From: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>,
Venkateswara Naralasetty <quic_vnaralas@quicinc.com>,
Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Subject: [PATCH] wifi: ath11k: skip status ring entry processing
Date: Tue, 28 Mar 2023 12:48:14 +0530 [thread overview]
Message-ID: <20230328071814.13018-1-quic_tamizhr@quicinc.com> (raw)
From: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
If STATUS_BUFFER_DONE is not set for a monitor status ring entry,
we don't process the status ring until STATUS_BUFFER_DONE set
for that status ring entry.
During LMAC reset it may happen that hardware will not write
STATUS_BUFFER_DONE tlv in status buffer, in that case we end up
waiting for STATUS_BUFFER_DONE leading to backpressure on monitor
status ring.
To fix the issue, when HP(Head Pointer) + 1 entry is peeked and if DMA
is not done and if HP + 2 entry's DMA done is set,
replenish HP + 1 entry and start processing in next interrupt.
If HP + 2 entry's DMA done is not set, poll onto HP + 1 entry DMA
done to be set.
Also, during monitor attach HP points to the end of the ring and
TP(Tail Pointer) points to the start of the ring.
Using ath11k_hal_srng_src_peek() may result in processing invalid buffer
for the very first interrupt. Since, HW starts writing buffer from TP.
To avoid this issue call ath11k_hal_srng_src_next_peek() instead of
calling ath11k_hal_srng_src_peek().
Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
---
drivers/net/wireless/ath/ath11k/dp_rx.c | 91 +++++++++++++++++++++----
drivers/net/wireless/ath/ath11k/hal.c | 14 ++++
drivers/net/wireless/ath/ath11k/hal.h | 2 +
3 files changed, 94 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index 99859b59138e..b0eac59162a9 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -2960,6 +2960,46 @@ ath11k_dp_rx_mon_update_status_buf_state(struct ath11k_mon_data *pmon,
}
}
+enum dp_mon_status_buf_state
+ath11k_dp_rx_mon_handle_status_buf_done(struct ath11k_base *ab, struct hal_srng *srng,
+ struct dp_rxdma_ring *rx_ring)
+{
+ void *status_desc;
+ struct sk_buff *skb;
+ struct ath11k_skb_rxcb *rxcb;
+ struct hal_tlv_hdr *tlv;
+ dma_addr_t paddr;
+ u32 cookie;
+ int buf_id;
+ u8 rbm;
+
+ status_desc = ath11k_hal_srng_src_next_peek(ab, srng);
+ if (!status_desc)
+ return DP_MON_STATUS_NO_DMA;
+
+ ath11k_hal_rx_buf_addr_info_get(status_desc, &paddr, &cookie, &rbm);
+
+ buf_id = FIELD_GET(DP_RXDMA_BUF_COOKIE_BUF_ID, cookie);
+
+ spin_lock_bh(&rx_ring->idr_lock);
+ skb = idr_find(&rx_ring->bufs_idr, buf_id);
+ spin_unlock_bh(&rx_ring->idr_lock);
+
+ if (!skb)
+ return DP_MON_STATUS_NO_DMA;
+
+ rxcb = ATH11K_SKB_RXCB(skb);
+ dma_sync_single_for_cpu(ab->dev, rxcb->paddr,
+ skb->len + skb_tailroom(skb),
+ DMA_FROM_DEVICE);
+
+ tlv = (struct hal_tlv_hdr *)skb->data;
+ if (FIELD_GET(HAL_TLV_HDR_TAG, tlv->tl) != HAL_RX_STATUS_BUFFER_DONE)
+ return DP_MON_STATUS_NO_DMA;
+
+ return DP_MON_STATUS_REPLINISH;
+}
+
static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
int *budget, struct sk_buff_head *skb_list)
{
@@ -2973,6 +3013,7 @@ static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
struct sk_buff *skb;
struct ath11k_skb_rxcb *rxcb;
struct hal_tlv_hdr *tlv;
+ enum dp_mon_status_buf_state reap_status;
u32 cookie;
int buf_id, srng_id;
dma_addr_t paddr;
@@ -2992,8 +3033,7 @@ static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
ath11k_hal_srng_access_begin(ab, srng);
while (*budget) {
*budget -= 1;
- rx_mon_status_desc =
- ath11k_hal_srng_src_peek(ab, srng);
+ rx_mon_status_desc = ath11k_hal_srng_src_peek(ab, srng);
if (!rx_mon_status_desc) {
pmon->buf_state = DP_MON_STATUS_REPLINISH;
break;
@@ -3024,18 +3064,43 @@ static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
tlv = (struct hal_tlv_hdr *)skb->data;
if (FIELD_GET(HAL_TLV_HDR_TAG, tlv->tl) !=
HAL_RX_STATUS_BUFFER_DONE) {
- ath11k_warn(ab, "mon status DONE not set %lx, buf_id %d\n",
- FIELD_GET(HAL_TLV_HDR_TAG,
- tlv->tl), buf_id);
- /* If done status is missing, hold onto status
- * ring until status is done for this status
- * ring buffer.
