[PATCH v3] ARM: dts: meson8: correct uart_B and uart_C clock references

[Martin Blumenstingl <martin.blumenstingl@googlemail.com>]

On Meson8 uart_B and uart_C do not work, because they are relying on
incorrect clocks. Change the references of pclk to the correct CLKID
(UART1 for uart_B and UART2 for uart_C), to allow use of the two uarts.

This was originally reported by Hans-Frieder Vogt for Meson8b [0], but
the same bug is also present in meson8.dtsi

[0] https://lore.kernel.org/linux-amlogic/trinity-bf20bcb9-790b-4ab9-99e3-0831ef8257f4-1680878185420@3c-app-gmx-bap55/

Fixes: 57007bfb5469 ("ARM: dts: meson8: Fix the UART device-tree schema validation")
Reported-by: Hans-Frieder Vogt <hfdevel@gmx.net> # for meson8b.dtsi
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
Changes since v1:
- move the link to the original report for Meson8b to the description

Changes since v2:
- use CLKID_UART1 for &uart_B (thanks Hans-Frieder Vogt for spotting my
  typo!)


 arch/arm/boot/dts/meson8.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi
index 4f22ab451aae..59932fbfd5d5 100644
--- a/arch/arm/boot/dts/meson8.dtsi
+++ b/arch/arm/boot/dts/meson8.dtsi
@@ -769,13 +769,13 @@ &uart_A {
 
 &uart_B {
 	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART1>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
 &uart_C {
 	compatible = "amlogic,meson8-uart";
-	clocks = <&xtal>, <&clkc CLKID_UART0>, <&clkc CLKID_CLK81>;
+	clocks = <&xtal>, <&clkc CLKID_UART2>, <&clkc CLKID_CLK81>;
 	clock-names = "xtal", "pclk", "baud";
 };
 
-- 
2.40.1