All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
To: linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org,
	Reinette Chatre <reinette.chatre@intel.com>,
	Fenghua Yu <fenghua.yu@intel.com>, Shuah Khan <shuah@kernel.org>
Cc: "Shaopeng Tan" <tan.shaopeng@jp.fujitsu.com>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Subject: [PATCH 22/22] selftests/resctrl: Rewrite Cache Allocation Technology (CAT) test
Date: Wed, 12 Apr 2023 16:21:22 +0300	[thread overview]
Message-ID: <20230412132122.29452-23-ilpo.jarvinen@linux.intel.com> (raw)
In-Reply-To: <20230412132122.29452-1-ilpo.jarvinen@linux.intel.com>

CAT test spawns two processes into two different control groups with
exclusive schemata. Both the processes alloc a buffer from memory
matching their allocated LLC block size and flush the entire buffer out
of caches. Since the processes are reading through the buffer only once
during the measurement and initially all the buffer was flushed, the
test isn't testing CAT.

Rewrite the CAT test to allocated a buffer sized to half of LLC. Then
perform a sequence of tests with different LLC block sizes starting
from 1-bit CBM to half of the CBM bits. Flush the buffer before each
test and read the buffer twice. Observe the LLC misses on the second
read through the buffer. As the allocated LLC block gets larger and
larger, the LLC misses will become smaller and smaller giving a strong
signal on CAT working properly.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
---
 tools/testing/selftests/resctrl/cache.c    |  20 ++-
 tools/testing/selftests/resctrl/cat_test.c | 197 +++++++++------------
 2 files changed, 97 insertions(+), 120 deletions(-)

diff --git a/tools/testing/selftests/resctrl/cache.c b/tools/testing/selftests/resctrl/cache.c
index becca3ce4f9e..1bb9424f68c3 100644
--- a/tools/testing/selftests/resctrl/cache.c
+++ b/tools/testing/selftests/resctrl/cache.c
@@ -224,10 +224,10 @@ int measure_llc_resctrl(struct resctrl_val_param *param, int bm_pid)
  */
 int cat_val(struct resctrl_val_param *param)
 {
-	int memflush = 1, operation = 0, ret = 0;
 	char *resctrl_val = param->resctrl_val;
 	unsigned long llc_perf_miss = 0;
 	pid_t bm_pid;
+	int ret;
 
 	if (strcmp(param->filename, "") == 0)
 		sprintf(param->filename, "stdio");
@@ -245,6 +245,10 @@ int cat_val(struct resctrl_val_param *param)
 	if (ret)
 		return ret;
 
+	ret = alloc_buffer(param->span, 1);
+	if (ret)
+		return ret;
+
 	initialize_llc_perf();
 
 	/* Test runs until the callback setup() tells the test to stop. */
@@ -256,17 +260,15 @@ int cat_val(struct resctrl_val_param *param)
 		}
 		if (ret < 0)
 			break;
+
+		flush_buffer(param->span);
+		use_buffer(param->span, 0, true);
+
 		ret = reset_enable_llc_perf(bm_pid, param->cpu_no);
 		if (ret)
 			break;
 
-		if (run_fill_buf(param->span, memflush, operation, true)) {
-			fprintf(stderr, "Error-running fill buffer\n");
-			ret = -1;
-			break;
-		}
-
-		sleep(1);
+		use_buffer(param->span, 0, true);
 
 		/* Measure cache miss from perf */
 		ret = get_llc_perf(&llc_perf_miss);
@@ -279,6 +281,8 @@ int cat_val(struct resctrl_val_param *param)
 			break;
 	}
 
+	free_buffer();
+
 	return ret;
 }
 
diff --git a/tools/testing/selftests/resctrl/cat_test.c b/tools/testing/selftests/resctrl/cat_test.c
index d2b7369ad00e..e7d38152edbf 100644
--- a/tools/testing/selftests/resctrl/cat_test.c
+++ b/tools/testing/selftests/resctrl/cat_test.c
@@ -11,11 +11,12 @@
 #include "resctrl.h"
 #include <unistd.h>
 