- * Keep HP in mon_status_ring unchanged,
- * and break from here.
- * Check status for same buffer for next time
+ /* RxDMA status done bit might not be set even
+ * though tp is moved by HW.
*/
- pmon->buf_state = DP_MON_STATUS_NO_DMA;
- break;
+
+ /* If done status is missing:
+ * 1. As per MAC team's suggestion,
+ * when HP + 1 entry is peeked and if DMA
+ * is not done and if HP + 2 entry's DMA done
+ * is set. skip HP + 1 entry and
+ * start processing in next interrupt.
+ * 2. If HP + 2 entry's DMA done is not set,
+ * poll onto HP + 1 entry DMA done to be set.
+ * Check status for same buffer for next time
+ * dp_rx_mon_status_srng_process
+ */
+
+ reap_status = ath11k_dp_rx_mon_handle_status_buf_done(ab, srng,
+ rx_ring);
+ if (reap_status == DP_MON_STATUS_NO_DMA) {
+ continue;
+ } else if (reap_status == DP_MON_STATUS_REPLINISH) {
+ ath11k_warn(ab, "mon status DONE not set %lx, buf_id %d\n",
+ FIELD_GET(HAL_TLV_HDR_TAG, tlv->tl),
+ buf_id);
+
+ spin_lock_bh(&rx_ring->idr_lock);
+ idr_remove(&rx_ring->bufs_idr, buf_id);
+ spin_unlock_bh(&rx_ring->idr_lock);
+
+ dma_unmap_single(ab->dev, rxcb->paddr,
+ skb->len + skb_tailroom(skb),
+ DMA_FROM_DEVICE);
+
+ dev_kfree_skb_any(skb);
+ pmon->buf_state = DP_MON_STATUS_REPLINISH;
+ goto move_next;
+ }
}
spin_lock_bh(&rx_ring->idr_lock);
diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
index 22422237500c..31e499eaa795 100644
--- a/drivers/net/wireless/ath/ath11k/hal.c
+++ b/drivers/net/wireless/ath/ath11k/hal.c
@@ -783,6 +783,20 @@ u32 *ath11k_hal_srng_src_get_next_reaped(struct ath11k_base *ab,
return desc;
}
+u32 *ath11k_hal_srng_src_next_peek(struct ath11k_base *ab, struct hal_srng *srng)
+{
+ u32 next_hp;
+
+ lockdep_assert_held(&srng->lock);
+
+ next_hp = (srng->u.src_ring.hp + srng->entry_size) % srng->ring_size;
+
+ if (next_hp != srng->u.src_ring.cached_tp)
+ return srng->ring_base_vaddr + next_hp;
+
+ return NULL;
+}
+
u32 *ath11k_hal_srng_src_peek(struct ath11k_base *ab, struct hal_srng *srng)
{
lockdep_assert_held(&srng->lock);
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index 1942d41d6de5..f60a896a5fb8 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -946,6 +946,8 @@ u32 *ath11k_hal_srng_dst_peek(struct ath11k_base *ab, struct hal_srng *srng);
int ath11k_hal_srng_dst_num_free(struct ath11k_base *ab, struct hal_srng *srng,
bool sync_hw_ptr);
u32 *ath11k_hal_srng_src_peek(struct ath11k_base *ab, struct hal_srng *srng);
+u32 *ath11k_hal_srng_src_next_peek(struct ath11k_base *ab,
+ struct hal_srng *srng);
u32 *ath11k_hal_srng_src_get_next_reaped(struct ath11k_base *ab,
struct hal_srng *srng);
u32 *ath11k_hal_srng_src_reap_next(struct ath11k_base *ab,
base-commit: bea046575a2e6d7d1cf63cc7ab032647a3585de5
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
To: <ath11k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>,
Venkateswara Naralasetty <quic_vnaralas@quicinc.com>,
Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Subject: [PATCH] wifi: ath11k: skip status ring entry processing
Date: Tue, 28 Mar 2023 12:48:14 +0530 [thread overview]
Message-ID: <20230328071814.13018-1-quic_tamizhr@quicinc.com> (raw)
From: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
If STATUS_BUFFER_DONE is not set for a monitor status ring entry,
we don't process the status ring until STATUS_BUFFER_DONE set
for that status ring entry.
During LMAC reset it may happen that hardware will not write
STATUS_BUFFER_DONE tlv in status buffer, in that case we end up
waiting for STATUS_BUFFER_DONE leading to backpressure on monitor
status ring.
