From: Christian Hewitt <christianshewitt@gmail.com>
To: u-boot@lists.denx.de, u-boot-amlogic@groups.io,
linux-amlogic@lists.infradead.org
Subject: [PATCH 10/13] doc: boards: amlogic: add documentation for Radxa Zero2
Date: Thu, 23 Mar 2023 06:54:55 +0000 [thread overview]
Message-ID: <20230323065458.776029-11-christianshewitt@gmail.com> (raw)
In-Reply-To: <20230323065458.776029-1-christianshewitt@gmail.com>
Add build docs for the Radxa Zero2 board.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
board/amlogic/w400/MAINTAINERS | 2 +
doc/board/amlogic/index.rst | 1 +
doc/board/amlogic/radxa-zero2.rst | 79 +++++++++++++++++++++++++++++++
3 files changed, 82 insertions(+)
create mode 100644 doc/board/amlogic/radxa-zero2.rst
diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
index 042b523056..117f79ea04 100644
--- a/board/amlogic/w400/MAINTAINERS
+++ b/board/amlogic/w400/MAINTAINERS
@@ -5,6 +5,8 @@ L: u-boot-amlogic@groups.io
F: board/amlogic/w400/
F: configs/bananapi-cm4-cm4io_defconfig
F: configs/bananapi-m2s_defconfig
+F: configs/radxa-zero2_defconfig
F: doc/board/amlogic/w400.rst
F: doc/board/amlogic/bananapi-cm4io.rst
F: doc/board/amlogic/bananapi-m2s.rst
+F: doc/board/amlogic/radxa-zero2.rst
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index fa1b362731..71b7e1f3ed 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -112,6 +112,7 @@ Board Documentation
p212
q200
radxa-zero
+ radxa-zero2
sei510
sei610
s400
diff --git a/doc/board/amlogic/radxa-zero2.rst b/doc/board/amlogic/radxa-zero2.rst
new file mode 100644
index 0000000000..3fb5d360e8
--- /dev/null
+++ b/doc/board/amlogic/radxa-zero2.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Radxa Zero2 (A311D)
+==============================
+
+Radxa Zero2 is a small form factor SBC based on the Amlogic A311D chipset with the
+following specification:
+
+- Amlogic A311D (Quad A73 + Dual A53) CPU
+- 4GB LPDDR4 RAM
+- 32/64/128GB eMMC
+- Mali G52-MP4 GPU
+- HDMI 2.1 output (micro)
+- BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0
+- 1x USB 2.0 port - Type C (OTG)
+- 1x USB 3.0 port - Type C (Host)
+- 1x micro SD Card slot
+- 40 Pin GPIO header
+
+Schematics are available on request from Radxa.
+
+U-Boot Compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make radxa-zero2_defconfig
+ $ make
+
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh radxa-zero2 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
+
+.. code-block:: bash
+
+ $ git clone -b radxa-zero-v2021.07 https://github.com/radxa/u-boot.git
+ $ git clone https://github.com/radxa/fip.git
+
+ $ sudo apt-get install -y gcc-aarch64-linux-gnu device-tree-compiler libncurses5 libncurses5-dev
+ $ sudo apt-get install -y bc python dosfstools flex build-essential libssl-dev mtools
+
+ $ wget https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz
