From: Chris Morgan <macroalpha82@gmail.com> To: linux-rockchip@lists.infradead.org Cc: devicetree@vger.kernel.org, maccraft123mc@gmail.com, sebastian.reichel@collabora.com, jagan@amarulasolutions.com, heiko@sntech.de, conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org, Chris Morgan <macromorgan@hotmail.com> Subject: [PATCH 2/2] arm64: dts: rockchip: add Anbernic RG353PS Date: Fri, 12 May 2023 11:20:39 -0500 [thread overview] Message-ID: <20230512162039.31132-3-macroalpha82@gmail.com> (raw) In-Reply-To: <20230512162039.31132-1-macroalpha82@gmail.com> From: Chris Morgan <macromorgan@hotmail.com> Add support for the Anbernic RG353PS. This device is identical in form factor to the RG353P and has the following hardware differences: - No touchscreen is present on i2c2 (or at all). - Only contains 1GB of RAM. - Has no eMMC. - Only appears to ship with the 2nd revision of the display panel. Note that the display panel has been added to the st7703 panel driver in a separate commit series. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3566-anbernic-rg353ps.dts | 116 ++++++++++++++++++ 2 files changed, 117 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 2d585bbb8f3a..b6f7158c4552 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -69,6 +69,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts new file mode 100644 index 000000000000..b211973e36c2 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rg353x.dtsi" + +/ { + model = "RG353PS"; + compatible = "anbernic,rg353ps", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdmmc1; + mmc2 = &sdmmc2; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3472000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>, + <3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>, + <3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>, + <3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>, + <3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>, + <3400000 0>; + }; + + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; +}; + +&gpio_keys_control { + button-r1 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; +}; + +&panel { + compatible = "anbernic,rg353v-panel-v2"; + iovcc-supply = <&vcc3v3_lcd0_n>; + vcc-supply = <&vcc3v3_lcd0_n>; + /delete-property/ vdd-supply; +}; + +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rk817 { + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; +}; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Chris Morgan <macroalpha82@gmail.com> To: linux-rockchip@lists.infradead.org Cc: devicetree@vger.kernel.org, maccraft123mc@gmail.com, sebastian.reichel@collabora.com, jagan@amarulasolutions.com, heiko@sntech.de, conor+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, robh+dt@kernel.org, Chris Morgan <macromorgan@hotmail.com> Subject: [PATCH 2/2] arm64: dts: rockchip: add Anbernic RG353PS Date: Fri, 12 May 2023 11:20:39 -0500 [thread overview] Message-ID: <20230512162039.31132-3-macroalpha82@gmail.com> (raw) In-Reply-To: <20230512162039.31132-1-macroalpha82@gmail.com> From: Chris Morgan <macromorgan@hotmail.com> Add support for the Anbernic RG353PS. This device is identical in form factor to the RG353P and has the following hardware differences: - No touchscreen is present on i2c2 (or at all). - Only contains 1GB of RAM. - Has no eMMC. - Only appears to ship with the 2nd revision of the display panel. Note that the display panel has been added to the st7703 panel driver in a separate commit series. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../dts/rockchip/rk3566-anbernic-rg353ps.dts | 116 ++++++++++++++++++ 2 files changed, 117 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 2d585bbb8f3a..b6f7158c4552 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -69,6 +69,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts new file mode 100644 index 000000000000..b211973e36c2 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353ps.dts @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3566-anbernic-rg353x.dtsi" + +/ { + model = "RG353PS"; + compatible = "anbernic,rg353ps", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdmmc1; + mmc2 = &sdmmc2; + }; + + battery: battery { + compatible = "simple-battery"; + charge-full-design-microamp-hours = <3472000>; + charge-term-current-microamp = <300000>; + constant-charge-current-max-microamp = <2000000>; + constant-charge-voltage-max-microvolt = <4200000>; + factory-internal-resistance-micro-ohms = <117000>; + voltage-max-design-microvolt = <4172000>; + voltage-min-design-microvolt = <3400000>; + + ocv-capacity-celsius = <20>; + ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>, + <3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>, + <3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>, + <3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>, + <3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>, + <3400000 0>; + }; + + /* Channels reversed for both headphones and speakers. */ + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "rk817_ext"; + simple-audio-card,aux-devs = <&spk_amp>; + simple-audio-card,format = "i2s"; + simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>; + simple-audio-card,mclk-fs = <256>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphones", + "Speaker", "Internal Speakers"; + simple-audio-card,routing = + "MICL", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR", + "Internal Speakers", "Speaker Amp OUTL", + "Internal Speakers", "Speaker Amp OUTR", + "Speaker Amp INL", "HPOL", + "Speaker Amp INR", "HPOR"; + simple-audio-card,pin-switches = "Internal Speakers"; + + simple-audio-card,codec { + sound-dai = <&rk817>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + }; + + spk_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&spk_amp_enable_h>; + pinctrl-names = "default"; + sound-name-prefix = "Speaker Amp"; + }; +}; + +&gpio_keys_control { + button-r1 { + gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>; + label = "TR"; + linux,code = <BTN_TR>; + }; + + button-r2 { + gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>; + label = "TR2"; + linux,code = <BTN_TR2>; + }; +}; + +&panel { + compatible = "anbernic,rg353v-panel-v2"; + iovcc-supply = <&vcc3v3_lcd0_n>; + vcc-supply = <&vcc3v3_lcd0_n>; + /delete-property/ vdd-supply; +}; + +&pinctrl { + audio-amplifier { + spk_amp_enable_h: spk-amp-enable-h { + rockchip,pins = + <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&rk817 { + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; +}; -- 2.34.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip
next prev parent reply other threads:[~2023-05-12 16:20 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-05-12 16:20 [PATCH 0/2] rockchip: Add Anbernic RG353PS Chris Morgan 2023-05-12 16:20 ` Chris Morgan 2023-05-12 16:20 ` [PATCH 1/2] dt-bindings: arm: rockchip: add " Chris Morgan 2023-05-12 16:20 ` Chris Morgan 2023-05-12 21:39 ` Conor Dooley 2023-05-12 21:39 ` Conor Dooley 2023-05-12 16:20 ` Chris Morgan [this message] 2023-05-12 16:20 ` [PATCH 2/2] arm64: dts: " Chris Morgan 2023-05-13 16:49 ` [PATCH 0/2] rockchip: Add " Heiko Stuebner 2023-05-13 16:49 ` Heiko Stuebner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230512162039.31132-3-macroalpha82@gmail.com \ --to=macroalpha82@gmail.com \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=jagan@amarulasolutions.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=maccraft123mc@gmail.com \ --cc=macromorgan@hotmail.com \ --cc=robh+dt@kernel.org \ --cc=sebastian.reichel@collabora.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.