From: Andrew Davis <afd@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Robert Nelson <robertcnelson@gmail.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Andrew Davis <afd@ti.com>
Subject: [PATCH 2/5] arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes
Date: Mon, 15 May 2023 12:21:34 -0500 [thread overview]
Message-ID: <20230515172137.474626-2-afd@ti.com> (raw)
In-Reply-To: <20230515172137.474626-1-afd@ti.com>
These nodes are example nodes for the PCIe controller in "endpoint" mode.
By default the controller is in "root complex" mode and there is already a
DT node for the same.
Examples should go in the bindings or other documentation.
Remove this node.
Signed-off-by: Andrew Davis <afd@ti.com>
---
.../boot/dts/ti/k3-j721e-beagleboneai64.dts | 24 ------
.../dts/ti/k3-j721e-common-proc-board.dts | 25 ------
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 82 -------------------
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 24 ------
4 files changed, 155 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index 8a62ac263b89..d77eeff0d81d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -892,35 +892,11 @@ &pcie2_rc {
status = "disabled";
};
-&pcie0_ep {
- status = "disabled";
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
-};
-
-&pcie1_ep {
- status = "disabled";
- phys = <&serdes1_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
-};
-
-&pcie2_ep {
- /* Unused */
- status = "disabled";
-};
-
&pcie3_rc {
/* Unused */
status = "disabled";
};
-&pcie3_ep {
- /* Unused */
- status = "disabled";
-};
-
&icssg0_mdio {
/* Unused */
status = "disabled";
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 7db0603125aa..87b7263f6547 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -840,35 +840,10 @@ &pcie2_rc {
num-lanes = <2>;
};
-&pcie0_ep {
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
- status = "disabled";
-};
-
-&pcie1_ep {
- phys = <&serdes1_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
- status = "disabled";
-};
-
-&pcie2_ep {
- phys = <&serdes2_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
- status = "disabled";
-};
-
&pcie3_rc {
status = "disabled";
};
-&pcie3_ep {
- status = "disabled";
-};
-
&icssg0_mdio {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 10c8a5fb4ee2..e39f6d1e8d40 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -816,26 +816,6 @@ pcie0_rc: pcie@2900000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie0_ep: pcie-ep@2900000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02900000 0x00 0x1000>,
- <0x00 0x02907000 0x00 0x400>,
- <0x00 0x0d000000 0x00 0x00800000>,
- <0x00 0x10000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 239 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
pcie1_rc: pcie@2910000 {
compatible = "ti,j721e-pcie-host";
reg = <0x00 0x02910000 0x00 0x1000>,
@@ -864,26 +844,6 @@ pcie1_rc: pcie@2910000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie1_ep: pcie-ep@2910000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02910000 0x00 0x1000>,
- <0x00 0x02917000 0x00 0x400>,
- <0x00 0x0d800000 0x00 0x00800000>,
- <0x00 0x18000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 240 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
pcie2_rc: pcie@2920000 {
compatible = "ti,j721e-pcie-host";
reg = <0x00 0x02920000 0x00 0x1000>,
@@ -912,26 +872,6 @@ pcie2_rc: pcie@2920000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie2_ep: pcie-ep@2920000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02920000 0x00 0x1000>,
- <0x00 0x02927000 0x00 0x400>,
- <0x00 0x0e000000 0x00 0x00800000>,
- <0x44 0x00000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 241 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
pcie3_rc: pcie@2930000 {
compatible = "ti,j721e-pcie-host";
reg = <0x00 0x02930000 0x00 0x1000>,
@@ -960,28 +900,6 @@ pcie3_rc: pcie@2930000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie3_ep: pcie-ep@2930000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02930000 0x00 0x1000>,
- <0x00 0x02937000 0x00 0x400>,
- <0x00 0x0e800000 0x00 0x00800000>,
- <0x44 0x10000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 242 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- #address-cells = <2>;
- #size-cells = <2>;
- };
-
serdes_wiz4: wiz@5050000 {
compatible = "ti,am64-wiz-10g";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index f650a7fd66b4..07d3282a583b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -896,35 +896,11 @@ &pcie2_rc {
status = "disabled";
};
-&pcie0_ep {
- status = "disabled";
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
-};
-
-&pcie1_ep {
- status = "disabled";
- phys = <&serdes1_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
-};
-
-&pcie2_ep {
- /* Unused */
- status = "disabled";
-};
-
&pcie3_rc {
/* Unused */
status = "disabled";
};
-&pcie3_ep {
- /* Unused */
- status = "disabled";
-};
-
&icssg0_mdio {
status = "disabled";
};
--
2.39.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Andrew Davis <afd@ti.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Tero Kristo <kristo@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Robert Nelson <robertcnelson@gmail.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Andrew Davis <afd@ti.com>
Subject: [PATCH 2/5] arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes
Date: Mon, 15 May 2023 12:21:34 -0500 [thread overview]
Message-ID: <20230515172137.474626-2-afd@ti.com> (raw)
In-Reply-To: <20230515172137.474626-1-afd@ti.com>
These nodes are example nodes for the PCIe controller in "endpoint" mode.