+ $ sudo tar xvf gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz -C /opt
+
+ $ export CROSS_COMPILE=/opt/gcc-arm-10.2-2020.11-x86_64-aarch64-none-elf/bin/aarch64-none-elf-
+ $ export ARCH=arm
+ $ cd u-boot
+ $ make radxa-zero2_defconfig
+ $ make
+
+ $ cp u-boot.bin ../fip/radxa-zero2/bl33.bin
+ $ cd ../fip/radxa-zero2
+ $ make
+
+This will generate the signed U-Boot binaries:
+
+.. code-block:: bash
+
+ $ u-boot.bin u-boot.bin.sd.bin u-boot.bin.usb.bl2 u-boot.bin.usb.tpl
+
+Then write U-Boot to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: u-boot@lists.denx.de, u-boot-amlogic@groups.io,
linux-amlogic@lists.infradead.org
Cc: Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH 10/13] doc: boards: amlogic: add documentation for Radxa Zero2
Date: Thu, 23 Mar 2023 06:54:55 +0000 [thread overview]
Message-ID: <20230323065458.776029-11-christianshewitt@gmail.com> (raw)
In-Reply-To: <20230323065458.776029-1-christianshewitt@gmail.com>
Add build docs for the Radxa Zero2 board.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
board/amlogic/w400/MAINTAINERS | 2 +
doc/board/amlogic/index.rst | 1 +
doc/board/amlogic/radxa-zero2.rst | 79 +++++++++++++++++++++++++++++++
3 files changed, 82 insertions(+)
create mode 100644 doc/board/amlogic/radxa-zero2.rst
diff --git a/board/amlogic/w400/MAINTAINERS b/board/amlogic/w400/MAINTAINERS
index 042b523056..117f79ea04 100644
--- a/board/amlogic/w400/MAINTAINERS
+++ b/board/amlogic/w400/MAINTAINERS
@@ -5,6 +5,8 @@ L: u-boot-amlogic@groups.io
F: board/amlogic/w400/
F: configs/bananapi-cm4-cm4io_defconfig
F: configs/bananapi-m2s_defconfig
+F: configs/radxa-zero2_defconfig
F: doc/board/amlogic/w400.rst
F: doc/board/amlogic/bananapi-cm4io.rst
F: doc/board/amlogic/bananapi-m2s.rst
+F: doc/board/amlogic/radxa-zero2.rst
diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst
index fa1b362731..71b7e1f3ed 100644
--- a/doc/board/amlogic/index.rst
+++ b/doc/board/amlogic/index.rst
@@ -112,6 +112,7 @@ Board Documentation
p212
q200
radxa-zero
+ radxa-zero2
sei510
sei610
s400
diff --git a/doc/board/amlogic/radxa-zero2.rst b/doc/board/amlogic/radxa-zero2.rst
new file mode 100644
index 0000000000..3fb5d360e8
--- /dev/null
+++ b/doc/board/amlogic/radxa-zero2.rst
@@ -0,0 +1,79 @@
+.. SPDX-License-Identifier: GPL-2.0+
+
+U-Boot for Radxa Zero2 (A311D)
+==============================
+
+Radxa Zero2 is a small form factor SBC based on the Amlogic A311D chipset with the
+following specification:
+
+- Amlogic A311D (Quad A73 + Dual A53) CPU
+- 4GB LPDDR4 RAM
+- 32/64/128GB eMMC
+- Mali G52-MP4 GPU
+- HDMI 2.1 output (micro)
+- BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0
+- 1x USB 2.0 port - Type C (OTG)
+- 1x USB 3.0 port - Type C (Host)
+- 1x micro SD Card slot
+- 40 Pin GPIO header
+
+Schematics are available on request from Radxa.