-#define RESULT_FILE_NAME1	"result_cat1"
-#define RESULT_FILE_NAME2	"result_cat2"
-#define NUM_OF_RUNS		5
-#define MAX_DIFF_PERCENT	4
-#define MAX_DIFF		1000000
+#define RESULT_FILE_NAME		"result_cat1"
+#define NUM_OF_RUNS			5
+#define MIN_DIFF_PERCENT_PER_BIT	2
+
+static unsigned long current_mask;
+static long prev_avg_llc_val;
 
 /*
  * Change schemata. Write schemata to specified
@@ -28,48 +29,67 @@ static int cat_setup(struct resctrl_val_param *p)
 	int ret = 0;
 
 	/* Run NUM_OF_RUNS times */
-	if (p->num_of_runs >= NUM_OF_RUNS)
-		return END_OF_TESTS;
+	if (p->num_of_runs >= NUM_OF_RUNS) {
+		/* Remove one bit from the consecutive block */
+		current_mask &= current_mask >> 1;
+		if (!current_mask)
+			return END_OF_TESTS;
+
+		p->num_of_runs = 0;
+	}
 
 	if (p->num_of_runs == 0) {
-		sprintf(schemata, "%lx", p->mask);
-		ret = write_schemata(p->ctrlgrp, schemata, p->cpu_no,
-				     p->resctrl_val);
+		snprintf(schemata, sizeof(schemata), "%lx", p->mask & ~current_mask);
+		ret = write_schemata("", schemata, p->cpu_no, p->resctrl_val);
+		if (ret)
+			return ret;
+		snprintf(schemata, sizeof(schemata), "%lx", current_mask);
+		ret = write_schemata(p->ctrlgrp, schemata, p->cpu_no, p->resctrl_val);
+		if (ret)
+			return ret;
 	}
 	p->num_of_runs++;
 
 	return ret;
 }
 
+
 static int show_results_info(unsigned long sum_llc_val, int no_of_bits,
-			     unsigned long cache_span, unsigned long max_diff,
-			     unsigned long max_diff_percent, unsigned long num_of_runs,
-			     bool platform)
+			     unsigned long cache_span, long min_diff_percent,
+			     unsigned long num_of_runs, bool platform)
 {
-	unsigned long avg_llc_val = 0;
-	float diff_percent;
-	int ret;
+	long avg_llc_val = 0;
+	int avg_diff_per;
+	float avg_diff;
+	int ret = 0;
 
 	avg_llc_val = sum_llc_val / num_of_runs;
-	diff_percent = ((float)cache_span - avg_llc_val) / cache_span * 100;
+	avg_diff = (float)(avg_llc_val - prev_avg_llc_val) / prev_avg_llc_val;
+	avg_diff_per = (int)(avg_diff * 100);
 
-	ret = platform && abs((int)diff_percent) > max_diff_percent;
+	if (prev_avg_llc_val) {
+		ret = platform && avg_diff_per < min_diff_percent;
 
-	ksft_print_msg("%s Check cache miss rate within %d%%\n",
-		       ret ? "Fail:" : "Pass:", max_diff_percent);
+		ksft_print_msg("%s Check cache miss rate changed more than %d%%\n",
+			       ret ? "Fail:" : "Pass:", min_diff_percent);
 
-	ksft_print_msg("Percent diff=%d\n", abs((int)diff_percent));
+		ksft_print_msg("Percent diff=%d\n", avg_diff_per);
+	}
+	prev_avg_llc_val = avg_llc_val;
 
 	show_cache_info(no_of_bits, avg_llc_val, cache_span, true);
 
 	return ret;
 }
 
-static int check_results(struct resctrl_val_param *param)
+static int check_results(struct resctrl_val_param *param, char *cache_type)
 {
 	char *token_array[8], temp[512];
 	unsigned long sum_llc_perf_miss = 0;
-	int runs = 0, no_of_bits = 0;
+	unsigned long alloc_size;
+	int runs = 0;
+	int fail = 0;
+	int ret;
 	FILE *fp;
 
 	ksft_print_msg("Checking for pass/fail\n");
@@ -83,43 +103,59 @@ static int check_results(struct resctrl_val_param *param)
 	while (fgets(temp, sizeof(temp), fp)) {
 		char *token = strtok(temp, ":\t");
 		int fields = 0;
+		int bits;
 
