From: Tom Rix <trix@redhat.com>
To: chunkuang.hu@kernel.org, p.zabel@pengutronix.de,
chunfeng.yun@mediatek.com, vkoul@kernel.org, kishon@kernel.org,
matthias.bgg@gmail.com, angelogioacchino.delregno@collabora.com
Cc: dri-devel@lists.freedesktop.org,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org,
Tom Rix <trix@redhat.com>
Subject: [PATCH] phy: mediatek: rework the floating point comparisons to fixed point
Date: Sun, 30 Apr 2023 22:57:16 -0400 [thread overview]
Message-ID: <20230501025716.2905609-1-trix@redhat.com> (raw)
gcc on aarch64 reports
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c: In function ‘mtk_hdmi_pll_set_rate’:
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c:240:52: error: ‘-mgeneral-regs-only’
is incompatible with the use of floating-point types
240 | else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
Floating point should not be used, so rework the floating point comparisons
to fixed point.
Signed-off-by: Tom Rix <trix@redhat.com>
---
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index abfc077fb0a8..c9501a3d90a5 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -237,11 +237,11 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
*/
if (tmds_clk < 54 * MEGA)
txposdiv = 8;
- else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
+ else if (tmds_clk >= 54 * MEGA && (tmds_clk * 100) < 14835 * MEGA)
txposdiv = 4;
- else if (tmds_clk >= 148.35 * MEGA && tmds_clk < 296.7 * MEGA)
+ else if ((tmds_clk * 100) >= 14835 * MEGA && (tmds_clk * 10) < 2967 * MEGA)
txposdiv = 2;
- else if (tmds_clk >= 296.7 * MEGA && tmds_clk <= 594 * MEGA)
+ else if ((tmds_clk * 10) >= 2967 * MEGA && tmds_clk <= 594 * MEGA)
txposdiv = 1;
else
return -EINVAL;
@@ -328,12 +328,12 @@ static int mtk_hdmi_pll_drv_setting(struct clk_hw *hw)
clk_channel_bias = 0x34; /* 20mA */
impedance_en = 0xf;
impedance = 0x36; /* 100ohm */
- } else if (pixel_clk >= 74.175 * MEGA && pixel_clk <= 300 * MEGA) {
+ } else if ((pixel_clk * 1000) >= 74175 * MEGA && pixel_clk <= 300 * MEGA) {
data_channel_bias = 0x34; /* 20mA */
clk_channel_bias = 0x2c; /* 16mA */
impedance_en = 0xf;
impedance = 0x36; /* 100ohm */
- } else if (pixel_clk >= 27 * MEGA && pixel_clk < 74.175 * MEGA) {
+ } else if (pixel_clk >= 27 * MEGA && (pixel_clk * 1000) < 74175 * MEGA) {
data_channel_bias = 0x14; /* 10mA */
clk_channel_bias = 0x14; /* 10mA */
impedance_en = 0x0;
--
2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Tom Rix <trix@redhat.com>
To: chunkuang.hu@kernel.org, p.zabel@pengutronix.de,
chunfeng.yun@mediatek.com, vkoul@kernel.org, kishon@kernel.org,
matthias.bgg@gmail.com, angelogioacchino.delregno@collabora.com
Cc: Tom Rix <trix@redhat.com>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-mediatek@lists.infradead.org,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH] phy: mediatek: rework the floating point comparisons to fixed point
Date: Sun, 30 Apr 2023 22:57:16 -0400 [thread overview]
Message-ID: <20230501025716.2905609-1-trix@redhat.com> (raw)
gcc on aarch64 reports
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c: In function ‘mtk_hdmi_pll_set_rate’:
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c:240:52: error: ‘-mgeneral-regs-only’
is incompatible with the use of floating-point types
240 | else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
Floating point should not be used, so rework the floating point comparisons
to fixed point.