By default the controller is in "root complex" mode and there is already a
DT node for the same.
Examples should go in the bindings or other documentation.
Remove this node.
Signed-off-by: Andrew Davis <afd@ti.com>
---
.../boot/dts/ti/k3-j721e-beagleboneai64.dts | 24 ------
.../dts/ti/k3-j721e-common-proc-board.dts | 25 ------
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 82 -------------------
arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 24 ------
4 files changed, 155 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index 8a62ac263b89..d77eeff0d81d 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -892,35 +892,11 @@ &pcie2_rc {
status = "disabled";
};
-&pcie0_ep {
- status = "disabled";
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
-};
-
-&pcie1_ep {
- status = "disabled";
- phys = <&serdes1_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
-};
-
-&pcie2_ep {
- /* Unused */
- status = "disabled";
-};
-
&pcie3_rc {
/* Unused */
status = "disabled";
};
-&pcie3_ep {
- /* Unused */
- status = "disabled";
-};
-
&icssg0_mdio {
/* Unused */
status = "disabled";
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 7db0603125aa..87b7263f6547 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -840,35 +840,10 @@ &pcie2_rc {
num-lanes = <2>;
};
-&pcie0_ep {
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
- status = "disabled";
-};
-
-&pcie1_ep {
- phys = <&serdes1_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
- status = "disabled";
-};
-
-&pcie2_ep {
- phys = <&serdes2_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
- status = "disabled";
-};
-
&pcie3_rc {
status = "disabled";
};
-&pcie3_ep {
- status = "disabled";
-};
-
&icssg0_mdio {
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 10c8a5fb4ee2..e39f6d1e8d40 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -816,26 +816,6 @@ pcie0_rc: pcie@2900000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie0_ep: pcie-ep@2900000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02900000 0x00 0x1000>,
- <0x00 0x02907000 0x00 0x400>,
- <0x00 0x0d000000 0x00 0x00800000>,
- <0x00 0x10000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4070>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 239 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 239 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
pcie1_rc: pcie@2910000 {
compatible = "ti,j721e-pcie-host";
reg = <0x00 0x02910000 0x00 0x1000>,
@@ -864,26 +844,6 @@ pcie1_rc: pcie@2910000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie1_ep: pcie-ep@2910000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02910000 0x00 0x1000>,
- <0x00 0x02917000 0x00 0x400>,
- <0x00 0x0d800000 0x00 0x00800000>,
- <0x00 0x18000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4074>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 240 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 240 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
pcie2_rc: pcie@2920000 {
compatible = "ti,j721e-pcie-host";
reg = <0x00 0x02920000 0x00 0x1000>,
@@ -912,26 +872,6 @@ pcie2_rc: pcie@2920000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie2_ep: pcie-ep@2920000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02920000 0x00 0x1000>,
- <0x00 0x02927000 0x00 0x400>,
- <0x00 0x0e000000 0x00 0x00800000>,