To fix the issue, when HP(Head Pointer) + 1 entry is peeked and if DMA
is not done and if HP + 2 entry's DMA done is set,
replenish HP + 1 entry and start processing in next interrupt.
If HP + 2 entry's DMA done is not set, poll onto HP + 1 entry DMA
done to be set.
Also, during monitor attach HP points to the end of the ring and
TP(Tail Pointer) points to the start of the ring.
Using ath11k_hal_srng_src_peek() may result in processing invalid buffer
for the very first interrupt. Since, HW starts writing buffer from TP.
To avoid this issue call ath11k_hal_srng_src_next_peek() instead of
calling ath11k_hal_srng_src_peek().
Tested-on: IPQ5018 hw1.0 AHB WLAN.HK.2.6.0.1-00861-QCAHKSWPL_SILICONZ-1
Signed-off-by: Venkateswara Naralasetty <quic_vnaralas@quicinc.com>
Co-developed-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
---
drivers/net/wireless/ath/ath11k/dp_rx.c | 91 +++++++++++++++++++++----
drivers/net/wireless/ath/ath11k/hal.c | 14 ++++
drivers/net/wireless/ath/ath11k/hal.h | 2 +
3 files changed, 94 insertions(+), 13 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index 99859b59138e..b0eac59162a9 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -2960,6 +2960,46 @@ ath11k_dp_rx_mon_update_status_buf_state(struct ath11k_mon_data *pmon,
}
}
+enum dp_mon_status_buf_state
+ath11k_dp_rx_mon_handle_status_buf_done(struct ath11k_base *ab, struct hal_srng *srng,
+ struct dp_rxdma_ring *rx_ring)
+{
+ void *status_desc;
+ struct sk_buff *skb;
+ struct ath11k_skb_rxcb *rxcb;
+ struct hal_tlv_hdr *tlv;
+ dma_addr_t paddr;
+ u32 cookie;
+ int buf_id;
+ u8 rbm;
+
+ status_desc = ath11k_hal_srng_src_next_peek(ab, srng);
+ if (!status_desc)
+ return DP_MON_STATUS_NO_DMA;
+
+ ath11k_hal_rx_buf_addr_info_get(status_desc, &paddr, &cookie, &rbm);
+
+ buf_id = FIELD_GET(DP_RXDMA_BUF_COOKIE_BUF_ID, cookie);
+
+ spin_lock_bh(&rx_ring->idr_lock);
+ skb = idr_find(&rx_ring->bufs_idr, buf_id);
+ spin_unlock_bh(&rx_ring->idr_lock);
+
+ if (!skb)
+ return DP_MON_STATUS_NO_DMA;
+
+ rxcb = ATH11K_SKB_RXCB(skb);
+ dma_sync_single_for_cpu(ab->dev, rxcb->paddr,
+ skb->len + skb_tailroom(skb),
+ DMA_FROM_DEVICE);
+
+ tlv = (struct hal_tlv_hdr *)skb->data;
+ if (FIELD_GET(HAL_TLV_HDR_TAG, tlv->tl) != HAL_RX_STATUS_BUFFER_DONE)
+ return DP_MON_STATUS_NO_DMA;
+
+ return DP_MON_STATUS_REPLINISH;
+}
+
static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
int *budget, struct sk_buff_head *skb_list)
{
@@ -2973,6 +3013,7 @@ static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
struct sk_buff *skb;
struct ath11k_skb_rxcb *rxcb;
struct hal_tlv_hdr *tlv;
+ enum dp_mon_status_buf_state reap_status;
u32 cookie;
int buf_id, srng_id;
dma_addr_t paddr;
@@ -2992,8 +3033,7 @@ static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
ath11k_hal_srng_access_begin(ab, srng);
while (*budget) {
*budget -= 1;
- rx_mon_status_desc =
- ath11k_hal_srng_src_peek(ab, srng);
+ rx_mon_status_desc = ath11k_hal_srng_src_peek(ab, srng);
if (!rx_mon_status_desc) {
pmon->buf_state = DP_MON_STATUS_REPLINISH;
break;
@@ -3024,18 +3064,43 @@ static int ath11k_dp_rx_reap_mon_status_ring(struct ath11k_base *ab, int mac_id,
tlv = (struct hal_tlv_hdr *)skb->data;
if (FIELD_GET(HAL_TLV_HDR_TAG, tlv->tl) !=
HAL_RX_STATUS_BUFFER_DONE) {
- ath11k_warn(ab, "mon status DONE not set %lx, buf_id %d\n",
- FIELD_GET(HAL_TLV_HDR_TAG,
- tlv->tl), buf_id);
- /* If done status is missing, hold onto status
- * ring until status is done for this status
- * ring buffer.