 		while (token) {
 			token_array[fields++] = token;
 			token = strtok(NULL, ":\t");
 		}
-		/*
-		 * Discard the first value which is inaccurate due to monitoring
-		 * setup transition phase.
-		 */
-		if (runs > 0)
-			sum_llc_perf_miss += strtoul(token_array[3], NULL, 0);
+
+		sum_llc_perf_miss += strtoul(token_array[3], NULL, 0);
 		runs++;
+
+		if (runs < NUM_OF_RUNS)
+			continue;
+
+		if (!current_mask) {
+			ksft_print_msg("Unexpected empty cache mask\n");
+			break;
+		}
+
+		ret = cache_alloc_size(param->cpu_no, cache_type, current_mask, &alloc_size);
+		if (ret)
+			return ret;
+
+		bits = count_bits(current_mask);
+
+		ret = show_results_info(sum_llc_perf_miss, bits,
+					alloc_size / 64,
+					MIN_DIFF_PERCENT_PER_BIT * bits, runs,
+					get_vendor() == ARCH_INTEL);
+		if (ret)
+			fail = 1;
+
+		runs = 0;
+		sum_llc_perf_miss = 0;
+		current_mask &= current_mask >> 1;
 	}
 
 	fclose(fp);
-	no_of_bits = count_consecutive_bits(param->mask, NULL);
 
-	return show_results_info(sum_llc_perf_miss, no_of_bits, param->span / 64,
-				 MAX_DIFF, MAX_DIFF_PERCENT, runs - 1,
-				 get_vendor() == ARCH_INTEL);
+	return fail;
 }
 
 void cat_test_cleanup(void)
 {
-	remove(RESULT_FILE_NAME1);
-	remove(RESULT_FILE_NAME2);
+	remove(RESULT_FILE_NAME);
 }
 
 int cat_perf_miss_val(int cpu_no, int n, char *cache_type)
 {
-	unsigned long l_mask, l_mask_1;
-	int ret, pipefd[2], sibling_cpu_no;
 	unsigned long cache_size;
 	unsigned long long_mask;
+	unsigned int start;
 	int count_of_bits;
-	char pipe_message;
-	pid_t bm_pid;
+	int ret;
 
 	cache_size = 0;
 
@@ -131,7 +167,7 @@ int cat_perf_miss_val(int cpu_no, int n, char *cache_type)
 	ret = get_mask_no_shareable(cache_type, &long_mask);
 	if (ret)
 		return ret;
-	count_of_bits = count_consecutive_bits(long_mask, NULL);
+	count_of_bits = count_consecutive_bits(long_mask, &start);
 
 	/* Get L3/L2 cache size */
 	ret = get_cache_size(cpu_no, cache_type, &cache_size);
@@ -148,55 +184,21 @@ int cat_perf_miss_val(int cpu_no, int n, char *cache_type)
 			       count_of_bits - 1);
 		return -1;
 	}
-
-	/* Get core id from same socket for running another thread */
-	sibling_cpu_no = get_core_sibling(cpu_no);
-	if (sibling_cpu_no < 0)
-		return -1;
+	current_mask = create_bit_mask(start, n);
 
 	struct resctrl_val_param param = {
 		.resctrl_val	= CAT_STR,
 		.cpu_no		= cpu_no,
 		.mum_resctrlfs	= false,
+		.ctrlgrp	= "c1",
 		.setup		= cat_setup,
+		.filename	= RESULT_FILE_NAME,
+		.num_of_runs	= 0,
 	};
-
-	l_mask = long_mask >> n;
-	l_mask_1 = ~l_mask & long_mask;
-
-	/* Set param values for parent thread which will be allocated bitmask
-	 * with (max_bits - n) bits
-	 */
-	ret = cache_alloc_size(cpu_no, cache_type, l_mask, &param.span);
+	param.mask = long_mask;
+	ret = cache_alloc_size(cpu_no, cache_type, current_mask, &param.span);
 	if (ret)
 		return ret;
-	strcpy(param.ctrlgrp, "c2");
-	strcpy(param.mongrp, "m2");
-	strcpy(param.filename, RESULT_FILE_NAME2);
-	param.mask = l_mask;
-	param.num_of_runs = 0;
-
-	if (pipe(pipefd)) {
-		perror("# Unable to create pipe");
-		return errno;
-	}
-
-	bm_pid = fork();
-
-	/* Set param values for child thread which will be allocated bitmask
-	 * with n bits
-	 */
-	if (bm_pid == 0) {
-		param.mask = l_mask_1;
-		strcpy(param.ctrlgrp, "c1");
-		strcpy(param.mongrp, "m1");
-		ret = cache_alloc_size(cpu_no, cache_type, l_mask_1, &param.span);
-		if (ret)
-			return ret;
-		strcpy(param.filename, RESULT_FILE_NAME1);
-		param.num_of_runs = 0;
-		param.cpu_no = sibling_cpu_no;
-	}
 
 	remove(param.filename);
 
