All of lore.kernel.org
 help / color / mirror / Atom feed
From: "buddy.zhang" <buddy.zhang@biscuitos.cn>
To: akpm@linux-foundation.org
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	"buddy.zhang" <buddy.zhang@biscuitos.cn>
Subject: [PATCH] mm: Keep memory type same on DEVMEM Page-Fault
Date: Sun, 19 Mar 2023 11:37:50 +0800	[thread overview]
Message-ID: <20230319033750.475200-1-buddy.zhang@biscuitos.cn> (raw)

On X86 architecture, supports memory type on Page-table, such as
PTE is PAT/PCD/PWD, which can setup up Memory Type as WC/WB/WT/UC etc.
Then, Virtual address from userspace or kernel space can map to
same physical page, if each page table has different memory type,
then it's confused to have more memory type for same physical page.

On DEVMEM, the 'remap_pfn_range()' keep memory type same on different
mapping. But if it happen on Page-Fault route, such as code:

 19 static vm_fault_t vm_fault(struct vm_fault *vmf)
 20 {
 21         struct vm_area_struct *vma = vmf->vma;
 22         unsigned long address = vmf->address;
 23         struct page *fault_page;
 24         unsigned long pfn;
 25         int r;
 26
 27         /* Allocate Page as DEVMEM */
 28         fault_page = alloc_page(GFP_KERNEL);
 29         if (!fault_page) {
 30                 printk("ERROR: NO Free Memory from DEVMEM.\n");
 31                 r = -ENOMEM;
 32                 goto err_alloc;
 33         }
 34         pfn = page_to_pfn(fault_page);
 35
 36         /* Clear PAT Attribute */
 37         pgprot_val(vma->vm_page_prot) &= ~(_PAGE_PCD | _PAGE_PWT | _PAGE_PAT);
 38
 39         /* Change Memory Type for Direct-Mapping Area */
 40         arch_io_reserve_memtype_wc(PFN_PHYS(pfn), PAGE_SIZE);
 41         pgprot_val(vma->vm_page_prot) |= cachemode2protval(_PAGE_CACHE_MODE_WT);
 42
 43         /* Establish pte and INC _mapcount for page */
 44         vm_flags_set(vma, VM_MIXEDMAP);
 45         if (vm_insert_page(vma, address, fault_page))
 46                 return -EAGAIN;
 47
 48         /* Add refcount for page */
 49         atomic_inc(&fault_page->_refcount);
 50         /* bind fault page */
 51         vmf->page = fault_page;
 52
 53         return 0;
 54
 55 err_alloc:
 56         return r;
 57 }
 58
 59 static const struct vm_operations_struct BiscuitOS_vm_ops = {
 60         .fault  = vm_fault,
 61 };
 62
 63 static int BiscuitOS_mmap(struct file *filp, struct vm_area_struct *vma)
 64 {
 65         /* setup vm_ops */
 66         vma->vm_ops = &BiscuitOS_vm_ops;
 67
 68         return 0;
 69 }

If invoke arch_io_reserve_memtype_wc() on Line-40, and modify memory type
as WC for Direct-Mapping area, and then setup meory type as WT on Line-41,
then invoke 'vm_insert_page()' to create mapping, so you can see:

    | <----- Usespace -----> | <- Kernel space -> |
----+------+---+-------------+---+---+------------+--
    |      |   |             |   |   |            |
----+------+---+-------------+---+---+------------+--
           WT|                     |WC
             o-------o    o--------o
                   WT|    |WC
                     V    V
-------------------+--------+------------------------
                   | DEVMEM |
-------------------+--------+------------------------
Physical Address Space

For this case, OS should check memory type before mapping on 'vm_insert_page()',
and keep memory type same, so add check on function:

07 int vm_insert_page(struct vm_area_struct *vma, unsigned long addr,
08                         struct page *page)
09 {
10         if (addr < vma->vm_start || addr >= vma->vm_end)
11                 return -EFAULT;
12         if (!page_count(page))
13                 return -EINVAL;
14         if (!(vma->vm_flags & VM_MIXEDMAP)) {
15                 BUG_ON(mmap_read_trylock(vma->vm_mm));
16                 BUG_ON(vma->vm_flags & VM_PFNMAP);
17                 vm_flags_set(vma, VM_MIXEDMAP);
18         }
19         if (track_pfn_remap(vma, &vma->vm_page_prot,
20                         page_to_pfn(page), addr, PAGE_SIZE))
21                 return -EINVAL;
22         return insert_page(vma, addr, page, vma->vm_page_prot);
23 }

And line 19 to 21, when mapping different memory type on this route, the
'track_pfn_remap()' will notify error and change request as current, e.g.

x86/PAT: APP:88 map pfn RAM range req write-through for [mem 0x025c1000-0x025c1fff], got write-combining

And then, we can keep memory type same on Page-fault route for DEVMEM, the end:

    | <----- Usespace -----> | <- Kernel space -> |
----+------+---+-------------+---+---+------------+--
    |      |   |             |   |   |            |
----+------+---+-------------+---+---+------------+--
           WT|                     |WC
             o---(X)----o----------o
                        |WC
                        V
-------------------+--------+------------------------
                   | DEVMEM |
-------------------+--------+------------------------

Signed-off-by: buddy.zhang@biscuitos.cn
---
 mm/memory.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/mm/memory.c b/mm/memory.c
index f456f3b5049c..ed3d09f513f1 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1989,6 +1989,9 @@ int vm_insert_page(struct vm_area_struct *vma, unsigned long addr,
 		BUG_ON(vma->vm_flags & VM_PFNMAP);
 		vm_flags_set(vma, VM_MIXEDMAP);
 	}
+	if (track_pfn_remap(vma, &vma->vm_page_prot,
+			page_to_pfn(page), addr, PAGE_SIZE))
+		return -EINVAL;
 	return insert_page(vma, addr, page, vma->vm_page_prot);
 }
 EXPORT_SYMBOL(vm_insert_page);
-- 
2.25.1


             reply	other threads:[~2023-03-19  3:43 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-19  3:37 buddy.zhang [this message]
2023-04-12 21:22 ` [PATCH] mm: Keep memory type same on DEVMEM Page-Fault Andrew Morton
2023-04-16 18:39   ` Andrew Morton
2023-06-19 20:14     ` Andrew Morton
2023-06-28  9:10       ` David Hildenbrand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230319033750.475200-1-buddy.zhang@biscuitos.cn \
    --to=buddy.zhang@biscuitos.cn \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.