- <0x44 0x00000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 342 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x4078>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 241 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 241 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- };
-
pcie3_rc: pcie@2930000 {
compatible = "ti,j721e-pcie-host";
reg = <0x00 0x02930000 0x00 0x1000>,
@@ -960,28 +900,6 @@ pcie3_rc: pcie@2930000 {
dma-ranges = <0x02000000 0x0 0x0 0x0 0x0 0x10000 0x0>;
};
- pcie3_ep: pcie-ep@2930000 {
- compatible = "ti,j721e-pcie-ep";
- reg = <0x00 0x02930000 0x00 0x1000>,
- <0x00 0x02937000 0x00 0x400>,
- <0x00 0x0e800000 0x00 0x00800000>,
- <0x44 0x10000000 0x00 0x08000000>;
- reg-names = "intd_cfg", "user_cfg", "reg", "mem";
- interrupt-names = "link_state";
- interrupts = <GIC_SPI 354 IRQ_TYPE_EDGE_RISING>;
- ti,syscon-pcie-ctrl = <&scm_conf 0x407c>;
- max-link-speed = <3>;
- num-lanes = <2>;
- power-domains = <&k3_pds 242 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 242 1>;
- clock-names = "fck";
- max-functions = /bits/ 8 <6>;
- max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
- dma-coherent;
- #address-cells = <2>;
- #size-cells = <2>;
- };
-
serdes_wiz4: wiz@5050000 {
compatible = "ti,am64-wiz-10g";
#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index f650a7fd66b4..07d3282a583b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -896,35 +896,11 @@ &pcie2_rc {
status = "disabled";
};
-&pcie0_ep {
- status = "disabled";
- phys = <&serdes0_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <1>;
-};
-
-&pcie1_ep {
- status = "disabled";
- phys = <&serdes1_pcie_link>;
- phy-names = "pcie-phy";
- num-lanes = <2>;
-};
-
-&pcie2_ep {
- /* Unused */
- status = "disabled";
-};
-
&pcie3_rc {
/* Unused */
status = "disabled";
};
-&pcie3_ep {
- /* Unused */
- status = "disabled";
-};
-
&icssg0_mdio {
status = "disabled";
};
--
2.39.2
next prev parent reply other threads:[~2023-05-15 17:22 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-05-15 17:21 [PATCH 1/5] arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status Andrew Davis
2023-05-15 17:21 ` Andrew Davis
2023-05-15 17:21 ` Andrew Davis [this message]
2023-05-15 17:21 ` [PATCH 2/5] arm64: dts: ti: k3-j721e: Remove PCIe endpoint nodes Andrew Davis
2023-05-16 16:22 ` Verma, Achal
2023-05-16 16:22 ` Verma, Achal
2023-05-16 16:27 ` Andrew Davis
2023-05-16 16:27 ` Andrew Davis
2023-06-05 14:54 ` Verma, Achal
2023-06-05 14:54 ` Verma, Achal
2023-06-05 15:17 ` Andrew Davis
2023-06-05 15:17 ` Andrew Davis
2023-06-05 16:06 ` Verma, Achal
2023-06-05 16:06 ` Verma, Achal
2023-05-15 17:21 ` [PATCH 3/5] arm64: dts: ti: k3-j721e: Enable PCIe nodes at the board level Andrew Davis
2023-05-15 17:21 ` Andrew Davis
2023-05-15 17:21 ` [PATCH 4/5] arm64: dts: ti: k3-am64: Enable Mailbox " Andrew Davis
2023-05-15 17:21 ` Andrew Davis
2023-05-15 17:21 ` [PATCH 5/5] arm64: dts: ti: k3-j721e: Enable MDIO " Andrew Davis
2023-05-15 17:21 ` Andrew Davis
2023-05-16 13:51 ` [PATCH 1/5] arm64: dts: ti: k3-j721e-beagleboneai64: Fix mailbox node status Nishanth Menon
2023-05-16 13:51 ` Nishanth Menon
2023-06-15 10:30 ` Vignesh Raghavendra
2023-06-15 10:30 ` Vignesh Raghavendra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230515172137.474626-2-afd@ti.com \
--to=afd@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robertcnelson@gmail.com \
--cc=robh+dt@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.