_hog1 Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 07/23] arm64: dts: colibri-imx8x: Correct pull on lcdif Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 08/23] arm64: dts: colibri-imx8x: Add separate pinctrl group for cs2 Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 09/23] arm64: dts: colibri-imx8x: Add pinctrl group for hdmi hpd Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` Philippe Schenker [this message]
2023-03-14 10:23   ` [PATCH v2 10/23] arm64: dts: colibri-imx8x: Add SPI Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 11/23] arm64: dts: colibri-imx8x: Add gpio-line-names Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 12/23] arm64: dts: colibri-imx8x: Disable touchscreen by default Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:23 ` [PATCH v2 13/23] arm64: dts: colibri-imx8x: Add jpegenc/dec Philippe Schenker
2023-03-14 10:23   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 14/23] arm64: dts: colibri-imx8x: Add colibri pwm b, c, d Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 15/23] arm64: dts: colibri-imx8x: eval: Add spi-to-can Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 16/23] arm64: dts: colibri-imx8x: Add no-1-8-v to sd-card Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 17/23] arm64: dts: colibri-imx8x: Set thermal thresholds Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 18/23] arm64: dts: colibri-imx8x: Move gpio-keys to som level Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 19/23] arm64: dts: colibri-imx8x: Add todo comments Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 20/23] dt-bindings: arm: fsl: Add colibri-imx8x carrier boards Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 21/23] arm64: dts: colibri-imx8x: Add aster carrier board Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 22/23] arm64: dts: colibri-imx8x: Add iris " Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-14 10:24 ` [PATCH v2 23/23] arm64: dts: colibri-imx8x: Add iris v2 " Philippe Schenker
2023-03-14 10:24   ` Philippe Schenker
2023-03-27  2:11 ` [PATCH v2 00/23] Update Colibri iMX8X Devicetrees Shawn Guo
2023-03-27  2:11   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230314102410.424773-11-dev@pschenker.ch \
    --to=dev@pschenker.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=frowand.list@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.