From: Andre Przywara <andre.przywara@arm.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Jernej Skrabec <jernej.skrabec@gmail.com>, Samuel Holland <samuel@sholland.org>, Chen-Yu Tsai <wens@csie.org> Cc: linux-sunxi@lists.linux.dev, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Icenowy Zheng <uwu@icenowy.me> Subject: [PATCH v6 1/6] ARM: dts: suniv: add USB-related device nodes Date: Sun, 19 Mar 2023 21:29:31 +0000 [thread overview] Message-ID: <20230319212936.26649-2-andre.przywara@arm.com> (raw) In-Reply-To: <20230319212936.26649-1-andre.przywara@arm.com> From: Icenowy Zheng <uwu@icenowy.me> The suniv SoC has a USB OTG controller and a USB PHY like other Allwinner SoCs. Add their device tree node. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/suniv-f1c100s.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 9455d27e516ee..111f8bbc2a805 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -133,6 +133,32 @@ mmc1: mmc@1c10000 { #size-cells = <0>; }; + usb_otg: usb@1c13000 { + compatible = "allwinner,suniv-f1c100s-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <26>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + }; + + usbphy: phy@1c13400 { + compatible = "allwinner,suniv-f1c100s-usb-phy"; + reg = <0x01c13400 0x10>; + reg-names = "phy_ctrl"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + #phy-cells = <1>; + status = "disabled"; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; -- 2.35.7
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Jernej Skrabec <jernej.skrabec@gmail.com>, Samuel Holland <samuel@sholland.org>, Chen-Yu Tsai <wens@csie.org> Cc: linux-sunxi@lists.linux.dev, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Icenowy Zheng <uwu@icenowy.me> Subject: [PATCH v6 1/6] ARM: dts: suniv: add USB-related device nodes Date: Sun, 19 Mar 2023 21:29:31 +0000 [thread overview] Message-ID: <20230319212936.26649-2-andre.przywara@arm.com> (raw) In-Reply-To: <20230319212936.26649-1-andre.przywara@arm.com> From: Icenowy Zheng <uwu@icenowy.me> The suniv SoC has a USB OTG controller and a USB PHY like other Allwinner SoCs. Add their device tree node. Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/suniv-f1c100s.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/arch/arm/boot/dts/suniv-f1c100s.dtsi b/arch/arm/boot/dts/suniv-f1c100s.dtsi index 9455d27e516ee..111f8bbc2a805 100644 --- a/arch/arm/boot/dts/suniv-f1c100s.dtsi +++ b/arch/arm/boot/dts/suniv-f1c100s.dtsi @@ -133,6 +133,32 @@ mmc1: mmc@1c10000 { #size-cells = <0>; }; + usb_otg: usb@1c13000 { + compatible = "allwinner,suniv-f1c100s-musb"; + reg = <0x01c13000 0x0400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <26>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + allwinner,sram = <&otg_sram 1>; + status = "disabled"; + }; + + usbphy: phy@1c13400 { + compatible = "allwinner,suniv-f1c100s-usb-phy"; + reg = <0x01c13400 0x10>; + reg-names = "phy_ctrl"; + clocks = <&ccu CLK_USB_PHY0>; + clock-names = "usb0_phy"; + resets = <&ccu RST_USB_PHY0>; + reset-names = "usb0_reset"; + #phy-cells = <1>; + status = "disabled"; + }; + ccu: clock@1c20000 { compatible = "allwinner,suniv-f1c100s-ccu"; reg = <0x01c20000 0x400>; -- 2.35.7 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-03-19 21:29 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-03-19 21:29 [PATCH v6 0/6] ARM: suniv: USB and two new boards support Andre Przywara 2023-03-19 21:29 ` Andre Przywara 2023-03-19 21:29 ` Andre Przywara [this message] 2023-03-19 21:29 ` [PATCH v6 1/6] ARM: dts: suniv: add USB-related device nodes Andre Przywara 2023-03-19 21:29 ` [PATCH v6 2/6] ARM: dts: suniv: licheepi-nano: enable USB Andre Przywara 2023-03-19 21:29 ` Andre Przywara 2023-03-19 21:29 ` [PATCH v6 3/6] dt-bindings: vendor-prefixes: add Source Parts and Lctech names Andre Przywara 2023-03-19 21:29 ` Andre Przywara 2023-03-19 21:29 ` [PATCH v6 4/6] dt-binding: arm: sunxi: add two board compatible strings Andre Przywara 2023-03-19 21:29 ` Andre Przywara 2023-03-19 21:29 ` [PATCH v6 5/6] ARM: dts: suniv: add device tree for PopStick v1.1 Andre Przywara 2023-03-19 21:29 ` Andre Przywara 2023-03-23 19:17 ` Jernej Škrabec 2023-03-23 19:17 ` Jernej Škrabec 2023-03-19 21:29 ` [PATCH v6 6/6] ARM: dts: suniv: Add Lctech Pi F1C200s devicetree Andre Przywara 2023-03-19 21:29 ` Andre Przywara 2023-03-23 21:00 ` [PATCH v6 0/6] ARM: suniv: USB and two new boards support Jernej Škrabec 2023-03-23 21:00 ` Jernej Škrabec
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230319212936.26649-2-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=devicetree@vger.kernel.org \ --cc=jernej.skrabec@gmail.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-sunxi@lists.linux.dev \ --cc=robh+dt@kernel.org \ --cc=samuel@sholland.org \ --cc=uwu@icenowy.me \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.