From: Tony Lindgren <tony@atomide.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jirislaby@kernel.org>
Cc: "Andy Shevchenko" <andriy.shevchenko@intel.com>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
"Johan Hovold" <johan@kernel.org>,
"Sebastian Andrzej Siewior" <bigeasy@linutronix.de>,
"Vignesh Raghavendra" <vigneshr@ti.com>,
linux-omap@vger.kernel.org, linux-serial@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/1] serial: 8250: Reinit port->pm on port specific driver unbind
Date: Tue, 18 Apr 2023 13:14:06 +0300 [thread overview]
Message-ID: <20230418101407.12403-1-tony@atomide.com> (raw)
When we unbind a serial port hardware specific 8250 driver, the generic
serial8250 driver takes over the port. After that we see an oops about 10
seconds later. This can produce the following at least on some TI SoCs:
Unhandled fault: imprecise external abort (0x1406)
Internal error: : 1406 [#1] SMP ARM
Turns out that we may still have the serial port hardware specific driver
port->pm in use, and serial8250_pm() tries to call it after the port
specific driver is gone:
serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base]
uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base]
uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c
__tty_hangup.part.0 from disassociate_ctty+0x154/0x20c
disassociate_ctty from do_exit+0x744/0xaac
do_exit from do_group_exit+0x40/0x8c
do_group_exit from __wake_up_parent+0x0/0x1c
Let's fix the issue by calling serial8250_set_defaults() in
serial8250_unregister_port(). This will set the port back to using
the serial8250 default functions, and sets the port->pm to point to
serial8250_pm.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
Changes since v1:
- Call serial8250_init_port() instead of just clearing port->pm
- Updated patch subject line a bit
---
drivers/tty/serial/8250/8250_core.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1158,6 +1158,7 @@ void serial8250_unregister_port(int line)
uart->port.type = PORT_UNKNOWN;
uart->port.dev = &serial8250_isa_devs->dev;
uart->capabilities = 0;
+ serial8250_init_port(uart);
serial8250_apply_quirks(uart);
uart_add_one_port(&serial8250_reg, &uart->port);
} else {
--
2.40.0
reply other threads:[~2023-04-18 10:14 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230418101407.12403-1-tony@atomide.com \
--to=tony@atomide.com \
--cc=andriy.shevchenko@intel.com \
--cc=bigeasy@linutronix.de \
--cc=gregkh@linuxfoundation.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=jirislaby@kernel.org \
--cc=johan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.