@@ -204,42 +206,13 @@ int cat_perf_miss_val(int cpu_no, int n, char *cache_type)
 	if (ret)
 		return ret;
 
-	ret = check_results(&param);
+	current_mask = create_bit_mask(start, n);
+	ret = check_results(&param, cache_type);
 	if (ret)
 		return ret;
 
-	if (bm_pid == 0) {
-		/* Tell parent that child is ready */
-		close(pipefd[0]);
-		pipe_message = 1;
-		if (write(pipefd[1], &pipe_message, sizeof(pipe_message)) <
-		    sizeof(pipe_message)) {
-			close(pipefd[1]);
-			perror("# failed signaling parent process");
-			return errno;
-		}
-
-		close(pipefd[1]);
-		while (1)
-			;
-	} else {
-		/* Parent waits for child to be ready. */
-		close(pipefd[1]);
-		pipe_message = 0;
-		while (pipe_message != 1) {
-			if (read(pipefd[0], &pipe_message,
-				 sizeof(pipe_message)) < sizeof(pipe_message)) {
-				perror("# failed reading from child process");
-				break;
-			}
-		}
-		close(pipefd[0]);
-		kill(bm_pid, SIGKILL);
-	}
-
 	cat_test_cleanup();
-	if (bm_pid)
-		umount_resctrlfs();
+	umount_resctrlfs();
 
 	return 0;
 }
-- 
2.30.2


  parent reply	other threads:[~2023-04-12 13:25 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-12 13:21 [PATCH 00/22] selftests/resctrl: Fixes, cleanups, and rewritten CAT test Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 01/22] selftests/resctrl: Add resctrl.h into build deps Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 02/22] selftests/resctrl: Check also too low values for CBM bits Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 03/22] selftests/resctrl: Make span unsigned long everywhere Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 04/22] selftests/resctrl: Express span in bytes Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 05/22] selftests/resctrl: Remove duplicated preparation for span arg Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 06/22] selftests/resctrl: Don't use variable argument list for ->setup() Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 07/22] selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf() Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 08/22] selftests/resctrl: Split run_fill_buf() to alloc, work, and dealloc helpers Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 09/22] selftests/resctrl: Remove start_buf local variable from buffer alloc func Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 10/22] selftests/resctrl: Don't pass test name to fill_buf Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 11/22] selftests/resctrl: Add flush_buffer() " Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 12/22] selftests/resctrl: Remove test type checks from cat_val() Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 13/22] selftests/resctrl: Refactor get_cbm_mask() Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 14/22] selftests/resctrl: Create cache_alloc_size() helper Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 15/22] selftests/resctrl: Replace count_bits with count_consecutive_bits() Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 16/22] selftests/resctrl: Exclude shareable bits from schemata in CAT test Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 17/22] selftests/resctrl: Pass the real number of tests to show_cache_info() Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 18/22] selftests/resctrl: Move CAT/CMT test global vars to func they are used Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 19/22] selftests/resctrl: Read in less obvious order to defeat prefetch optimizations Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 20/22] selftests/resctrl: Split measure_cache_vals() function Ilpo Järvinen
2023-04-12 13:21 ` [PATCH 21/22] selftests/resctrl: Split show_cache_info() to test specific and generic parts Ilpo Järvinen
2023-04-12 13:21 ` Ilpo Järvinen [this message]
2023-04-13 10:12   ` [PATCH 22/22] selftests/resctrl: Rewrite Cache Allocation Technology (CAT) test Ilpo Järvinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230412132122.29452-23-ilpo.jarvinen@linux.intel.com \
    --to=ilpo.jarvinen@linux.intel.com \
    --cc=fenghua.yu@intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=reinette.chatre@intel.com \
    --cc=shuah@kernel.org \
    --cc=tan.shaopeng@jp.fujitsu.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.