From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Mathias Nyman <mathias.nyman@linux.intel.com>
Subject: [PATCH 06/14] xhci: mem: Replace explicit castings with appropriate specifiers
Date: Fri, 17 Mar 2023 17:47:07 +0200 [thread overview]
Message-ID: <20230317154715.535523-7-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20230317154715.535523-1-mathias.nyman@linux.intel.com>
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is no need to have explicit castings when we have specific pointer
extensions. Replace the explicit castings with appropriate specifiers.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-mem.c | 17 +++++++----------
1 file changed, 7 insertions(+), 10 deletions(-)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index b8c1465f8d23..67ac02d177b5 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -666,8 +666,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
cur_ring->cycle_state;
stream_info->stream_ctx_array[cur_stream].stream_ring =
cpu_to_le64(addr);
- xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n",
- cur_stream, (unsigned long long) addr);
+ xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n", cur_stream, addr);
ret = xhci_update_stream_mapping(cur_ring, mem_flags);
if (ret) {
@@ -977,16 +976,14 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
if (!dev->out_ctx)
goto fail;
- xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dev->out_ctx->dma);
+ xhci_dbg(xhci, "Slot %d output ctx = 0x%pad (dma)\n", slot_id, &dev->out_ctx->dma);
/* Allocate the (input) device context for address device command */
dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
if (!dev->in_ctx)
goto fail;
- xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
- (unsigned long long)dev->in_ctx->dma);
+ xhci_dbg(xhci, "Slot %d input ctx = 0x%pad (dma)\n", slot_id, &dev->in_ctx->dma);
/* Initialize the cancellation and bandwidth list for each ep */
for (i = 0; i < 31; i++) {
@@ -2351,8 +2348,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
goto fail;
xhci->dcbaa->dma = dma;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
- "// Device context base array address = 0x%llx (DMA), %p (virt)",
- (unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
+ "// Device context base array address = 0x%pad (DMA), %p (virt)",
+ &xhci->dcbaa->dma, xhci->dcbaa);
xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
/*
@@ -2393,8 +2390,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
goto fail;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Allocated command ring at %p", xhci->cmd_ring);
- xhci_dbg_trace(xhci, trace_xhci_dbg_init, "First segment DMA is 0x%llx",
- (unsigned long long)xhci->cmd_ring->first_seg->dma);
+ xhci_dbg_trace(xhci, trace_xhci_dbg_init, "First segment DMA is 0x%pad",
+ &xhci->cmd_ring->first_seg->dma);
/* Set the address in the Command Ring Control register */
val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
--
2.25.1
next prev parent reply other threads:[~2023-03-17 15:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-17 15:47 [PATCH 00/14] xhci features for usb-next Mathias Nyman
2023-03-17 15:47 ` [PATCH 01/14] xhci: mem: Carefully calculate size for memory allocations Mathias Nyman
2023-03-17 15:47 ` [PATCH 02/14] xhci: mem: Use dma_poll_zalloc() instead of explicit memset() Mathias Nyman
2023-03-17 15:47 ` [PATCH 03/14] xhci: mem: Get rid of redundant 'else' Mathias Nyman
2023-03-17 15:47 ` [PATCH 04/14] xhci: mem: Drop useless return:s Mathias Nyman
2023-03-17 15:47 ` [PATCH 05/14] xhci: mem: Use while (i--) pattern to clean up Mathias Nyman
2023-03-17 15:47 ` Mathias Nyman [this message]
2023-03-17 15:47 ` [PATCH 07/14] xhci: mem: Join string literals back Mathias Nyman
2023-03-17 15:47 ` [PATCH 08/14] xhci: dbc: Provide sysfs option to configure dbc descriptors Mathias Nyman
2023-03-17 15:47 ` [PATCH 09/14] xhci: Avoid PCI MSI/MSIX interrupt reinitialization at resume Mathias Nyman
2023-03-17 15:47 ` [PATCH 10/14] xhci: Move functions to setup msi to xhci-pci Mathias Nyman
2023-03-17 15:47 ` [PATCH 11/14] xhci: move PCI specific MSI/MSIX cleanup away from generic xhci functions Mathias Nyman
2023-03-17 15:47 ` [PATCH 12/14] xhci: Move functions to cleanup MSI to xhci-pci Mathias Nyman
2023-03-17 15:47 ` [PATCH 13/14] xhci: Call MSI sync function from xhci-pci instead of generic xhci code Mathias Nyman
2023-03-17 15:47 ` [PATCH 14/14] xhci: Move xhci MSI sync function to to xhci-pci Mathias Nyman
2023-03-17 15:53 ` [PATCH 00/14] xhci features for usb-next Mathias Nyman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230317154715.535523-7-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.