[PATCH v2 3/3] media: camss: Link CAMSS power domain

From: Yassine Oudjana <yassine.oudjana@gmail.com>
To: Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
	"Bryan O'Donoghue" <bryan.odonoghue@linaro.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Hans Verkuil <hansverk@cisco.com>
Cc: Yassine Oudjana <y.oudjana@protonmail.com>,
	Yassine Oudjana <yassine.oudjana@gmail.com>,
	Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
	linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 3/3] media: camss: Link CAMSS power domain
Date: Fri, 26 May 2023 21:07:12 +0300	[thread overview]
Message-ID: <20230526180712.8481-4-y.oudjana@protonmail.com> (raw)
In-Reply-To: <20230526180712.8481-1-y.oudjana@protonmail.com>

From: Yassine Oudjana <y.oudjana@protonmail.com>

The CAMSS power domain was previously enabled implicitly when the VFE
power domains were enabled.
Commit 46cc03175498 ("media: camss: Split power domain management")
delayed enabling VFE power domains which in turn delayed enabling the
CAMSS power domain. This made CSIPHY fail to enable camss_top_ahb_clk
which requires the CAMSS power domain to be on:

[  199.097810] ------------[ cut here ]------------
[  199.097893] camss_top_ahb_clk status stuck at 'off'
[  199.097913] WARNING: CPU: 3 PID: 728 at drivers/clk/qcom/clk-branch.c:91 clk_branch_wait+0x140/0x160
...
[  199.100064]  clk_branch_wait+0x140/0x160
[  199.100112]  clk_branch2_enable+0x30/0x40
[  199.100159]  clk_core_enable+0x6c/0xb0
[  199.100211]  clk_enable+0x2c/0x50
[  199.100257]  camss_enable_clocks+0x94/0xe0 [qcom_camss]
[  199.100342]  csiphy_set_power+0x154/0x2a0 [qcom_camss]
...
[  199.101594] ---[ end trace 0000000000000000 ]---

Link the CAMSS power domain in camss_configure_pd to make sure it gets
enabled before CSIPHY tries to enable clocks.

Fixes: 02afa816dbbf ("media: camss: Add basic runtime PM support")
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
---
 drivers/media/platform/qcom/camss/camss.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 1ef26aea3eae..9aea8220d923 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -1453,6 +1453,7 @@ static const struct media_device_ops camss_media_ops = {
 static int camss_configure_pd(struct camss *camss)
 {
 	struct device *dev = camss->dev;
+	int camss_pd_index;
 	int i;
 	int ret;
 
@@ -1496,7 +1497,13 @@ static int camss_configure_pd(struct camss *camss)
 		}
 	}
 
-	if (i > camss->vfe_num) {
+	/* Link CAMSS power domain if available */
+	camss_pd_index = device_property_match_string(camss->dev, "power-domain-names", "camss");
+	if (camss_pd_index >= 0)
+		device_link_add(camss->dev, camss->genpd[camss_pd_index], DL_FLAG_STATELESS |
+				DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE);
+
+	if (i > camss->vfe_num && i != camss_pd_index) {
 		camss->genpd_link[i - 1] = device_link_add(camss->dev, camss->genpd[i - 1],
 							   DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME |
 							   DL_FLAG_RPM_ACTIVE);
-- 
2.40.1