Signed-off-by: Tom Rix <trix@redhat.com>
---
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index abfc077fb0a8..c9501a3d90a5 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -237,11 +237,11 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
*/
if (tmds_clk < 54 * MEGA)
txposdiv = 8;
- else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
+ else if (tmds_clk >= 54 * MEGA && (tmds_clk * 100) < 14835 * MEGA)
txposdiv = 4;
- else if (tmds_clk >= 148.35 * MEGA && tmds_clk < 296.7 * MEGA)
+ else if ((tmds_clk * 100) >= 14835 * MEGA && (tmds_clk * 10) < 2967 * MEGA)
txposdiv = 2;
- else if (tmds_clk >= 296.7 * MEGA && tmds_clk <= 594 * MEGA)
+ else if ((tmds_clk * 10) >= 2967 * MEGA && tmds_clk <= 594 * MEGA)
txposdiv = 1;
else
return -EINVAL;
@@ -328,12 +328,12 @@ static int mtk_hdmi_pll_drv_setting(struct clk_hw *hw)
clk_channel_bias = 0x34; /* 20mA */
impedance_en = 0xf;
impedance = 0x36; /* 100ohm */
- } else if (pixel_clk >= 74.175 * MEGA && pixel_clk <= 300 * MEGA) {
+ } else if ((pixel_clk * 1000) >= 74175 * MEGA && pixel_clk <= 300 * MEGA) {
data_channel_bias = 0x34; /* 20mA */
clk_channel_bias = 0x2c; /* 16mA */
impedance_en = 0xf;
impedance = 0x36; /* 100ohm */
- } else if (pixel_clk >= 27 * MEGA && pixel_clk < 74.175 * MEGA) {
+ } else if (pixel_clk >= 27 * MEGA && (pixel_clk * 1000) < 74175 * MEGA) {
data_channel_bias = 0x14; /* 10mA */
clk_channel_bias = 0x14; /* 10mA */
impedance_en = 0x0;
--
2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Tom Rix <trix@redhat.com>
To: chunkuang.hu@kernel.org, p.zabel@pengutronix.de,
chunfeng.yun@mediatek.com, vkoul@kernel.org, kishon@kernel.org,
matthias.bgg@gmail.com, angelogioacchino.delregno@collabora.com
Cc: dri-devel@lists.freedesktop.org,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org,
Tom Rix <trix@redhat.com>
Subject: [PATCH] phy: mediatek: rework the floating point comparisons to fixed point
Date: Sun, 30 Apr 2023 22:57:16 -0400 [thread overview]
Message-ID: <20230501025716.2905609-1-trix@redhat.com> (raw)
gcc on aarch64 reports
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c: In function ‘mtk_hdmi_pll_set_rate’:
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c:240:52: error: ‘-mgeneral-regs-only’
is incompatible with the use of floating-point types
240 | else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
Floating point should not be used, so rework the floating point comparisons
to fixed point.
Signed-off-by: Tom Rix <trix@redhat.com>
---
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index abfc077fb0a8..c9501a3d90a5 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -237,11 +237,11 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
*/
if (tmds_clk < 54 * MEGA)
txposdiv = 8;
- else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
+ else if (tmds_clk >= 54 * MEGA && (tmds_clk * 100) < 14835 * MEGA)
txposdiv = 4;
- else if (tmds_clk >= 148.35 * MEGA && tmds_clk < 296.7 * MEGA)
+ else if ((tmds_clk * 100) >= 14835 * MEGA && (tmds_clk * 10) < 2967 * MEGA)
txposdiv = 2;
- else if (tmds_clk >= 296.7 * MEGA && tmds_clk <= 594 * MEGA)
+ else if ((tmds_clk * 10) >= 2967 * MEGA && tmds_clk <= 594 * MEGA)
txposdiv = 1;
else
return -EINVAL;
@@ -328,12 +328,12 @@ static int mtk_hdmi_pll_drv_setting(struct clk_hw *hw)
clk_channel_bias = 0x34; /* 20mA */
impedance_en = 0xf;
impedance = 0x36; /* 100ohm */
- } else if (pixel_clk >= 74.175 * MEGA && pixel_clk <= 300 * MEGA) {
+ } else if ((pixel_clk * 1000) >= 74175 * MEGA && pixel_clk <= 300 * MEGA) {
data_channel_bias = 0x34; /* 20mA */
clk_channel_bias = 0x2c; /* 16mA */
impedance_en = 0xf;
impedance = 0x36; /* 100ohm */
- } else if (pixel_clk >= 27 * MEGA && pixel_clk < 74.175 * MEGA) {
+ } else if (pixel_clk >= 27 * MEGA && (pixel_clk * 1000) < 74175 * MEGA) {
data_channel_bias = 0x14; /* 10mA */
clk_channel_bias = 0x14; /* 10mA */
impedance_en = 0x0;
--
2.27.0
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Tom Rix <trix@redhat.com>
To: chunkuang.hu@kernel.org, p.zabel@pengutronix.de,
chunfeng.yun@mediatek.com, vkoul@kernel.org, kishon@kernel.org,
matthias.bgg@gmail.com, angelogioacchino.delregno@collabora.com
Cc: dri-devel@lists.freedesktop.org,
linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org,
Tom Rix <trix@redhat.com>
Subject: [PATCH] phy: mediatek: rework the floating point comparisons to fixed point
Date: Sun, 30 Apr 2023 22:57:16 -0400 [thread overview]
Message-ID: <20230501025716.2905609-1-trix@redhat.com> (raw)
gcc on aarch64 reports
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c: In function ‘mtk_hdmi_pll_set_rate’:
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c:240:52: error: ‘-mgeneral-regs-only’
is incompatible with the use of floating-point types
240 | else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
Floating point should not be used, so rework the floating point comparisons
to fixed point.
