From: Tianling Shen <cnsztl@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Jagan Teki <jagan@amarulasolutions.com>,
Peter Geis <pgwipeout@gmail.com>, Andy Yan <andyshrk@163.com>,
Tianling Shen <cnsztl@gmail.com>,
Brian Norris <briannorris@chromium.org>,
Chris Morgan <macromorgan@hotmail.com>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Andrew Lunn <andrew@lunn.ch>,
Michael Riesch <michael.riesch@wolfvision.net>,
Maya Matuszczyk <maccraft123mc@gmail.com>,
Andrew Powers-Holmes <aholmes@omnom.net>,
Sascha Hauer <s.hauer@pengutronix.de>,
Vasily Khoruzhick <anarsoul@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/5] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5 series
Date: Sat, 18 Mar 2023 16:37:45 +0800 [thread overview]
Message-ID: <20230318083745.6181-6-cnsztl@gmail.com> (raw)
In-Reply-To: <20230318083745.6181-1-cnsztl@gmail.com>
This is for the audio output which does not exist on the boards.
Also disable regulator-always-on for vccio_acodec since it's only
used by the audio output.
Fixes: c6629b9a6738 ("arm64: dts: rockchip: Add FriendlyElec Nanopi R5S")
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
index dd9a7907a1c5..58ba328ea782 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -330,7 +330,6 @@ regulator-state-mem {
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
- regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -441,11 +440,6 @@ &i2s0_8ch {
status = "okay";
};
-&i2s1_8ch {
- rockchip,trcm-sync-tx-only;
- status = "okay";
-};
-
&pcie30phy {
data-lanes = <1 2>;
status = "okay";
--
2.40.0
WARNING: multiple messages have this Message-ID (diff)
From: Tianling Shen <cnsztl@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Jagan Teki <jagan@amarulasolutions.com>,
Peter Geis <pgwipeout@gmail.com>, Andy Yan <andyshrk@163.com>,
Tianling Shen <cnsztl@gmail.com>,
Brian Norris <briannorris@chromium.org>,
Chris Morgan <macromorgan@hotmail.com>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Andrew Lunn <andrew@lunn.ch>,
Michael Riesch <michael.riesch@wolfvision.net>,
Maya Matuszczyk <maccraft123mc@gmail.com>,
Andrew Powers-Holmes <aholmes@omnom.net>,
Sascha Hauer <s.hauer@pengutronix.de>,
Vasily Khoruzhick <anarsoul@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/5] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5 series
Date: Sat, 18 Mar 2023 16:37:45 +0800 [thread overview]
Message-ID: <20230318083745.6181-6-cnsztl@gmail.com> (raw)
In-Reply-To: <20230318083745.6181-1-cnsztl@gmail.com>
This is for the audio output which does not exist on the boards.
Also disable regulator-always-on for vccio_acodec since it's only
used by the audio output.
Fixes: c6629b9a6738 ("arm64: dts: rockchip: Add FriendlyElec Nanopi R5S")
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
index dd9a7907a1c5..58ba328ea782 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -330,7 +330,6 @@ regulator-state-mem {
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
- regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -441,11 +440,6 @@ &i2s0_8ch {
status = "okay";
};
-&i2s1_8ch {
- rockchip,trcm-sync-tx-only;
- status = "okay";
-};
-
&pcie30phy {
data-lanes = <1 2>;
status = "okay";
--
2.40.0
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Tianling Shen <cnsztl@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Jagan Teki <jagan@amarulasolutions.com>,
Peter Geis <pgwipeout@gmail.com>, Andy Yan <andyshrk@163.com>,
Tianling Shen <cnsztl@gmail.com>,
Brian Norris <briannorris@chromium.org>,
Chris Morgan <macromorgan@hotmail.com>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Andrew Lunn <andrew@lunn.ch>,
Michael Riesch <michael.riesch@wolfvision.net>,
Maya Matuszczyk <maccraft123mc@gmail.com>,
Andrew Powers-Holmes <aholmes@omnom.net>,
Sascha Hauer <s.hauer@pengutronix.de>,
Vasily Khoruzhick <anarsoul@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 5/5] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5 series
Date: Sat, 18 Mar 2023 16:37:45 +0800 [thread overview]
Message-ID: <20230318083745.6181-6-cnsztl@gmail.com> (raw)
In-Reply-To: <20230318083745.6181-1-cnsztl@gmail.com>
This is for the audio output which does not exist on the boards.
Also disable regulator-always-on for vccio_acodec since it's only
used by the audio output.
Fixes: c6629b9a6738 ("arm64: dts: rockchip: Add FriendlyElec Nanopi R5S")
Signed-off-by: Tianling Shen <cnsztl@gmail.com>
---
arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
index dd9a7907a1c5..58ba328ea782 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-nanopi-r5s.dtsi
@@ -330,7 +330,6 @@ regulator-state-mem {
vccio_acodec: LDO_REG4 {
regulator-name = "vccio_acodec";
- regulator-always-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -441,11 +440,6 @@ &i2s0_8ch {
status = "okay";
};
-&i2s1_8ch {
- rockchip,trcm-sync-tx-only;
- status = "okay";
-};
-
&pcie30phy {
data-lanes = <1 2>;
status = "okay";
--
2.40.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-18 8:38 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-18 8:37 [PATCH v2 0/5] arm64: dts: rockchip: improve support for NanoPi R5 series Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` [PATCH v2 1/5] arm64: dts: rockchip: create common dtsi " Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` [PATCH v2 2/5] dt-bindings: Add doc for FriendlyARM NanoPi R5C Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` [PATCH v2 3/5] arm64: dts: rockchip: Add " Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` [PATCH v2 4/5] arm64: dts: rockchip: fix gmac support for NanoPi R5S Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-18 8:37 ` Tianling Shen [this message]
2023-03-18 8:37 ` [PATCH v2 5/5] arm64: dts: rockchip: remove I2S1 TDM node for the NanoPi R5 series Tianling Shen
2023-03-18 8:37 ` Tianling Shen
2023-03-22 23:40 ` [PATCH v2 0/5] arm64: dts: rockchip: improve support for " Heiko Stuebner
2023-03-22 23:40 ` Heiko Stuebner
2023-03-22 23:40 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230318083745.6181-6-cnsztl@gmail.com \
--to=cnsztl@gmail.com \
--cc=aholmes@omnom.net \
--cc=anarsoul@gmail.com \
--cc=andrew@lunn.ch \
--cc=andyshrk@163.com \
--cc=briannorris@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=jagan@amarulasolutions.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=maccraft123mc@gmail.com \
--cc=macromorgan@hotmail.com \
--cc=michael.riesch@wolfvision.net \
--cc=pgwipeout@gmail.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=sebastian.reichel@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.