All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mason Huo <mason.huo@starfivetech.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor@kernel.org>,
	"Paul Walmsley" <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: Shengyu Qu <wiagn233@outlook.com>, <linux-pm@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-riscv@lists.infradead.org>,
	Mason Huo <mason.huo@starfivetech.com>
Subject: [PATCH v2 3/3] riscv: dts: starfive: Add cpu scaling for JH7110 SoC
Date: Mon, 17 Apr 2023 14:39:42 +0800	[thread overview]
Message-ID: <20230417063942.3141-4-mason.huo@starfivetech.com> (raw)
In-Reply-To: <20230417063942.3141-1-mason.huo@starfivetech.com>

Add the operating-points-v2 to support cpu scaling on StarFive JH7110 SoC.
It supports up to 4 cpu frequency loads.

Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 17 ++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 33 +++++++++++++++++++
 2 files changed, 50 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index cca1c8040801..b25e6d68ce53 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -227,3 +227,20 @@ &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&U74_1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_4 {
+	cpu-supply = <&vdd_cpu>;
+};
+
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..7eef88d2cedb 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -53,6 +53,9 @@ U74_1: cpu@1 {
 			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc_zba_zbb";
 			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
 
 			cpu1_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -79,6 +82,9 @@ U74_2: cpu@2 {
 			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc_zba_zbb";
 			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
 
 			cpu2_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -105,6 +111,9 @@ U74_3: cpu@3 {
 			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc_zba_zbb";
 			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
 
 			cpu3_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -131,6 +140,9 @@ U74_4: cpu@4 {
 			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc_zba_zbb";
 			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
 
 			cpu4_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -164,6 +176,27 @@ core4 {
 		};
 	};
 
+	cpu_opp: opp-table-0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+			opp-375000000 {
+					opp-hz = /bits/ 64 <375000000>;
+					opp-microvolt = <800000>;
+			};
+			opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-microvolt = <800000>;
+			};
+			opp-750000000 {
+					opp-hz = /bits/ 64 <750000000>;
+					opp-microvolt = <800000>;
+			};
+			opp-1500000000 {
+					opp-hz = /bits/ 64 <1500000000>;
+					opp-microvolt = <1040000>;
+			};
+	};
+
 	gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
 		compatible = "fixed-clock";
 		clock-output-names = "gmac0_rgmii_rxin";
-- 
2.39.2


WARNING: multiple messages have this Message-ID (diff)
From: Mason Huo <mason.huo@starfivetech.com>
To: "Rafael J. Wysocki" <rafael@kernel.org>,
	Viresh Kumar <viresh.kumar@linaro.org>,
	Emil Renner Berthing <kernel@esmil.dk>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor@kernel.org>,
	"Paul Walmsley" <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>
Cc: Shengyu Qu <wiagn233@outlook.com>, <linux-pm@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-riscv@lists.infradead.org>,
	Mason Huo <mason.huo@starfivetech.com>
Subject: [PATCH v2 3/3] riscv: dts: starfive: Add cpu scaling for JH7110 SoC
Date: Mon, 17 Apr 2023 14:39:42 +0800	[thread overview]
Message-ID: <20230417063942.3141-4-mason.huo@starfivetech.com> (raw)
In-Reply-To: <20230417063942.3141-1-mason.huo@starfivetech.com>

Add the operating-points-v2 to support cpu scaling on StarFive JH7110 SoC.
It supports up to 4 cpu frequency loads.

Signed-off-by: Mason Huo <mason.huo@starfivetech.com>
---
 .../jh7110-starfive-visionfive-2.dtsi         | 17 ++++++++++
 arch/riscv/boot/dts/starfive/jh7110.dtsi      | 33 +++++++++++++++++++
 2 files changed, 50 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
index cca1c8040801..b25e6d68ce53 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
@@ -227,3 +227,20 @@ &uart0 {
 	pinctrl-0 = <&uart0_pins>;
 	status = "okay";
 };
+
+&U74_1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_4 {
+	cpu-supply = <&vdd_cpu>;
+};
+
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..7eef88d2cedb 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -53,6 +53,9 @@ U74_1: cpu@1 {
 			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc_zba_zbb";
 			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
 
 			cpu1_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -79,6 +82,9 @@ U74_2: cpu@2 {
 			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc_zba_zbb";
 			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
 
 			cpu2_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -105,6 +111,9 @@ U74_3: cpu@3 {
 			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc_zba_zbb";
 			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
 
 			cpu3_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -131,6 +140,9 @@ U74_4: cpu@4 {
 			next-level-cache = <&ccache>;
 			riscv,isa = "rv64imafdc_zba_zbb";
 			tlb-split;
+			operating-points-v2 = <&cpu_opp>;
+			clocks = <&syscrg JH7110_SYSCLK_CPU_CORE>;
+			clock-names = "cpu";
 
 			cpu4_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -164,6 +176,27 @@ core4 {
 		};
 	};
 
+	cpu_opp: opp-table-0 {
+			compatible = "operating-points-v2";
+			opp-shared;
+			opp-375000000 {
+					opp-hz = /bits/ 64 <375000000>;
+					opp-microvolt = <800000>;
+			};
+			opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-microvolt = <800000>;
+			};
+			opp-750000000 {
+					opp-hz = /bits/ 64 <750000000>;
+					opp-microvolt = <800000>;
+			};
+			opp-1500000000 {
+					opp-hz = /bits/ 64 <1500000000>;
+					opp-microvolt = <1040000>;
+			};
+	};
+
 	gmac0_rgmii_rxin: gmac0-rgmii-rxin-clock {
 		compatible = "fixed-clock";
 		clock-output-names = "gmac0_rgmii_rxin";
-- 
2.39.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2023-04-17  6:40 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-17  6:39 [PATCH v2 0/3] Add JH7110 cpufreq support Mason Huo
2023-04-17  6:39 ` Mason Huo
2023-04-17  6:39 ` [PATCH v2 1/3] riscv: dts: starfive: Enable axp15060 pmic for cpufreq Mason Huo
2023-04-17  6:39   ` Mason Huo
2023-04-17  6:39 ` [PATCH v2 2/3] cpufreq: dt-platdev: Add JH7110 SOC to the allowlist Mason Huo
2023-04-17  6:39   ` Mason Huo
2023-04-17  6:39 ` Mason Huo [this message]
2023-04-17  6:39   ` [PATCH v2 3/3] riscv: dts: starfive: Add cpu scaling for JH7110 SoC Mason Huo
2023-04-18 17:28   ` Conor Dooley
2023-04-18 17:28     ` Conor Dooley
2023-04-20  7:10     ` Mason Huo
2023-04-20  7:10       ` Mason Huo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230417063942.3141-4-mason.huo@starfivetech.com \
    --to=mason.huo@starfivetech.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@esmil.dk \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=viresh.kumar@linaro.org \
    --cc=wiagn233@outlook.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.