- * Keep HP in mon_status_ring unchanged,
- * and break from here.
- * Check status for same buffer for next time
+ /* RxDMA status done bit might not be set even
+ * though tp is moved by HW.
*/
- pmon->buf_state = DP_MON_STATUS_NO_DMA;
- break;
+
+ /* If done status is missing:
+ * 1. As per MAC team's suggestion,
+ * when HP + 1 entry is peeked and if DMA
+ * is not done and if HP + 2 entry's DMA done
+ * is set. skip HP + 1 entry and
+ * start processing in next interrupt.
+ * 2. If HP + 2 entry's DMA done is not set,
+ * poll onto HP + 1 entry DMA done to be set.
+ * Check status for same buffer for next time
+ * dp_rx_mon_status_srng_process
+ */
+
+ reap_status = ath11k_dp_rx_mon_handle_status_buf_done(ab, srng,
+ rx_ring);
+ if (reap_status == DP_MON_STATUS_NO_DMA) {
+ continue;
+ } else if (reap_status == DP_MON_STATUS_REPLINISH) {
+ ath11k_warn(ab, "mon status DONE not set %lx, buf_id %d\n",
+ FIELD_GET(HAL_TLV_HDR_TAG, tlv->tl),
+ buf_id);
+
+ spin_lock_bh(&rx_ring->idr_lock);
+ idr_remove(&rx_ring->bufs_idr, buf_id);
+ spin_unlock_bh(&rx_ring->idr_lock);
+
+ dma_unmap_single(ab->dev, rxcb->paddr,
+ skb->len + skb_tailroom(skb),
+ DMA_FROM_DEVICE);
+
+ dev_kfree_skb_any(skb);
+ pmon->buf_state = DP_MON_STATUS_REPLINISH;
+ goto move_next;
+ }
}
spin_lock_bh(&rx_ring->idr_lock);
diff --git a/drivers/net/wireless/ath/ath11k/hal.c b/drivers/net/wireless/ath/ath11k/hal.c
index 22422237500c..31e499eaa795 100644
--- a/drivers/net/wireless/ath/ath11k/hal.c
+++ b/drivers/net/wireless/ath/ath11k/hal.c
@@ -783,6 +783,20 @@ u32 *ath11k_hal_srng_src_get_next_reaped(struct ath11k_base *ab,
return desc;
}
+u32 *ath11k_hal_srng_src_next_peek(struct ath11k_base *ab, struct hal_srng *srng)
+{
+ u32 next_hp;
+
+ lockdep_assert_held(&srng->lock);
+
+ next_hp = (srng->u.src_ring.hp + srng->entry_size) % srng->ring_size;
+
+ if (next_hp != srng->u.src_ring.cached_tp)
+ return srng->ring_base_vaddr + next_hp;
+
+ return NULL;
+}
+
u32 *ath11k_hal_srng_src_peek(struct ath11k_base *ab, struct hal_srng *srng)
{
lockdep_assert_held(&srng->lock);
diff --git a/drivers/net/wireless/ath/ath11k/hal.h b/drivers/net/wireless/ath/ath11k/hal.h
index 1942d41d6de5..f60a896a5fb8 100644
--- a/drivers/net/wireless/ath/ath11k/hal.h
+++ b/drivers/net/wireless/ath/ath11k/hal.h
@@ -946,6 +946,8 @@ u32 *ath11k_hal_srng_dst_peek(struct ath11k_base *ab, struct hal_srng *srng);
int ath11k_hal_srng_dst_num_free(struct ath11k_base *ab, struct hal_srng *srng,
bool sync_hw_ptr);
u32 *ath11k_hal_srng_src_peek(struct ath11k_base *ab, struct hal_srng *srng);
+u32 *ath11k_hal_srng_src_next_peek(struct ath11k_base *ab,
+ struct hal_srng *srng);
u32 *ath11k_hal_srng_src_get_next_reaped(struct ath11k_base *ab,
struct hal_srng *srng);
u32 *ath11k_hal_srng_src_reap_next(struct ath11k_base *ab,
base-commit: bea046575a2e6d7d1cf63cc7ab032647a3585de5
--
2.17.1
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next reply other threads:[~2023-03-28 7:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-03-28 7:18 Tamizh Chelvam Raja [this message]
2023-03-28 7:18 ` [PATCH] wifi: ath11k: skip status ring entry processing Tamizh Chelvam Raja
2023-03-28 9:21 ` kernel test robot
2023-03-28 9:21 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230328071814.13018-1-quic_tamizhr@quicinc.com \
--to=quic_tamizhr@quicinc.com \
--cc=ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=quic_vnaralas@quicinc.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.