[PATCH 5/5] HID: amd_sfh: Split sensor and HID initialization for SFH1.1

[Basavaraj Natikar <Basavaraj.Natikar@amd.com>]

Sensors are enabled independently of HID device initialization. Sensor
initialization should be kept separate in this case, while HID devices
should be initialized according to the sensor state. Hence split sensor
initialization and HID initialization for SFH1.1 into separate blocks.

Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
---
 drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
index 2102d53bd51f..e9c6413af24a 100644
--- a/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
+++ b/drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c
@@ -168,16 +168,16 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata)
 		status = amd_sfh_wait_for_response
 				(privdata, cl_data->sensor_idx[i], ENABLE_SENSOR);
 
-		status = (status == 0) ? SENSOR_ENABLED : SENSOR_DISABLED;
+		cl_data->sensor_sts[i] = (status == 0) ? SENSOR_ENABLED : SENSOR_DISABLED;
+	}
 
-		if (status == SENSOR_ENABLED) {
+	for (i = 0; i < cl_data->num_hid_devices; i++) {
+		cl_data->cur_hid_dev = i;
+		if (cl_data->sensor_sts[i] == SENSOR_ENABLED) {
 			cl_data->is_any_sensor_enabled = true;
-			cl_data->sensor_sts[i] = SENSOR_ENABLED;
 			rc = amdtp_hid_probe(i, cl_data);
 			if (rc)
 				goto cleanup;
-		} else {
-			cl_data->sensor_sts[i] = SENSOR_DISABLED;
 		}
 		dev_dbg(dev, "sid 0x%x (%s) status 0x%x\n",
 			cl_data->sensor_idx[i], get_sensor_name(cl_data->sensor_idx[i]),
-- 
2.25.1