Signed-off-by: Tom Rix <trix@redhat.com>
---
drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
index abfc077fb0a8..c9501a3d90a5 100644
--- a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
+++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
@@ -237,11 +237,11 @@ static int mtk_hdmi_pll_calc(struct mtk_hdmi_phy *hdmi_phy, struct clk_hw *hw,
*/
if (tmds_clk < 54 * MEGA)
txposdiv = 8;
- else if (tmds_clk >= 54 * MEGA && tmds_clk < 148.35 * MEGA)
+ else if (tmds_clk >= 54 * MEGA && (tmds_clk * 100) < 14835 * MEGA)
txposdiv = 4;
- else if (tmds_clk >= 148.35 * MEGA && tmds_clk < 296.7 * MEGA)
+ else if ((tmds_clk * 100) >= 14835 * MEGA && (tmds_clk * 10) < 2967 * MEGA)
txposdiv = 2;
- else if (tmds_clk >= 296.7 * MEGA && tmds_clk <= 594 * MEGA)
+ else if ((tmds_clk * 10) >= 2967 * MEGA && tmds_clk <= 594 * MEGA)
txposdiv = 1;
else
return -EINVAL;
@@ -328,12 +328,12 @@ static int mtk_hdmi_pll_drv_setting(struct clk_hw *hw)
clk_channel_bias = 0x34; /* 20mA */
impedance_en = 0xf;
impedance = 0x36; /* 100ohm */
- } else if (pixel_clk >= 74.175 * MEGA && pixel_clk <= 300 * MEGA) {
+ } else if ((pixel_clk * 1000) >= 74175 * MEGA && pixel_clk <= 300 * MEGA) {
data_channel_bias = 0x34; /* 20mA */
clk_channel_bias = 0x2c; /* 16mA */
impedance_en = 0xf;
impedance = 0x36; /* 100ohm */
- } else if (pixel_clk >= 27 * MEGA && pixel_clk < 74.175 * MEGA) {
+ } else if (pixel_clk >= 27 * MEGA && (pixel_clk * 1000) < 74175 * MEGA) {
data_channel_bias = 0x14; /* 10mA */
clk_channel_bias = 0x14; /* 10mA */
impedance_en = 0x0;
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-05-01 2:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-01 2:57 Tom Rix [this message]
2023-05-01 2:57 ` [PATCH] phy: mediatek: rework the floating point comparisons to fixed point Tom Rix
2023-05-01 2:57 ` Tom Rix
2023-05-01 2:57 ` Tom Rix
2023-05-01 5:14 ` kernel test robot
2023-05-01 5:14 ` kernel test robot
2023-05-01 5:14 ` kernel test robot
2023-05-01 5:14 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230501025716.2905609-1-trix@redhat.com \
--to=trix@redhat.com \
--cc=angelogioacchino.delregno@collabora.com \
--cc=chunfeng.yun@mediatek.com \
--cc=chunkuang.hu@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=kishon@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-phy@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=p.zabel@pengutronix.de \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.