+
+U-Boot Compilation
+------------------
+
+.. code-block:: bash
+
+ $ export CROSS_COMPILE=aarch64-none-elf-
+ $ make radxa-zero2_defconfig
+ $ make
+
+U-Boot Signing with Pre-Built FIP repo
+--------------------------------------
+
+.. code-block:: bash
+ $ git clone https://github.com/LibreELEC/amlogic-boot-fip --depth=1
+ $ cd amlogic-boot-fip
+ $ mkdir my-output-dir
+ $ ./build-fip.sh radxa-zero2 /path/to/u-boot/u-boot.bin my-output-dir
+
+U-Boot Manual Signing
+---------------------
+
+Amlogic does not provide sources for the firmware and tools needed to create a bootloader
+image so it is necessary to obtain binaries from sources published by the board vendor:
+
+.. code-block:: bash
+
+ $ git clone -b radxa-zero-v2021.07 https://github.com/radxa/u-boot.git
+ $ git clone https://github.com/radxa/fip.git
+
+ $ sudo apt-get install -y gcc-aarch64-linux-gnu device-tree-compiler libncurses5 libncurses5-dev
+ $ sudo apt-get install -y bc python dosfstools flex build-essential libssl-dev mtools
+
+ $ wget https://developer.arm.com/-/media/Files/downloads/gnu-a/10.3-2021.07/binrel/gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz
+ $ sudo tar xvf gcc-arm-10.3-2021.07-x86_64-aarch64-none-elf.tar.xz -C /opt
+
+ $ export CROSS_COMPILE=/opt/gcc-arm-10.2-2020.11-x86_64-aarch64-none-elf/bin/aarch64-none-elf-
+ $ export ARCH=arm
+ $ cd u-boot
+ $ make radxa-zero2_defconfig
+ $ make
+
+ $ cp u-boot.bin ../fip/radxa-zero2/bl33.bin
+ $ cd ../fip/radxa-zero2
+ $ make
+
+This will generate the signed U-Boot binaries:
+
+.. code-block:: bash
+
+ $ u-boot.bin u-boot.bin.sd.bin u-boot.bin.usb.bl2 u-boot.bin.usb.tpl
+
+Then write U-Boot to SD or eMMC with:
+
+.. code-block:: bash
+
+ $ DEV=/dev/boot_device
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
+ $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=440
--
2.34.1
next prev parent reply other threads:[~2023-03-23 6:55 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-23 6:54 [PATCH 00/13] boards: amlogic: add BananaPi/Radxa/WeTek boards Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 6:54 ` [PATCH 01/13] docs: boards: amlogic: add bananapi-m5 to u200 maintainer file Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 8:48 ` Neil Armstrong
2023-03-23 8:48 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 02/13] ARM: dts: add support for BananaPi M2-Pro Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 03/13] boards: add BananaPi M2-Pro defconfig Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 04/13] docs: boards: amlogic: add documentation for BananaPi M2-Pro Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 05/13] ARM: dts: add support for BananaPi M2S Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 8:50 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 06/13] boards: add BananaPi M2S defconfig Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 07/13] docs: boards: amlogic: add documentation for BananaPi M2S Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 6:54 ` [PATCH 08/13] ARM: dts: add support for Radxa Zero2 Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 09/13] boards: amlogic: add Radxa Zero2 defconfig Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 6:54 ` Christian Hewitt [this message]
2023-03-23 6:54 ` [PATCH 10/13] doc: boards: amlogic: add documentation for Radxa Zero2 Christian Hewitt
2023-03-23 6:54 ` [PATCH 11/13] ARM: dts: add support for WeTek Hub and WeTek Play2 Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 8:51 ` Neil Armstrong
2023-03-23 6:54 ` [PATCH 12/13] boards: amlogic: add WeTek Hub and WeTek Play2 defconfig Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
2023-03-23 6:54 ` [PATCH 13/13] doc: boards: amlogic: add documentation for WeTek Hub and WeTek Play2 Christian Hewitt
2023-03-23 6:54 ` Christian Hewitt
[not found] ` <174EF9F0421CB2CD.22739@groups.io>
2023-03-23 7:04 ` [PATCH 12/13] boards: amlogic: add WeTek Hub and WeTek Play2 defconfig Christian Hewitt
2023-03-23 7:04 ` Christian Hewitt
2023-03-23 7:04 ` Christian Hewitt
2023-03-23 8:52 ` Neil Armstrong
2023-03-23 8:52 ` Neil Armstrong
2023-03-23 8:52 ` Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230323065458.776029-11-christianshewitt@gmail.com \
--to=christianshewitt@gmail.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=u-boot-amlogic@groups.io \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.